Similar Questions

• The attention! Error initializing PCI express slot 4 (for a PCIe used in the PXI-1033 chassis)

  Hello

  I have problems with my PXI system. When I try to contact the 1033 chassis using his high card my computer does not recognize (the PC displays the message during the start-up stage: "alert!) Error Initializing PCI express Slot 4). It was working fine before, but the chassis has been disconected with the PC on. I read that it may cause failures of communication, but I have not found a good source for this problem. Could someone help me with this problem?

  Thank you very much!

  Victor

  Hi Victor,

  Can you check something for me? One, can you try to disconnect the cable between the PXI and PCIe cards and try to restart your machine. When you do this, you still see the message? I know that you mentioned in your first point that the chassis is turned on when you see the error message, so I'm just trying to clarify what you mean by that.

  Also, it is quite easy to plug in a cable express MXI upside down, so even if point 2 you said that the links appear to be good I had to check to make sure that the cable is properly connected. You have additional cables, you can test?

• HP dv6-3150us has a PCI express slot?

  HP Pavilion Dv6-3150 we

  http://support.HP.com/us-en/document/c02497785

  I want to add an external graphics card and it is possible olnly via PCI Express slot or a slot express card, and this model does not have an express card slot.

  I also discovered the mantanence and service guidehttp://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us & lc = in & product = 4308465 this type of models support bluetooth module, since my laptop doesn't have a bluetooth, is it possible that the PCI Express slot for the bluetooth module is empty.

  And I would like to know if it is possible for me to add an external graphics card or I need to change the graphc card that comes with this laptop?

  There is no way to change or supplement the graphics system. I've seen the videos floating around devices of Frankenstein connected to the card slot wireless with the back cover open and then a powered external Bay with a standard desktop video card. Trying to put something like that will almost surely fry the motherboard, or at best will not perform very well. The mini pci-e slot for the wireless card is a 1 x pci-e bandwidth and video cards require 8 x bandwidth. So if you want to access a pci-e slot, you will need to remove the wireless card. Bluetooth on this model is made by a card in combination with the wireless.

  Your laptop doesn't have an expresscard slot, as you acknowledge. They are available only on business models high end of our days, and the same limitations apply to have an external videocard connected through an expresscard slot.

  You can change the motherboard of your laptop. You have a version with the Intel HD graphics only, and I'm sure that other versions of the series dv6-3000 used best graphics systems. You seek to a significant investment in time and money for it. Post back, however, if you want to just give it a shot and we can track down numbers of specific parts and manuals of instructions or videos for you.

• Pavilion p6340f: version PCI Express Slot p6340f

  Hi all!  I'm upgrading graphic on the hp p6340f computer and need to know the version of the PCI-Express slot for the card that I get functions correctly.  Thanks for any help you can give me.

  By checking several motherboards using the Intel G43 Express chipset (same as the one in question), they are all are rated 16 PCI-E 2.0.  The standard 3.0 is more recent than the date of reference of the manufacturer of your PC.  Some PCI-E 3.0 might be OK in this motherboard but make sure that they are backward compatible.

• Ports Firewire and PCI Express slot not already busy

  Hello

  I have a Panasonic Mini DV camcorder that has a firewire port (it also has an A / V jack on the front).

  I recently bought a p6623w

  http://support.HP.com/us-en/document/c02479685

  http://support.HP.com/us-en/document/c02560084

  Because this computer includes ports, Firewire and PCI Express slot has been recently filled by a video card, what are my options if I can connect the camcorder to my computer? I have to go the A / V jack route?

  Thank you.

  Do you still have one of the three slots PCI Expressx1 open?

  http://www.Newegg.com/product/product.aspx?item=N82E16815124092&cm_re=firewire_card-_-15-124-092-_-product

  http://www.newegg.com/Product/ImageGallery.aspx?CurImage=15-124-092-TS&SpinSet=15-124-092-RS&ISList=15-124-092-Z01%2c15-124-092-Z02%2c15-124-092-Z03%2c15-124-092-Z04%2c15-124-092-Z05&S7ImageFlag=1&Item=N82E16815124092&Depa=0&WaterMark=1&Description=SYBA%20Add-On%20Card%20Model%20SY-PEX30014

• Question of PCI express slot!

  I have a HP Pavilion P7-1203 with the motherboard IPISB-CU (Carmel2) and everything he says, it is a PCI express x 16 slot, can this motherboard suppost a PCIe 3.0 graphics card?

  Thanks I've read on tomshardware maps 3.0 graphics are compatible 2.0 but you won't get the full potential unless you have a processor of Ivy bridge

• Slot PCI Express HP p7-1203 question!

  I just bought a HP p7-1203 today and I want to update the th graphics card and the specs say that it is a PCI Express x 16 (gen2.0) slot that means it's just a regular PCI Express slot or a PCI Express 2.0 slot? Probably a stupid question.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02980014

  This means that it is a second generation x 16 PCI-Express slot... so Gen2.0 it conforms to the PCI-E 2.0 standard.

