Pavilion dv4 4620us: 2 beeps at startup

Similar Questions

• Pavilion 500-341nv: Six beeps at startup of PC

  Hi, I have a HP Pavilion 500-341nv and start-up power led goes off and I get 6 beeps and after that power led again beds and boots normally into windows pc!

  The problem is that I can't get into the BIOS Setup to disable secure boot, I tried hitting ESC or F10 at different times during boot with no luck, no idea how to get into the BIOS setup?

  Hello @Alimousios,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your desktop computer emits six times when it starts first, and that you are not able to enter the BIOS. I'd love to help you in this case!

  According to the information provided in this document on BIOS Beep Codesbeep codes six indicate a fatal error related to the operation of critical components - such as the CPU. To fix this, I recommend you contact technical support by clicking on the link below to get help from your region number.
  
  www.HP.com/contacthp/
  
  I hope this helps!
  
  Concerning

• HP Pavilion years 1240 g6: beep on startup without Starter

  At first until it beeps and it does not open. And when it opens start as normal video will not play

  Dear customer,

  Welcome and thanks for posting your question on the Forum from HP Support.

  Please open this web link to isolate the problem, you said it's beep check then the link given below to resolve the problem:

  http://support.HP.com/us-en/product/HP-Pavilion-G6-1200-notebook-PC-series/5145704/model/5170264/document/c01732674/

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• Pavilion dv7t-7000: Notebook keeps beep at startup

  I have a hp model pavilion dv7t-7000 with a (version F.29) Insyde bios that retains a beep on startup until the bios Setup menu appears.  This started in the last three months and went from occasional incidents to a constant.  Someone else has a similar problem, and if so, what can I do to fix this.

  Hi .in my experience the keyboard has a sticky key.
  And can be replaced.
  Is the pc still under warranty?

• HP Pavilion DV4-2045DX at startup screen 'black '.

  My HP Pavilion DV4 at startup screen 'black '. It normally happens with all audio prompts password and subsequently entry, audio acceptance... password screen but 'black '. This problem is intermittent, but happens on a basis more common. Any suggestions would be greatly appreciated.   Peace

  Screen is black from the beginning. Hooked up a monitor to laptop and everything's fine. Appears to be a screen, a problem of connection or link screen. Thanks for the input.    Peace

• HP pavilion dv4 - 1308ca startup problem

  My computor model is Hp Pavilion dv4 - 1308 CA, of my friend, I bought last year.

  now, that's the problem with me,I have activate, windows not starting not at the same time, 1 or 2, 3 hours longer after,

  windows starts. After using shut down or Hibernate.

  another time that I turn it on, it's the same thing again.

  idon't know how to fix it.

  OS version upgrate Windows 7 ultimateand computor ask me to replace the battery also.

  so I replace and using the power of 220 volt power supply.

  Please answer me... I really appreciate it.

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Kind regards

  DP - K

• Pavilion dv4: cannot install windows 8.1

  I installed windows 8.1, after installation on drive c. The PC reboots and start loading. But he remained at 8.1 windows logo. He drives half an hour. After saying the message "your PC ran into a problem needs to restart. What should I do? My PC information: pavilion dv4
  3 GB ram 32-bit.

  Hi @ismailbadhusha,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and problems with installing Windows 8.1. First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - has begun. Restart the computer after this stage and try to reinstall.

  Your system came with 64-bit Windows. You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  If you have an error message could you let me know what it is.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Pavilion DV4-1199es problem with sound

  Hello

  I have a Pavilion DV4-1199es, I did a downgrade to Windows XP, and I did it works ok, but when restart the laptop, the sound does not work.

  If I install MS patch KB888111xpsp2 or KB835221 immediately again works the sound, but when restart works again.

  Someone knows how to solve?

  Thank you

  Founded by Mariza solution:

  If you found that the sound was not working after reboot, follow the steps below

  1. download the devcon command-line utility, here

  2. extract and copy the file to c:\windows\devcon\i386\devcon.exe

  3. do the command line to restart MS - UAA automatically or just download this file

  Command line: C:\windows\devcon\i386\devcon.exe restart 'PCI\VEN_8086 & DEV_293E & SUBSYS_3607103C & REV_03 '.

  Notes:

  1. the location of devcon.exe is c:\windows\devcon\i386\devcon.exe that if change you it, you must change idt.bat

  2. "PCI\VEN_8086 & DEV_293E & SUBSYS_3607103C & REV_03' are for MS - UAA hardware ID, if you found in another name change it.

  3. place idt.bat in c:\Documents and Settings\All Users\Menu Menu\Programs\Startup

  4. the sound will restore within 6 to 10 seconds, because is NOT startup sound XP

• HP Pavilion dv4 stops unexpectedly

  Hey there,

  I have a Hp Pavilion dv4 Notebook PC I bought half a year ago. A couple of days, while I was working on my computer it unexpectedly closes. At first I thought it was because my computer was out of battery because when I turned it on, there was no charge inside. However, two days later it stopped again and when I turned it back on it still had about 21 percent of power left. I don't really know what could be the problem. I did a scan of the computer, health analysis and tested my battery as well and they were all aware.

  Any suggestions?

  Thank you

  Hello

  After that recovery of a judgment of my computer did a startup repair and concluded, there was a battery problem. I did a BIOS upgrade and THEN a battery check and my results showed that I had to replace my battery. So I did exactly that.

  Thanks for your time!

