Random BSOD after upgrade to Windows 7 for Win Vista

Similar Questions

• Satellite L300D BSOD after upgrade to Windows 7

  I got this laptop (Satellite L300D) for a little more than a year with windows vista (32-bit) running and there were no problems. However, I've recently upgraded to Windows 7 (x 64) and became the problems since the first reboot.

  On the first reboot after installing windows 7, the computer off just after the "Starting Windows" screen Turn on again took me to the repair of the system where he performed a system restore and I was able to start successfully even once. I thought that the problem had something to do with the automatic updates, so I disabled the and tried to restart to see if the problem has been corrected. This time, after the "Starting Windows" screen I got a BSOD of unrecoverable system error. After several attempts to reboot and multiple attempts to repair system (which usually says she didn't) it started correctly again.

  This problem has been going for about 3 weeks now and it is quite irritating. The results of the system of compensation for claims that a "Boot critical file is corrupt", but it starts eventually after several attempts to start. He also has a habit of turning at random during the race (it happens about once or twice a day). So from now on, whenever I chaque fois que je tente tries to start my computer it shuts down after the start screen or give the BSOD and restarts and the only way to make it work seems to be to keep trying to start and hope for a successful boot of the system upward (this happens finally after a few failed attempts).

  I did some research on this and came to [this | 1251 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 & os = & ct = DL & selFamily = 1073768663] page. I think that's exactly what my problem is (need to update the BIOS), but if I understand correctly installing windows to do this only for 2000/xp/vista and I am unable to use the second option to boot from the disc as I get the BSOD before he gets to that point. I should try the windows install option although I am running windows 7 or is there another way to update the BIOS? Or I'm off completely and the problem is with something else?

  I wasn't sure what information I would like to add to this post so if need more information please let me know.

  Thanks in advance

  Edit: Oops, just realized the page I linked is not link to exactly what I had opened. I do not speak of 'critical BIOS updates for Windows 7 64-bit' under 'support form '.

  Post edited by: Jacob27

  Hello

  First of all, it would be interesting to know what code BSOD, you get exactly. Can you post this information useful? Normally, on the Microsoft Knowledge Base, you can find additional information about most of the BSOD codes and so you can start to solve this problem.

  BSODS are often associated with drivers or RAM/HDD. The latter, you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for the HARD drive. These two tools are free and you can find it using Google. You can download an iso image of them to create a bootable media where you can start the test.

  Regarding your update to the BIOS: I put t know what L300D you have exactly, but according to the Toshiba site it shows an update of the BIOS also for Windows 7 64-bit. You can try to install it.

• Satellite L300-215 - BSOD after upgrade to Windows 7

  Just upgraded 32 bit Vista to Windows 7 32 bit but keep getting BSOD (Blue Screen Of Death) when using the laptop. The events of the problem like log file below and it fails every time is same error code except BCP2 can change different Hex value.

  Have Toshiba upgrade disks used and all uninstalled programs that he asked me to do it before installing Windows. Model is L300-215 and laptop worked OK before upgrading to Windows 7. Have you tried the drivers audio and graphics of the site Web of Toshiba (old version of what was on the laptop after upgrade), but always the same question :-(

  Any help would be appreciated if someone else seen this error before?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 4th
  BCP1: 00000007
  BCP2: 000B458A
  BCP3: 00000001
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Hello

  When you get exactly this BSOD? Happens immediately or if you start a certain application?

  Have you checked for yellow exclamation marks Device Manager? Maybe a driver isn t working properly and you should update it.

  Also make sure that your BIOS is up to date. You can download the latest version on the Toshiba site.

  Last but not least blue screen often associated drivers or memory modules defective RAM. The latter you can check using Memtest86.

• Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

  Hey all,.

  I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

  My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

  Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

  

  If you follow this step 3.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

  You will need to select "format and repartition disks" as windows 10 will have changed partitions.

• NFC power option is missing after upgrade to Windows 8 for windows 8.1

  Recently, I upgraded my Sony Viao F15218SNB of windows 8 for windows 8.1. Now I have problems with the options of the NFC. Before, I had the opportunity to become the NFC adapter power on and off (like the ability to enable and disable the wifi and bluetooth) but now after the upgrade to windows 8.1 I can't find this option for NFC anywhere. Help, please.

  -Nathalie

  Aakash_04 wrote:

  Recently, I upgraded my Sony Viao F15218SNB of windows 8 for windows 8.1. Now I have problems with the options of the NFC. Before, I had the opportunity to become the NFC adapter power on and off (like the ability to enable and disable the wifi and bluetooth) but now after the upgrade to windows 8.1 I can't find this option for NFC anywhere. Help, please.

  -Nathalie

  It's under settings/network/airplane mode Charm Bar/settings/PC

• My 2010 and 2011 & H R Block tax program versions do not work because I've upgraded to windows 7 for win 8

  I have used H & R Block for more than 2 years but now I updated to windows 8, the program did not run more.  can someone help me?

  Try to reinstall using compatibility mode:

  How to run older programs on Windows 8 - for Dummies

• How can I fix my SD card reader after upgrade to Windows 7 for HP Pavilion dv8000?

  I upgraded my HP Pavilion dv8000 with Windows 7, but my SD card reader does not work now. Advice?

  Hello:

  I think that your problem will be solved by this updated driver. It is not on your laptop support page.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1847703&prodNameId=1847704&swEnvOID=2103&swLang=8&mode=2&taskId=135&swItem=ob-70996-1

  Paul

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• Random Blue Screen Of Death after upgrade to Windows 7 Ultimate 64 bit

  I was running Windows 7 Ultimate 32 bit for many years without any serious problem. After the upgrade to Windows 7 ultimate 64-bit I was prey to a BSOD random. Sometimes I can get several BSOD in one day. Sometimes I could get any same-day heavy after multitasking.  The BSOD may occur during any task or when I try to quit. I have the latest drivers and BIOS. I disconnected all my equipment and refurbished it. I used the diagnostic tools to test my memory 4G and my Seagate 1 t SSHD hybrid and they passed. I changed the sata connection cable my HD to the MB. I did a Windows repair (scannow) and also done a repair install and it did not help. Although these questions is past the BSOD after upgrade to Win 7 64 bit, that I suspect may not be associated with Win 64 bit but could be hardware related. Any help to solve this issue will be appreciated.

  Kind regards

  Chris

  All 5 associated with your ATI video driver.

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• No CD/DVD drive after upgrade of Windows 8 on Satellite Pro S300L

  The cd Rom drive no longer works after upgrade to Windows 8.
  The drive is not displayed in the Solution Explorer, either. It is mentioned: error in the register.

  I can not change the right driver in Device Manager - probably it was deleted.
  Is the driver of the * MATHSITA DVD-RAM UJ880AS drive * for Windows 8 available?

  How can I make my cd Rom drive working again?
  How can I fix the error?

  Could guide you me in registry change (upper and lower filters) if necessary?

  Post edited by: GRIX

  Hello

  Check please follow thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68988

  Here, you can find the solution to your problem.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.