  Frank

• OptiPlex 3010 - PCI-e slots to prevent sleep?

  I have an Optiplex with Win7 pro OS 3010.

  I have a (RC-305th) Rosewill 4 port RS232 Serial Card occupy one of the card PCI-Express slots on the motherboard.  The serial ports work fine except when the system is idle.

  Everything works, application, leaving the serial device connected to the card.  When I come back a few hours later, as long as the next day, the application using the serial RS232 port has stopped working.  He reads is no longer the serial device.  Swtpping the application, then by restarting has sometimes everything works again.  Other times I have to restart the PC.

  I went the power settings and have done everything to NOT go to sleep.  It is my understanding that the PCI-Express request mode specification 'sleep' when idle.  What I want to do is to disable this option completely.

  All ideas and thanks for the help.

  -GS-

  I knew a lot of trouble when the maps in the series contain the MOSCHIP on DELL OptiPlex 3020 chipset.   I think you'll find that Rosewill RC-305th contains this chipset.  I bought two cards series both with the same CHIPSET (STARTECH VANTECH), the two MOSCHIP chipset.  Serial devices had been set up for weight scale Truck Stop (9406 Fairbanks series) in a Serial Communication continuous with continuous data flow.

  Requirements for my Serial Communication:
  Scale software installed on DELL OPTIPLEX passively listen to the COMM PORT communication as long as the COMM Port is opened by the software.  The scale of Fairbanks send data via an interface series in a constant loop.  What I find is the MOS chipset is idling somehow over time.   If I close and open the PORT Serial Communication will continue to listen passively to the stream.
  

  I had the following problem with the map:

  -Card series would have slowed after a period of TIME (5-15 minutes).   Initially the problem was related to PCIe power saving features, but I'm sure that issues are assigned to the MOSCHIP so.  In general, I have to CLOSE and REOPEN the port for the serial card process the incoming data stream

  -After a period of time (a few days) the map would pass the bone, (not available in the device Mgr).  Attempts to remove the CHUCK, restart, reinstall the driver did not find the MOSCHIP series card.   To get the card works to new necessary physically reinstalling the card in a different SLOT PCIe for the operating system to recognize the serial card

  Requirements for successful communication:

  -Turn off all Power Saving settings in BIOS
  -Disable all CommPorts onboard in the BIOS
  -Disable all Options Windows power functions, specifically:
  -State of the PCIe Power Management links - OFF
  -Selective suspension USB setting - DISABLE "this should not be necessary w / PCIe.

  CORRECTIVE ACTIONS:  Buy a card series PLX/OXFORD OXPCIe952 chipset.  For my DELL 3020, 7020, 9020 Optiplex machines) I have been using the STARTECH PEX1S1P952 (containing the PLX/Oxford - OXPCIe952 chipset) like this work for my needs.

  My hope are some my find this useful.

• Lenovo Mini PCI-E Slot P500 locations?

  Hello

  Happy holidays ~! Hope everyone is having a great time.

  I need help to determine if the Z500/P500 manual material actually told the truth or not.
  According to page 27 of the manual of the equipment to the Z500/P500 Ideapad, there are 2 Mini PCI-Express slots:

  "PCI Express Mini Card Slot: Slot 2.
  

  That means actually? To me, it sounds like there are 2 mini PCI-Express slots somewhere on the motherboard, but when I opened it upward, I only found one, and it was taken over by the Wi - Fi card. I looked under the slot where the Wi - Fi card has been, but I couldn't find another location.

  Can someone tell me where is the second Mini PCI-Express slot? I looked carefully through the motherboard, but I couldn't find the other - I hope it was just because I haven't looked hard enough.

  Assistance specialists have an answer?

  Thank you very much for your time and once again, happy holidays!

  -Zoey

  Hi Zoey

  It is confirmed that the computer that you have only 1 location but this machine could be found also with two slots as the Z500

  Thank you

• Weird PCI Express Mini problem.

  Hello everyone. I just noticed a very weird problem in W520 (4270CTO). I added a device on the PCI express slot I have attached HAND and thread in the correct position in the device (RED wire sleeved by HAND) and wire sleeved BLUE to the power supply, the problem is that nothing happens. It's like the PCI is dead or the son do any work. Nothing happens when the laptop boots to Windows 7 (as new hardware found notification), the device seems ok. I tested it in another laptop and it works. Do you know why this phenomenon occurs?

  P.S.: THE DEVICE is connected to the PCI Express port that is higher next to the HARD disk. No one who is at the bottom of the laptop.

  Hi all

  I found the solution from another forum. A member told me that the laptop is disabling silently hardware incompatible when it isinstalled on the upper PCI - slot.My only concern now, is if there are drivers for the network card, becaue I can't find. I think that even if they are made to other types of machines that they work with my W520.i do not know if you agree well.

• PCI-Express?

