Pavilion 500: Startup of Windows 10 work not

Similar Questions

• Must regularly restart the DHCP Client - HP Pavilion 500-205 DT - Windows 7

  HP Pavilion 500-205 DT - Windows 7 Home Premium 64 - bit SP1

  Realtek PCIe GBE Family Controller - pilot 7.67.1226.2012

  Bought 3 identical machines for our daycare. Set up the same. All work fine except ONE of them becomes inaccessible periodically (every day more or less) on other computers on our small LAN-to-peer Windows. You can see, but cannot access any shared folder. To access OTHER computers on the local network of it there is NO problem. All 3 machines have the same profile sharing, workgroup, permissions, AV, firewall, all settings. I realized by restarting the computer solved the problem immediately but temporarily. I reduced to restart the DHCP Client service. Do all works well immediately, but temporarily.

  I tried the things:

  Call support HP - not useful at all. It is under warranty.

  IPv6 disabled

  Disabled wireless

  Disabled network card stopcock energy saving

  Definition of recovery CLIENT DHCP on:

  First failure = restarting the Service

  Second failure = restarting the Service

  Subsequent failures = restarting the Service

  Reset Fail Count after = 120

  Restart the Service after = 0

  But again, this is not the case for other machines with the default settings. Nothing works except the Client DHCP service is restarted. Loss of access occurs with or without someone connected or using it. It has happened since its first establishment.

  I don't know if the HP warranty covers the OS loaded at the factory. I don't want to restore the thing and start over. I'm not a Pro, just the guy in the office who did these things, but it seems that the network card may be faulty. I don't know if I can convince a person of first level support phone to have me bring the machine in an approved place.

  Any help greatly appreciated,

  Larry

  HP sends a FedEx box to put the thing in picked it up. I'll mark this resolved thing. Thank you all for your comments!

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• HP pavilion 500-023w (installing windows 7 questions)

  I just bouth HP pavilion 500-023w desktop PC recently.  It was pre installed windows 8. I tried to install windows 7. Finally, I installed windows 7 but I need the software drivers for my "HP pavilion 500-023w.

  I tried to download HP Web sites, but these drives only work for windows 8.

  So he will be busy if someone can give me the software drivers links that works perfectly on windows 7 for my "HP Pavilion 500-023w".

  Faisal

  Hello

  No, now, try this:

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56998.exe

  Kind regards.

• HP Pavilion dv6-6c40ex: HP Quick Web works not

  Hello!

  Until November 5, 2015 HP Quick Web worked fine on my laptop. But now it is not. When I connect you to the screen showing only black HP Web quick, even tried to open it from the Home button. Web launcher does not, the parameters and the widgets also do not open. Help option also does not work. Can you help me?

  Kind regards
  Joseph Francis H. Dubal

  Hi @Rajendranath,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-6c40ex Entertainment Notebook and issues with programs not working not properly. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. I recommend somewhere around November 1, which ensures that the parameters that have been changed are fixed.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Please let me know how it goes.
  
  By clicking on the Thumbs Up below, you can say thank you! .
  
  Thank you.

• Pavilion G7 1355 A9Y70EA: windows update does not

  I had to do a complete reinstall of my windows 7 and even recovery if everything else seems in good condition, the function of windows update does not work despite my now do a restore complete 3 times and also executes all microsofts fix programs for this problem, also tried several fixes YouTube, but nothing works , are getting desperate now. He said only updates and the small bar just keep on crossing of forever with nothing else to be... Help...

  Thans for the answer, I understand what you say, it's just that, until I discarded the computer a few days before (by foolishly following a tip to youtube to speed up computer that has totally stopped it start) windows update worked very well and it has been since a windows 10 installation and a removal of windows 10 the next day a few months ago. The folder c:\Windows\SoftwareDistribution/windows/download exist with only 2 files with names very long gibberish and it is only 15 kb and the other file is 39 k, which seems to be far big enough for any update. I was wondering if instead of the clean install from the recovery partition would be any different doing a clean install from the recovery disks that I did when I got the laptop? see you soon

  Made no difference with update disk and these 2 small updates are only updated Adobe and after 3 off straight, the bar is still meandering along, my update history shows only updates from 2012 when win7 was installed everything first... * beep * Microsoft!

  P. S.

  Yesterday, I decided I had enough and started to install windows from a download 10 earlier, but after it began, I thought "no you know you hated" so I canceled the installation. That's about 3 hours later when I went to stop the laptop it says close and install the updates, so, after 4 hours of installing updates 251 and restarted then installed another 41 updates, then again on the next closure, so basically, I think that the few installation the windows 10 made seemed to start updates to speed?

• Printer Panasonic kxp 2123 xp of windows 7 works not very well

  Printer Panasonic kxp 2123 not work windows 7 works very well xp

  Hi, Oliver,.

  Have you installed the printer software?

  http://www.Panasonic.com/business/documents-Imaging/downloads.asp

  It works with Windows 7 before?

  Are you receiving error messages?  Post back verbatim, if you please.

  Look in the event viewer for errors that coincide with the date and time that the printer did not work.