  NIDA

• Pavilion dv4-1220us SRS Premium Sound

  So I have a HP Pavilion dv4-1220us with SRS Premium Sound(printed on my casing and came with computer) I downloaded and installed the update of the BIOS for my laptop exact BIOS from HP (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75532-1&lc=en&dlc=en&cc=us&product=3860431&os=2100&lang=en) after you install the BIOS of my computer restarted. When it restarted it said I didn't have his windows automatically installed the IDT HD Codecc drivers but with SRS Premium Sound technology. I tried to download the audio drivers from HP (http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2100&lc=en&dlc=en&cc=us&lang=en&product=3860431), but not its SRS?

  How can I get my SRS Premium Sound work and back on my HP Pavilion dv4-1220us

  I had the same problem that you have done and did a Google search, which led me to this post.  Like you, I noticed on flashing the BIOS version F.52, Windows "found" high definition Audio Device as it has never previously been installed.  I realized he killed my SRS sound.

  I can tell you that flashing back to F.4A and installing drivers above brought back my SRS features in the IDT Control Panel.  I have flashing F.52 to F.4A (old version) without any problem.

  Support for Windows 7 was apparently introduced in F.4A and F.49, by their release notes:

  F.4a: Updates the OPROM Computrace to support the next generation of Microsoft Windows operating systems.

  F.49: Adds support for future Microsoft Windows operating systems.

  BIOS F.52 caused me the noise problem and also my laptop makes Beeping very occasionally when starting.  He also made Windows prompt me to "remove" the DVD-Rom drive in the taskbar...  Decommissioning of the BIOS took questions (and I lost one afternoon to do)

  Just trying to help...  If anyone has these problems, try flashing to F.4A.

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• Pavilion dv4-2155dx screen shows no info on the first boot

  My machine generally works very well, except for one annoying thing: on my previous Pavilion (dv4-1435dx), he showed the HP logo and a message that made me know I could press F2 or do anything to get into the BIOS setup screen.

  But on this machine, all I get is a black screen, which makes it very difficult to know when to start press any function button is necessary.

  Is there a way to turn it back on, or it has never been available on this model?

  If someone knows something, your help is appreciated!

  _______________________________________

  The PDADoc!

  I think that HP this disabled by default on new versions of the bios, use F10 to enter the bios and see if there is a setting, you can change to return to the home screen, or press ESC to show for this start-up cycle.

  Key to the new laptops HP options, everyone can work on your

  ESC = Boot screen

  F1 = Information System

  F2 = System Diagnostics

  F9 = Startup Manager

  F10 = Bios setup

  F11 = HP System Recovery

  F12 = Network Boot

  After using F10 to enter the bios use F9 to load the bios default settings.

  .

• HP pavilion dv4-2165dx entertainment notebook pc memory

  So I have a hp pavilion dv4-2165dx entertainment notebook pc, and he had performance problems lately, which im pretty sure are problem with him having no not enough memory.

  Yes, I'm going to clarify a bit before you go.
  I ran clean on my laptop, turned off non-essential startup programs and done everything I could think to preform better, but nothing helped.
  At the moment, I have chrome open with 6 tabs, Skype and League of open captions, as well as a few background programs such as Norton and Intel GMA HD Task manager said that he uses about 10% of my CPU, but about 60% of my memory. everything else on my computer seems to work perfectly, so what I'm wondering is if I upgraded the RAM in this laptop from 4 GB to 8 GB, if this would signifigantly increase performance.

  I've been watching little ram to replace with if this would work, but I'm near clueless when it comes to computers, especially the RAM, like not committing almost $100 in something only to find out it did nothing.

  This is the ram, I was looking to buy, which is PNY Optima PC3-10666 DDR3 SoDIMM 2 x 4 GB RAM that looks like $80, and I would like to know if it would work in my computer, and if it would solve my problems.

  My laptop is using the configuration by default he had when I bought it, but here are the specs, just in case they are required:
  CPU: Intel Core i3 CPU M 330 @ 2.13 GHz

  RAM: 4 GB installed, 3.8 usable.
  OS: Windows 7 Home Premium 64-bit
  Graphics card: Intel Graphics Media Accelerator HD
  Disk space: 446GB (322 GB free)

  If you need anything else, it just ask. I just really would like to help with this issue!

  Now we are getting somewhere. As I said, this is aka the PC3-8500 DDR3-1066 memory.

  It will work for you:

  http://www.eBay.com/ITM/new-8gb-Kit-2x-4GB-DDR3-1066-MHz-PC3-8500-SODIMM-laptop-memory-RAM-204-pin-/331118609920?PT=US_Memory_RAM_&hash=item4d18350600

  Your repair manuals

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• MacBook Air mid 2009 3 beeps at startup

  Hello world!

  I had a problem: after a few hours of videos online watch my book mac freezed with sound fixed.

  After that I pressed the power button and shut down the computer. After evil market see black screen and hear 3 beeps.

  Also: I have used all the key-combination to repair the situation, problem still there.

  P. S.

  ALT-CMD-P-R - give me long 3beeps - 3beeps short - long 3beeps

  And now I want to try a version:

  "Same for me here.

  My MacBook Air mid-2011 with 4 GB of RAM would be only 3 beeps on startup.

  "Put the logic card 8 minutes in the oven at 190 degrees celsius - was again very well then begin."

  of https://ru.ifixit.com/Answers/View/27783/3+beeps+on+start+up

  Dear Mac users, if you have and idea to fix my mac - please enter into this discussion.

  Good day!

  Problem with RAM.

  https://support.Apple.com/en-us/HT202768

  Please contact Apple.

• HP Pavilion dv4-1120br: doubts about the BIOS update for my model with the operating system current instaled.

  Hello

  I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.

  The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?

  Thanks for the help!

  Cantarino

  Hello;
  
  Let me welcome you on the HP forums!
  
  Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.

  Good luck