Pavilion a1647c bsod after sp3 install

Similar Questions

• After SP3 installed, unable to connect to the internet, etc.

  Installed SP3 now can not connect to the Internet or the local network resources if I can ping.   .. And the router sees my laptop and authenticates.   Ipconfig all withdrew them.  Information using fixed ip.  DHCP has never worked on this laptop because I have owned. I have tried many many suggestions on this support site that none have worked.  Any other ideas?  We did even restart router as a cause, it seems to resolve DNS names.  We don't have a dedicated dns server is just the router.  It seems even with fixed DNS the ip in the ip settings the router which is what we always used, it does not work.  I could not enter information in the lower body so had to go into the details here.  So I think it boils down to this... When I installed sp3 there is something that makes dns does not resolve so even though I can ping, be pinger and am authenticate to the net again I can not access resources or inet.  Help please.  No support for sp2 more but most everything worked fine.  Had a problem so I decided to go ahead and install and that's what happened.  Have uninstalled and reinstalled with the same results.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. the computer is currently fully patched to Windows Update?

  5. Why was it not installed SP3 years ago?

  ===================================

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  A Windows XP SP3 computer loses wireless connectivity when it returns to sleep or hibernation, or you receive an error message when you try to put the computer to sleep or into hibernation:
  http://support.Microsoft.com/kb/951447

  Windows XP SP3 on client computers can access the network when some DHCP information are not available
  http://support.Microsoft.com/kb/953761

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates Windows XP - I can save updates after SP3 installed

  original title: Windows XP updates.

  I have windows xp sp3 installed on my system. My question is, can I backup windows updates published after SP3 on cd or dvd so that I can use them again after you have reinstalled windows. It's winning time of update again after reinstalling windows XP WITH SP3.

  Security updates are available on image files CD ISO-9660 starting from Microsoft Download Center

  http://support.Microsoft.com/kb/913086>

  You can also download individual updates from the catalog and save to be installed later.

  http://v4.windowsupdate.Microsoft.com/catalog/en/default.asp>

  You can also download individual updates from the catalog and save to be installed later.

  http://catalog.update.Microsoft.com/v7/site/home.aspx>

  Click the Add button for each update you want to download. Once you have what you want, click on the link "go to download basket. Type or browse to the location where you want the saved updates to and then click on the button "Download Now".

  Once downloaded, you can then burn to CD.

  How to download drivers and updates from the Windows Update Catalog or the Microsoft Update Catalog

  http://support.Microsoft.com/kb/323166>

  Other links that may be useful:

  Search for a download

  http://www.Microsoft.com/downloads/search.aspx?displaylang=en>

  How to install multiple Windows updates or hotfixes with only one reboot

  http://support.Microsoft.com/?kbid=296861>

  For security and other fixes published for a given month:

  http://www.Microsoft.com/technet/security/bulletin/Ms#-* .mspx >

  Replace # with two-digit year

  Replace * with the three-character month abbreviation

  There are reported for that month, you will see the list of 'critical' patches 'important' for this month

  Check the 2nd Tuesday of each month - later in the day.

  For just the list:

  http://www.Microsoft.com/technet/security/current.aspx>

  Courtesy of MVP Harold Horne

  UTC/GMT is 08:41 on Tuesday, October 18, 2011

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• My HP Pavilion zv5240 running WindowsXP SP3, its power off suddenly by itself after running for 20-30 min. eventhough works on economy mode. What is going on?

  My HP Pavilion zv5240 running WindowsXP SP3, its power off suddenly by itself after running for 20-30 min. eventhough works on economy mode. What is going on?

  This could be an overheating problem.  If your CPU overheats, then the power will suddenly cut to your computer.  Boot safe mode starts with less processeses and running tasks and so your computer can run more fees.  Since you get 20 to 30 minutes, the way to check this is to download and run freeware 'CoreTemp '.

  <>http://www.alcpu.com/CoreTemp/ >

  It displays the temperature of your CPU and show you if it is not too hot before you stop.

  The two main causes of overheating are fans of CPU does not and a build-up of dust in your computer that acts as a blanket and causes overheating.   If overheating is your problem, open the case, check the appropriate fan and buy a can of compressed air to blow the dust bunnies.

  Another possible cause is bad RAM (memory) memory modules.  Try to remove and re - insert your RAM modules.  There are also tests of RAM, you can run - although they tend to be CPU, so you won't know if you have a RAM problem or a problem of temperature.

  HTH,

  JW

• BSOD after installing the update of Norton on HPg7

  Laptop has been random and very frequent BSOD after an automatic update of Norton. Tried everything but that remove Norton stopped the problem. Deleted Norton several months ago without even a recurrence of the problem therefore reasonably certain that the cause was the Norton. Myy question is what anti-virus program is known to work reliably on HP g7? Currently to have not installed because I don't know wht will run.

