Pavilion dv6-1350us Entertainm: Pavilion dv6-1350 us running Windows 7 will not be closed

Similar Questions

• HP Pavilion running Windows 8 will not install several programs

  Hello

  I got my new HP Pavilion for about 2 weeks now and I was not able to get to install several programs. I can't install Adobe Acrobat or Reader, or my software (Kodak Easyshare) digital camera. At first I thought that this could be a problem with my firewall, bu the Kodak came a disc, not the internet. When I tried to install Adobe, it would download the files fine, but when I clicked on the installation software, nothing would happen (I give the permission to change my computer). For the program of the camera, she went through the installation process, but when I click on it nothing happens. Curiously, for other programs it has no problem. I installed Firefox and Skype without problem. I also tried to download Adobe frm IE10 and Firefox. I'm starting to think that there is something inherently wrong with the laptop. Any advice would be greatly appreciated!

  Of

  Brianna

  Hello Brianna35,

  Take a look at this document and let me know if the troubleshooting steps to help you solve your problem.

  Good luck!

• After restoring the system Pavilion dv7-4090 ca with Windows 7 will not play blu - ray movies.

  has worked before system restore now it shows only a white screen

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the installer for it on the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53029.exe

  When the download is complete, open windows panneau Panel configuration, open programs and features, right click the entry for HP MediaSmart DVD and select uninstall - once this process is complete, restart the laptop.

  When windows has reloaded, double-click the installer for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

  

• HP Pavilion dv6-6b57sa suddenly stopped working and will not now to power on. Help, please!

  OK, so I'm a new student and my laptop has just decided to stop working. I had the laptop for 2 years but I have not used until I came to College. Long story short, I wanted to use it as a working laptop and one im using now for media.

  Anyway, I started the dv6 and it was fine so I jumped to get a coffee. As I got home I heard a click and then the screen was cut off and now it will not turn back. I tried the hard reset, take out the battery for 15 minutes. The battery charge indicator does not come on either. I use an original HP charger and have connected it to a plug adapter multiple with an influx of cutting on it.

  No LED, no noise, no charge indicator. Can someone help me with this, extremely upset I've saved this laptop for her than to die in the first week.

  Not sure, but there's less chance of it. Given that the laptop is not put under tension with other adapters. You must take it to store to get the verified motherboard.

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• Pavilion dv6-3010 us: Windows 7 will not take paper

  My computer rejects the logon password. When I use the password, I get a message that "the user profile Service has no log on." The profile cannot be loaded. "If I enter an incorrect password, I get a prompt to a reset of Password Wizard, but requiring a reset disk I ever created. How can I get my computer? Help!

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 48 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  If none of the options above correct the problem, try the steps detailed in the guide on the following link.

  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-Lo...

  Kind regards

  DP - K

• HP Pavilion p6520y (win7) built-in wireless adapter will not detect ANY wireless network.

  HP Pavilion p6520y Desktop on Windows 7 Home Premium

  Error MESSAGE: "DO NOT CONNECTED - NO CONNECTION IS AVAILABLE" (from the tray icon of wireless with X red network connection).

  No changes to the system, in fact, it's brand new. I just want to use my built-in 802.11n Wireless LAN Card to connect to a network including all other PCs (laptops and desktop computers) can see.

  I tried a lot of things: toggle, adapter, adapter to uninstall/install, driver update (RT3090), PC restore/recovery, reset the router, change the configuration of the card (e.g., power management), all no. AVAIL.

  There is a port of type mini co - ax at the back of the tower for an ANTENNA which came with the PC. However, I think that the internal card could still detect a signal from 20 ft away without antenna. Isn't it?

  PROBLEM SOLVED:

  Of course, the last thing I mentioned was the cause. I have set up the office within inches of the wireless router and a signal (albeit low) was detected.

  So I guess the fixing of an antenna (which should have with my PC) will improve the signal reception when the office is further away (say 20 ft, or more). already checked radio shack with no luck.

  In any case, at least, I know what the problem is. Hope this helps someone in a similar scenario... See you soon...

• try to install GEFORCE GTX650 in my HP Pavilion p6 - 2413 has but the display will not illuminate.

  Try to install the GEFORCE GTX650 in my HP Pavilion p6 - 2413a, I plugged everything in and the fan seems to work but the display does not illuminate.

  There is another cable with 2 multi 1 6 end plug but I can't work out where to connect.

  I tried to find it on youtube but can't see where he's going to help me please.

  Hello

  You need a greater power to support a PCI-E power connector 6 pin. Try a Corsair CX500, or CX600. The image below is that of a NVIDIA GTX 650 which shows where to connect the PCI-E 6-pin connector to the graphics card.  Most of the HP PC which have a greater power or 460 watt have they support for the PCI-E power connector 6-pin.

  

• Pavilion a6400f: graph to run Windows 10?

  My PC will satisfy the requirements of graphics for Windows 10?

  The requirement is: 'graphics Microsoft DirectX 9 with WDDM driver '.