  If the software has been installed and the printer worked, try the following:

  Start > type services.msc

  Press enter

  Scroll down to print spooler

  Right-click on the spooler and select stop

  Wait for Windows to stop the spooler

  Go to control panel > printers folder

  Right-click on the printer icon, then select open

  Do you see the documents listed in the print queue?

  Click file > cancel all Documents

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Select Device Manager

  Click on the + sign next to Ieeee... compatible printer

  Right-click on the driver and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  While the printer is turned on, unplug the cable from the printer

  Unplug the cable from the wall outlet

  Leave 5 minutes

  Plug the cable into the wall jack, and then the printer

  Restart your computer and let Windows install the drivers

  Open Services.msc and start the print spooler (follow previous directions)

  Try printing again

• Windows Defender works not properly

  I have a message that windows Defender does not correctly error Ko 836941

  There are about 20 errors in 836941 KB we call transient errors of networking because that in most cases, if the update is restarted the error disappears and the update succeeds.

  Because Windows Defender to use WIndows Update to receive updates of signatures (about every 8 hours) it can experience these same symptoms.

  Please report the following:

  If you manually raise the update he succeeds?
  This specific hex code error message do you receive?

  Robert

• Windows startup error: Windows NT did not quite long memory

  WHEN I START MY SYSTEM FOLLOWING MESSAGE APPEARS:

  • "WINDOWS NT HAS NOT RECOVERED MEMORY FAIRLY EXTENSIVE." 7 MB OF MEMORY SPAN IS REQUIRED TO RUN WINDOWS NT., YOU NEED TO MAYBE UPGRADE YOUR COMPUTER OR RUN A PROGRAM OF CONFIGURATION PROVIDED BY THE MANUFACTURER. »
  • Memory card:
    00000000 - 000 A 0000
    00100000 - 00110000

  WHY THIS MESSAGE IS DISPLAYS?
  PLEASE TELL ME.
  ME.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Also check the BIOS memory settings.

  J W Stuart: http://www.pagestart.com

• HP Pavilion 15 notebook pc WINDOWS 7 is NOT GENUINE BUILD 7601

  PLEASE HELP ME TO SOLVE MY PROBLEM MY PRODUCT KEY WAS VISIBLE O HP SUPPORT ASSISTANT, BUT THE KEY TEN FIRST MARKED AS XXXXX XXXXX SO THAT I CAN NOT ACTIVATE MY SYSTEM. HOW DO I FIND

  . MY WINDOWS 7 IS NOT GENUINE PLS HELP TY GOD BLESS US ALL

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  It is normally the result of one or more corrupted files 'Activation' of Windows or a problem with the BIOS of the computer. Dell, HP, Toshiba, Sony, computers etc that come with the use of Windows 7 a pre-activation SLP/OA 2.1 System. This system requires a BIOS with an SLP/SLIC 2.1 table to activate a SLP 2.1 OEM Windows 7 product key and a "certificate" of SLP 2.1 OEM. If any on these is damaged or missing, Windows will become "non-genuine".

  Back up all your personal data and files, then recovering your computer to a factory State. This should solve the problem. If this does not resolve the problem, you may have a problem with the SLIC table in BIOS. Please report back with the step that you tried and the results.

  Alternatively, if you still can still read the product key 25 character on the Microsoft COA affixed to your computer, try to use it to activate your computer.

  If you have any other questions, feel free to ask.

   

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• 500-189 Pavilion: Pavilion 500 - 189 DTS Sound + Equalizer does not work in Windows 10 Pro

  I have upgraded to Windows 10 (Pro). The sound works, but now the equalizer of the + Sound DTS Panel settings have no effect. Is there an audio control panel to update can you tell me? Thank you!

  Problem solved: I uninstalled the IDT High Definition Audio CODEC (Device Manager > sound, video and game controllers) then restarted. Now it's working.

• 23-1015 Pavilion: Pavilion 23-1015 installed windows and now not wifi

  I have a HP Pavilion while a 23-1015, he had some virus on it so I tried to restore the plant. Ended up having to reinstall windows 7 on it. He said that was not installed the driver for my network connections, so I downloaded the hp Realtek driver. Still no luck. It says device disconnected or broken. Wireless was fine until I have restore. Someone has an idea what is happening?

  Hello:

  I think you need this driver so that the wireless card to work... The Realtek driver is for the wired network adapter.

  This package provides the driver for Ralink Wireless LAN Card solutions in the supported models that are running a supported operating system.

  File name: sp58084.exe

• EliteBook 8760W: upgrade of Windows 10 works not

  I am trying to upgrade Windows 7 Pro for Windows Pro 10, with little success.

  I spoke to Microsoft and they advised that my computer (bought in August 2012) cannot have been tested by HP to be compatible with Windows 10. As the computer is out of warranty, I find it difficult to communicate with anyone at HP to verify its ability to upgrade.

  Can you advise me on what my next steps should be?