  Hello

  Fewer hogging resources & a pretty decent anti-virus software which can only be invoked:
  Windows 7 & Vista: http://www.microsoft.com/security/pc-security/microsoft-security-essentials.aspx

  Windows 8: http://www.microsoft.com/security/pc-security/windows-defender.aspx

  Kind regards

• After you install Windows XP SP3, I am unable to use my modem.

  I had Windows XP2 on two of my computers and one day he came with an update for XP3 it says that you can download now so I asked data doctors on this issue and they said yes go before I did. But now I can't use my modem that I paid for new install when I bought them. When I tried to put in place my fax modem it askes me to insert the CD XP3, but I do not because I upgarded to line. How can I remove XP3 and reinstall my XP2 I still have my cd, s on both computers.

  original title: I got Windows XP2

  I guess you could uninstall service pack 3 (using the control panel > Add / Remove Programs), then install Services of Fax and then reinstall the service pack 3, but I do not know the consequences of doing this on all the updates post-sp3 installed.

  (If you really want to do it this way, I suggest seeking advice from experts in the Windows Update forum posting asking "is it safe to uninstall and reinstall xp sp3".  Include in the body of your message a question on post-sp3 updates).

  Because you have a Windows XP sp2 CD, the best thing for you to do is to create a CD of XP sp3 using the process known as "slipstreaming."  If you have a CD burner on your computer (i.e., a CD player that can write as well as to read the CD), it is a relatively easy thing to do - and it's always good to have a handy day XP installation CD.

  There are many websites that explain how to do this.  Here are 3:

  http://www.bleepingcomputer.com/tutorials/slipstreaming-Windows-XP-to-create-bootable-CD/
  http://Lifehacker.com/386526/slipstream-Service-Pack-3-into-your-Windows-XP-installation-CD
  http://www.winsupersite.com/article/product-review/slipstreaming-Windows-XP-with-Service-Pack-3-SP3

• problem with the firewall/ics service after xp sp3 installed (internet connection sharing)

  a humming with no problem.  recently purchased office 2010 and, if necessary, to upgrade to xp sp3 to install.  SP3 installed, now unable to connect.  can not turn on the windows firewall.

  When I try to activate the windows firewall I get the following message:

  Windows cannot start the windows firewall/internet connection (ICS) sharing service

  read some other solutions, but some seem to be beyond my skill level and/or are related to an sp2 update.  wanted to know if there is a more current solution.  any help much appreciated.

  I'll take the issue here then.

  Install, upgrade and activate Forum
  http://social.answers.Microsoft.com/forums/en-us/XPInstall/threads

  I don't know what causes your problem. Sorry, joc512.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I pay Charter for 100meg a dry... After you install Firefox v20.0.1, now I have 3.5meg a s... What happened to my system?

  I am running Windows XP Home SP3. I had been using Firefox v4.0. I didn't give it up. I finally decided to update today (05.06.2013). I get 100 MB dry by charter.com for the last year or so... After I installed Firefox v20.0.1 and restarted my system... I always restart after the installation of new software... my internet connection has been lowered to 3.5 mb a second I tested it by going to speedtest.net and speedtest.charter.com. .. .i called Charter around 21:00... We went through the whole process... all power off and unplugging everything... speed never changed. The guy said that the modem looked good on his end. Then... something has changed on my system, my system is not the way it should be... all programs that I have internet access have the same problem... Help, please...!

  These test sites use the Flash plugin, so you can control the problems with this plugin in.

  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Satellite A200 - BSOD after downgrading from Win Vista to XP Pro

  HII

  I bought a Satellite A200.
  The windows vista family edition was the operating system that was installed.
  Compatibility issue with a particular software that I use, I changed the vista by a XP Professional SP3.
  But since then, the computer crashes and present a blue screen. I wish I had some ideas to solve this problem.

  Thank you

  Hello

  The BSOD can be caused by the problem of hardware and software problem.
  In your case it seems s due to software problem. Maybe a few compatibility problems between certain parts of the software

  First you need to check if you are using the version of Win XP BIOS Yes this laptop needs a Win XP BIOS, which could be found on the European driver Toshiba page.

  I m also interesting when the BSOD appears you installed Win XP successfully or it was not possible to install the XP because the BSOD?

  If you were not able to install Win XP then I guess you don't have included SATA drivers participating in the crib on Intel Matrix Storage.

  I recommend some threads here in the forum about this theme.