  I looked on several review sites on my IBM Thinkcentre M52 9210 (the compact one, NOT the tour) and he says he has ONE PCI-EXPRESS X 16 expansion slot. I printed a picture of the PCI-E x 16 slot and compared it with that of my mahcine. It says it also has a PCI slot and I can see it, and below must be PCI - E, the black one.

  But when I look closely it doesn't even look close to the image I had printed a. It is around 90 mm (more or less a few mm) and instead of having two separate ' gaps "(comme on pourrait identifier leur PCI-E x16), my had 5"deviations"in them.". " I plan to upgrade my computer and install a dedicated video card to replace my old Intel GMA 950 integrated chipset and I really need to know if it is PCI-E or another type of slot machine.

  Thank you.

  Take a look at this image:

  http://i.Dell.com/images/global/learnmore/pcie_connector.jpg

  You can tell from this image, the x 16 PCI-E has two what is called the 'gaps', a smaller on the right, a bigger to the left. What intrigues me is that the mine has five gaps, instead of two. I looked up my machine on the lenovo site, and it does not say it has a PCI-E slot, but just, he doesn't look like a PCI-E x 16. I really need someone to confirm this because if it is not PCI-E x 16 I have to get a PCI graphics card...

  Poweraml,

  According to our product specifications, the ThinkCentre M52 9210 machine type has 2 expansion on a PCI riser slots:

  • Slot 1 is a half-length, x 1 PCI Express slot intended to be used with our connection card PCI-E DVI - D (part number 73 P 2516). To do this, not supported x 16 PCI Express adapters.
  • Slot 2 is a half-length, version 2.2, the PCI slot.

  These specifications are available at:

  http://www.Lenovo.com/support/site.WSS/document.do?lndocid=MIGR-60416#exp

  I hope this helps.

• Dimension E520 PCI Express x 16

  Hello

  I try to install a network card Ethernet HPE 1 GB 4 ports 331T, PCI Express x 4 in the PCI Express x 16 slot of my Dell Dimension E520.

  According to the documentation for the network card, it should be compatible with a 16 slot x ("four-lane (x 4) PCI Express compatible with x 4, x 8, and x 16 PCI Express slots").

  There is an error when the computer is on: LED 1 and 3 are lighten, which means that there is a problem with the RAM installed. However, the computer works well when the PCI network card is removed.

  Latest available BIOS is installed. Also tried to disable the NIC card, without success.

  This PCI card is really compatible?

  Thanks for your help.

  Where is installed your plug-in software component video card or do you use onboard video?

  It seems that you have only one PCI-e x 16 slot in this model and it is probably reserved for a video card. BIOS can research (and not finding) RAM that normally would be on a video card.

  The only other PCI-e slot is x 1 so that network card probably won't in this niche.

• 23 - d130ea pci express connector envy

  Recently purchased a dvb - s2 (pci express) card, can't find the connector motherboard relevant.

  Any help much appreciated

  HP ENVY 23 - d130ea TouchSmart all-in-One desktop PC is a computer 'All-in-one' who doesn't have any full size PCI Express slots in it.  The PCI Express slots only this computer, are strictly internal PCI Express mini card Sockets and a PCI Express MXM slot for special MXM graphics card.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• PCI Express x 16 does not?

  I have a HP Pavilion a1730 (Vista OS) and a few weeks ago, the screen went black (no received no signal) after turning on the PC. I tried / cable with my laptop screen and they work fine. the screen also works with the integrated graphics card and VGA on the back of the PC. I replaced the graphics card I had installed twice there are three-four years in the PCI Express slot and in both cases, the problem persisted. The manufacturer technical support card grapics said that most likely the slot PCI Express has gone wrong. Indeed, when I removed the 3-4 years-old graphics card, I had to pull hard because he had "stuck" in the slot. However there is no visible damage. Material detector does not see the replacement of the graphics card, the driver seems to be properly installed. The replacement of the card properly set match for Watt and amperage.

  Should I bring the PC to a service center and if so, where in Essex county NJ? I couldn't find a list of service centers in the HP website.

  Since the post it seems that the onboard graphics is still working OK.  It could be that the PCI slot has failed if a replacement of the graphics card does not resolve the problem.  In this case, I would do it from the options.  If she is taken to a repair facility, the cost of repairs would easily exceed the value of a computer this old (over 5 years).  Just my opinion, but use it with onboard graphics until more fails.

• Installation of a card PCI-Express for e-SATA Support Ports?

  Hello Experts,

  I would buy a card PCI-Express to Support 2 x e-SATA Port. The card can only installed in a PCI-Express Slot Interface. Windows Vista Ultimate German, 32-bit Version with SP1, real drivers and patches on my XPS PC.

  I'm not sure, that the card can be installed on my XPS 720 desktop computer.

  Currently work driving my Seagate FreeAgent Pro on the IEE1394 (e.g. Firewire) Port, but the speed is currently very poor.

  Sorry for my bad English, I live in Germany... ;)

  For more Questions for me - thanks to all the experts here...