  • Model: HP EliteBook 8760W

  • Operating system: Windows 7 Pro 64-bit, SP1

  • 24 GB RAM
  • 1 Tb SSD
  • Purchased: August 12, 2012

  Thanks in advance

  NCDnick

  Hello;

  Let me welcome you on the HP forums!

  I've updated several PC Win7 Win10 - and they had all these problems in one way or another... so I wrote this to provide advice to people considering such update...

  You think about the amount of work that you want to post just to run Win10.  Seriously.  Old machine Win7 tend to come in two flavors when it comes to upgrading Win10 - really easy and really difficult.

  The really hard to upgrade computers fall into two categories: (1) those who are expandable to Win10 and works OK, (2) those who are not.

  Computers laptops HP, especially old Win7 machines, often came with two different graphics - and Intel chips and then either a processor AMD or Nvidia.  This was known as switchable graphics card or hybrid.  You have run using the Intel chip most of the time, but when you need additional graphics power, as in the game, the PC automatically switched over to the use of the AMD or Nvidia graphics chip.

  Problem is, this requires special graphics drivers to work, and while that those that are preinstalled on laptops Win7, these drivers simply do not exist for Win10.  These drivers are not available from Intel, AMD or Nvidia.  One way to tell if your PC has two different graphics chips is to look in under Graphics Device Manager.  If there are two different cards in the list, an Intel and AMD/Nividia, then you have this problem - and if you force an upgrade to Win10, you will have serious graphic problems and your machine will not work.

  However, if you do not have this problem, to CAN pass to Win10, but you must be willing to do four things:
  (1) do a full image backup of disk external drive or USB stick, capacity
  (2) changes to the reserved system partitioning hard disk recommandΘes mΘthodes,
  (3) use a different approach and maybe more than one, as Windows Update to do the upgrade,
  (4) prepare for a clean install.

  ---------------------------------
  1: backup of images:
  This is VITAL, because the machine is doomed to failure of the upgrade, and when that happens, you will learn that GoBack to Win10 function is NOT reliable, and that can leave you with a corrupt machine that will require the factory reset and lose all that on it, to get it working again.

  You can avoid this by making an image backup to an external hard drive or a USB drive using Macrium reflect (MR), which provides a FREE version that can be used to image and restore partitions or drives together.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  ---------------------------------
  2: System reserved for resizing:
  There is a small partition on the HDD with Win7 preinstalled machines known as system reserved.  It is something known as the boot loader code.  There is 100 MB format: all that is necessary for Win7.  But Win10 needs 350 MB and, in some cases, is NOT able to resize it on its own.  IF this happens, you must manually use a partitioning tool to resize it yourself.
  ---------------------------------
  3: use a different approach to upgrade:
  Windows Update is the simpler, but less reliable, way to do the upgrade from Win10.  A much better and more reliable way is to use Microsoft Media creation tool: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10 choose the upgrade this option now PC.

  After all this, you know that MS install drivers with only the most basic features.  Given that HP does not have drivers for your PC Win10, this limited functionality is the best you're going to get.  HP does not actively write new drivers from Win10 for the old PC Win7.  To keep all the features of your PC, your best shot is NOT to upgrade to Win10.
  ---------------------------------
  4: be prepared to clean-install:
  If you do all this, and after the upgrade, your PC works partially, this means that the upgrade is not well and stuff is still there the previous OS corrupt the functionality of Win10.

  You MIGHT be able to solve the problem in fact a clean install of Win10. Problem is that, often, a clean-install does not recognize prior activation, even if it should. So, before doing the upgrade, follow these instructions on the community forums Win10 on creating a genuineticket.xml file: http://www.tenforums.com/tutorials/23354-clean-install-windows-10-directly-without-having-upgrade-first.html

  You need more later to activate your pc Win10 after the installation of clean.

  -----------------------------------------------
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Windows will work not day after I installed the windows updates.

  The next day, I installed the Windows updates, I turned on my laptop a short Vaio splash screen is displayed and a black screen comes up saying that "Windows couldn't start. A recent hardware or software change might be the cause. "I don't have the installation disc of Windows that it suggests to use the software is preinstalled.  The safe mode and last known good configuration and the start windows normally get Windows running.  It is simply scrolls a list of code and ends with a line crcdisk.sys, goes to a blue screen for less than a second, then goes to black screen.  All the help I could get to address this issue would be greatly appreciated.

   

  If Safe Mode doesn't work no and you don't have a Vista DVD from Microsoft, do a repair disc to do a startup repair or a system restore:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion 6340: HP Pavilion 6340 Desktop with Windows 98, said "Not found operating system".

  I have a desktop HP Pavilion 6340. The operating system is Windows 98. (Yes it's old). I have not used it in a while but it has been in a local clean and clear. When I turned it on with the hope of finding some articles that I had out there in Microsoft, the following appeared on my screen: "operating system not found '. I have the original HP Pavilion recovery disk (there are 2 of them). My question is: can I reinstall these discs and NOT to lose any Word or Excel documents that are out there.

  I try to avoid big costs back to Best Buy. Hope someone out there can give me some advice on this.

  It turns any external hard drive in a hard drive temporarily. which allows to retrieve and transfer your data on another computer