• BSOD after windows upgrade from Home Premium to Vista Ultimate

  Hello

  I have a brand new A200 - TH1 comes with Vista Home Premium installed Edition. I had to install Vista Ultimate to get the job in Sql Server 2005 Reporting SERVICES. Upgrade Windows at all times managed without problems or errors. The problem is that my system gets now BSOD about 20 times a day. Its extremely unstable. I have restored to Home Premium using recovery disks, everything is stable until I apply vista ultimate improvement. I tried the upgrade without having to install any other software, shortly after my system crashes with BSOD 0 x 00008086. Any help would be greatly appreciated. Vista Business Edition would be the surface, but there is no upgrade for this. I am very confused as to why a skeleton of the system from vista home premium to vista ultimate would cause my sysytem so unstable... IF I run the windows upgrade advisor it says the following: (I installed the lastest 4965AGN driver and Bluetooth supplied with the system is the last available (5.0.1023.0)

  ACPI Bluetooth
  After you install Windows Vista, this device will require an updated driver. For the latest driver, go to the Web site of the manufacturer of the device or contact you the retailer.

  Numtxpackets® Wireless WiFi Link 4965AGN
  Before you install Windows Vista, go to the device manufacturer's Web site to download the latest driver for this device. After you install Windows Vista, install the registered driver.

  Any help would be greatly appreciated...

  Hello Jack

  I imagine that you have these problems, because a few months ago, I read an interesting article on this update and it was written on possible problems after the upgrade procedure. I installed a few times Ultimate on my A200 but as new installation.

  What you can try is to install the OS by using recovery media, delete all the stuff designed by Toshiba, including all other software like Norton. After doing this upgrade brand.

  When the upgrade is complete, install all the stuff of Toshiba order following facilities described in the instructions for Installations. I A200 with Vista Home Premium but I don't have a media Anytime upgrade and cannot test with my Satellite.

• Windows update fails to Downlaod after clean install

  Hello

  Im having problem installing windows update after clean install (although it happned to me after GHOST as well)
  On my new computer, I have 2 updates of isnatll 1:
  (1) Windows Genuine Advantage Validation Tool (KB892130)
  (2) update for Windows XP (KB898461)

  When I try to install them by using "Windows Update" or "Microsoft update" I get the following error code: Error Code: 0 x 80246002

  someone meet souch problem?
  When google for a solution based on this error code I found nothing.

  Thank you very much for your help,
  see you soon

  What were the problems you saw that you thought a "clean install" of Windows XP could solve?

  This "clean install" included formatting the HARD drive?

  The "clean install" left you with WinXP WinXP SP1, WinXP SP2 or WinXP SP3 gold (no Service Pack)?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a test free version comes preinstalled when you buy it and that would have been reinstalled, but invalid, when you did the clean install)?

  You receive an error code "0 x 80246002" when you use Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958056

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• SP3 Install Fail

  Have a Gateway computer.  Had to recover Windows OS.  Obtained as SP3 update and I have hit a brick wall.  It goes throughout the download process and then gives me an 0x8007F070 error code.  I tried everything I could find on all the forums, but he can't get through.  Any suggestions?

  Follow-up-

  I reloaded the software from scratch.  The only thing I did differently was to hold off installing Internet Explorer 8 until after SP3.  (Last time I put on IE8 and then tried removing it-without result).

  I don't know if that makes a difference or not, but in any case, all installed with success this time.

  Good to know. For others following this thread:

  Always upgrade to SP3 before upgrading to IE6.

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• BSOD after 1 hour of computer use

  Recently, I've been doing the dreaded blue screen of death on my computer. I use XP SP2 Edition.

  It occurs usually after 1 hour of use on the computer, a message appears and it restarted the system has recovered from a serious error by saying so please inform microsoft this problem. A log of this error was created.
  What can I do?
  Help!

  Generally?  N °

  Of course - you may lose files with this question - so everything is possible.  ;-)

  That's why everyone who works with computers always harps on 'backups backups backups'--> after all, you have the opportunity to go back and get something that has been lost destructively in other aspects of life again to the * exact * same State?

  Service Pack 3 (SP3) was released more than three years ago: April 21, 2008.  Support for Windows XP without SP3 ended July 13, 2010.  If you download the SP3 installed, you will get some other updates that you really need - maybe 90 + of them.

  It's probably best you cleaning the computer some before attempting an installation of service pack 3.  Time - this will take, but in the end, you should end up with a much more stable and secure system - faster than ever possible.

  In the order shown, do not jump...

  First of all - download, install, operate and put to update and then run a full scan of the system with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will be * not * do the aggressive version):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Download Windows XP SP3 and save it to your desktop.

  Double-click on the downloaded file and follow the prompts to get SP3 installed.

  Your question may or may not be resolved after all that cleaning - such that it could even be hardware related.  Assuming that it is a desktop computer, when was the last time you picked up the machine off, bought a few cans of compressed air and opens the case and the breath in the dust?