Pavilion dv7 - no wireless or bluetooth after power surge?

Similar Questions

• Pavilion DV7-1451nr: Wireless button stays amber

  My pavilion dv7-1451nr turns wireless keyboard blue when I have to reset the motherboard by removing the battery and press the power button / stop seconds, after which I plug in charger to him while leaving the battery and press the power button / stop. After that, I would like to press f10 to enter the bios setup, then I would like to load the defaults, save and exit.
  
  After doing all that I have explained above, the wireless button becomes blue and wireless assistant would be activated and indicates that the wireless is turned on. If I check in the Device Manager, I see the hardware details and driver wireless populated it and everything should work fine, but once I restart the computer, the wireless button would refuse to start. There is orange. If I try to check the State of the material status and driver WLAN on Device Manager, they would be is more filled it more and wireless assistant will refuse to start. If by chance he started, this would indicate that the wireless is turned off by the Device Manager.
  
  I had tried uninstalling the wireless LAN driver and reinstalled just in case the problem came from the software side but not solution. Just this afternoon, I have decoupled from the computer and removed the card WLAN, dusted it and replace it back, but the problem persists.
  
  The type of wireless network card is Atheros AR5007 802.11 b/g WiFi adapter. I noticed something this afternoon, however, after having checked the service manual for the computer, I realized that there is specific types of the wireless card compatible for specific regions. For example, the number of appropriate wlan spare parts which must be on my computer is 582564-002 and have this with references with the number of spare part of wlan on the wireless card available on my computer that begins with sps 452..., I realized something was wrong. I'll leave that to stop you guys from HP, but I really need a solution to this problem very fast because it's really annoying me. Thank you.

  Hello @LL_Cool_J,

  Thanks for the information!

  I don't know what you mean, when he asked if the model is 50xx or 40xx. Confirming the WLAN Module is a little difficult, because there are several manuals maintenance for this model.  I was able to refine the selection a bit, by comparing the numbers of spare part for hard drives.  Based on this REPAIR, the WLAN Modules you have listed, 582564-002, 593836-001, must be compatible.  However, I don't see the Atheros as option in this manual.  To be on the safe side, you can contact our telephone support HP.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion dv7-1000ea Wireless problems - Urgent

  I just do a fresh install of Vista 32 bit on this laptop Pavilion dv7-1000ea.

  I have trouble getting the wireless operation.

  Device Manager is not recognizing that there is a wireless inside the laptop adapter, even if there is.

  The wireless light is orange. I could not do it turn blue.

  I installed ALL necessary drivers - nothing is reported in Device Manager does not.

  I have updated the BIOS and also tried it revert to an older version to see if that makes a difference or not.

  I assured that wifi antennas are properly fixed inside the computer.

  I tried to ensure without wire is activated in the Setup (F10), but there is no option for it!

  I tried to use HP Wireless Assistant to turn it on, but it won't let me open the utility.

  I tried enabling wireless through the Windows Mobility Center Control Panel, but there is no settings for wireless in there.

  Can anyone help?

  Sorry everyone, I managed to fix it. I took out the wireless card and put it again and then it was recognized and began to work.

• HP Pavilion dv7-6135dx: windows 7 resettled after upgrading Windows 10

  Hello

  I bought my computer in 2011 at Bestbuy. In this computer factory settings had various applications, HP, HP Recovery manager, etc.

  Recently, last week my computer was attacked by malware and therefore, I had to restore my computer by using the recovery HP (Rebecca.exe) Manager. Meanwhile, windows offered to updgrade to 10 Windows. My computer is compatible, and that's why I decided to upgrade. Unfortunately, Windows 10 did not work too well with my computer, and so I contacted Windows Support team. They have reinstalled Windows 10 in my machine and remove the function back to Windows 7.

  Support of Windows 10 team could not solve the problems in my computer. I then asked to downgrade to windows 7. With their downgrading to Windows 7, I had to get all the drivers to make my computer function again. However, I do not have original HP and Applications settings my computer had when I first bought the computer.

  Is it possible to install all the parameters of HP and Apps? I tried to install HP Recovery Manager, however, when I do, it says "Softpaq does not apply to the system, no installed HP Manager."

  Help, please! My computer is running slowly. What should I do?

  ramirez_adolfo

  The best way to make your PC work again in Win7 is to do a factory restore using the HP recovery media.

  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.

  It's the HP for your PC product page: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv7-6100-Entertainment-Notebook-PC-series/5082216/model/5118973

  Down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP Pavilion dv7-6110sl wireless adapter

  I would change my adapter with one who knows dual band (2.4 and 5 GHz) wireless and bluetooth.

  I was looking for this one: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6230.html

  Can you tell if it will fit in my notebook or not?

  And it's all good, or would you recommend other adapter?

  Carpe Diem!