  I have "Intel GMA 3100" according to HP for Pavilion a6400f spec.s.

  Thank you.

  I think he should do just fine.

  If you are not sure, you can try to install the developer preview to check the operation of the system.

  But I don't know if you'll be able to get all the drivers for it.

  If you do not want to test, remember to save all your data and programs.

  If possible, create a proper backup of your current operating system. I don't want to end up with a PC that worked very well and got spoiled because of this

  Link to get an excerpt of dev for windows 10

  http://Windows.Microsoft.com/en-in/Windows/preview-ISO

• HP Pavilion g6 - 2288ca Notebook PC, Windows 8 will fail to start.

  Hi, I'm having a problem with my computer, everytime I try to start up my HP Pavilion g6 - 2288ca Notebook, I get one of two errors different blue screen. An error code says 0xc000021a and the other says 0 xC0000001. I then did a marketing test and it came back as follows;

  Hard drive DST short: failed.

  Failure ID: 64G57S-6B974S-MFPX0K60V803

  A solution any help is appreciated.

  Hello KVD.

  Welcome to the HP Forums!

  The error you mentioned shows that there is a problem with the hardware with the main hard drive. You can try to buy a hard drive replacement to HP PartSurfer if the computer is not in the warranty. If this is the case, you should be able to get the service on the HP support by phone. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns, and if it has helped. Thank you for choosing the HP Forums. Have a great day!

  Mario

• HP Pavilion p6110f registered CD-ROM/DVD-Rom will not play on hp Pavilion a520n

  The hp Pavilion p6110f DVD will play on other computer DVD players but never on my hp Pavilion a520n. Tried later dates for the a520n DVD drive still does not work.

  Hello:

  Try the fix for microsoft tool.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If AutoCorrect does not work, try the manual fix in the section "Let Me difficulty it Myself."

  http://support.Microsoft.com/kb/982116

  Paul

• HP Pavilion g6-1b53ca with wifi Ralink RT5390 will not run on 802.11n

  Hello.  Does anyone have any advice for the following?

  I have a laptop Pavilion g6 with a b/g/n wifi Ralink RT5390 card.  It works very well with my Linksys WRT54G and GS DD - WRT routers.  I recently got a new Linksys EA2700 with v1.0 of the Linksys firmware.

  The laptop again works very well with the Linksys EA2700 as long as it's WPA2 with mixed mode at 2.4 Ghz.  It shows connected to 54Mbps... which is g mode.

  Any ideas on why he used to connect fashion n greater speed?  It is only 5 meters and shows an excellent signal strength.  When I change the EA2700 from mixed mode to mode N... The HP error message just says... impossible to connect... the diagsnostics can't find anything.  I have a Samsung wifi phone and there is no connection problems in n to the same router EA2700 mode.

  The laptop shows the RALINK RT5390 as with the 3.2.13.0 version in Add/Remove Programs section.  The shows 5.0.9.0 device driver date device driver dated 27/11/2012

  Thanks a lot if anyone can make comments.

  Edward

  Hi, Edward:

  Please see if updating the driver to the latest version of help.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  Then go to the Advanced tab for the device in Device Manager and check if there is a bgn mode to select.

  It is possible that the pilot, that you have only has an auto or b/g mode.

  You can also check first before updating the driver.

  You should get 65 to 72 Mbps on the 2.4 GHz band.

  The card can receive and transmit on the 5.0 GHz band.

• Pavilion HPE h8 - 1360t: update to Windows 7 will not

  I made the fatal mistake of upgrade with a new installation of Windows 7 HJome Premium to Windows 7 Professional. After a lot of hunting to find the various missing drivers of WIndows, I was able to install a fuly operational Windows 7 Pro, but now I find that it will not update. I spent hours to examine and try the many "patches" (often contradictory) found on the Internet, but none of them did actually resolve the problem. The failure of Windows 7 update seems to be a very common problem, so I'm puzzled as to why there is no simple cure proven. It seems that I need to return to the Home Premium, but I thought I would try the forum before travelling.

  Hello

  That's the problem.

  Please read this article, in its entirety, by Ed Bott.

  The use of the Win 7 cumulative hotfix eliminates the problem.

  Jay

• Pavilion 15 laptop: partition recovery it but will not use

  Recently, I tried to restore my pc to factory settings using the hp Recovery Manager (something like that) by pressing f11 at startup. It says cannot find the recovery partition, but I can see the 18 gb + files in a recovery partition when I look at 'my computer'.

  What should I do? Recovery discs are not an option because I lost the ones I did

  If you are not able to access the recovery partition by pressing F11 at startup, the recovery partition can be damaged.

  The only option is to use the recovery discs to reinstall the OS. But if you do not have the recovery disks, then you can get the HP discs.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  AntonyG1
  Although I am an employee of HP, I speak for myself and not for HP

• Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

  I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

  Thank you

  Hello

  As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

  http://support.HP.com/us-en/document/c00033108

  Your machine could be the following:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  If so, the #4 on the following manual page it support 16 GB max:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

  Kind regards.