  Hello

  HP supports this list, otherwise, you have to go yourself (as pilot, antenna.. .but I think should be very straightforward, I traded a lot, not machine, even not even card than yours):

  • Atheros AR9280 adapter WiFi 802.11a/b/g/n 2 x 2
  • Atheros 9285 G 1 x 1 adapter WiFi 802.11b/g/n
  • Broadcom 4313 1 x 1 WiFi 802.11b/g/n and Bluetooth 2.1 + EDR adapter (BT3.0 + HS ready) 2070
  • 4322 Broadcom 802.11a/b/g/n WLAN module
  • Broadcom BCM94313 WLAN 802.11b/g/n module
  • Realink RT3090BC4 1 x 1 WiFi and Bluetooth 2.1 + EDR adapter 802.11b/g/n

  Kind regards

• computer does not start after power surge get to message x 300 128 MB BIOS

  I had a power surge of the House with the computer when I restarted I got a black screen with a 300 x is 128 MB bios p/n 113-a33406-100

  under that top left, a blinking cursor try don't reboot with pf8 no help

  Hello

  ·         What is the brand and model of the computer?

  ·         What is the last splash screen that is displayed, until you get the error message?

  ·         Were there recent changes made on the computer before the show?

  Please give us more information on this. Also, disconnect any external devices (printers, USB Hub, drives external, etc.) and try to start.

  Error-PC x 300 and 128 MB BIOS p/n 113-A33406-100 is linked to the Dell computer. If so, I suggest you to contact the Support Dell about this issue and check. You may experience this problem if the BIOS is damaged.

• PC in a cycle of restarting after power surge

  Win XP SP 2
  NVIDIA 8800 GTS
  2 gig Ram
  P5N32 SLI
  Hi guys,.
  I hope someone can throw me a BONE here, because I don't know which way to go with this.
  Basically, power surge last night, my PC will now in a cycle of infinite when turned on reboot.
  I can't start in safe mode, as it hangs on the list of files. Cannot start last well-known, cannot start from the CD, at the risk of going as far as "Checking hardware" and restart.
  So, essentially I can't anything. I guess it's obvious that some hardware is fried, but I can't afford to replace things to chance - any suggestions on probable causes, or ways I can limit?
  Thank you
  KeV

  Hi KevTM,

  Method 1:

  I suggest to disable automatic system error reboot and check the error message.

  Prevents Windows from automatically restarting if an error of Windows to fail. Choose that this option only if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

  To do this, follow the steps below.

  To start Windows in safe mode, follow these steps:

  a. click on the electric start button
  b. to enter the Windows xp advanced startup option.
  c. when the computer starts up press and hold your "F8 key" who should bring up the "Menu Options advances of Windows". "»
  d. use your arrow to switch to "disable automatic system failure reboot" and press your enter key.

  Here, you will need to check the error message or you receive an error code.
  
  Method 2:

  Try to disconnect all the external devices connected to the computer except the mouse and keyboard and try to start the computer and check.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• HP Pavilion dv7 7077ez wireless for windows 8 does not work after upgrade to windows 7 64 bit

  I have the broadcom card. I have try all the drivers and I still cant install drivers I see on household also setup.rul 342 of the installation error wireless start won't start. What should do?

  Hi Emilinator,

  More than likely HP won't to material support for Windows 8 on any system purchased before October 1, 2011.  Most of the Windows 7 drivers work in Windows 8.

  You can try this pagewhich provides measures to solve the problems of connection to broadband for Windows 8.

  Check out this page to see if your computer has been tested by HP with Windows 8.

  You can run the Upgrade Wizard, which will scan your PC and report on what is currently installed on your PC is compatible with Windows 8.  This guide was updated for Windows 8 provides lots of information which is needed for all those planning the upgrade.

  Good luck

• Pavilion dv7-3165dx: restoration of BONE after the replacement of the motherboard

  I'll have to replace a defective motherboardin a Pavilion laptop dv7. The HARD drive seems intact and still has the restore partition. I'll still be able to re - install the operating system of the existing or should I reinstall from disc and if so still use my existing COA? Laptop is a WA794UA #ABA

  Thanks for any help I can get.

  @Donthemon,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that you want to reinstall the operating system after replacing the motherboard. I'm happy to help you in this case.

  You can restore the OS from the HARD drive.

  HP computers - performing a recovery of system HP (Windows 7)

  You can also create your own recovery disk

  HP computers - create and use a System Image to restore your computer (Windows 7)

  Don't forget to back up your files before recovery.

  Let me know if you need more assistance.

  Kind regards

• Pavilion DV5-1118es wireless and Bluetooth issues!

  I have a Pavilion DV5-1118es am not able set and activate wireless & Bluetooth, can someone help me to do these things?

  @smhsn

  Hello

  Your model is without bluetooth.

  You can check the specs here.

• Pavilion DV7-6175us: wire frayed at the power cord

  

  I just discovered this thread in my power cord cut tonight. Spare part number is 609940-001. As you can see, the white wire is broken, but the only issues I have experienced with my laptop is my AMD display driver to crash. But after you have reinstalled it and Direct X, as well as some versions of Microsoft Visual C++, the stability of video cards has improved considerably. But tonight, he crashed twice in 5 minutes, and then a few seconds later, just let Windows down and showed me a message of BSE on my display driver. I then looked at my power cord, and I find the severed cord. The severity of a problem is the next, and how long should I try and get a replacement cord? Thanks for reading and thanks in advance for your answers.

  Stop using it. It is a fire hazard and a danger to your laptop. Get a new one immediately.

• Pavilion dv7: enter the Administration password or power on password

  Hallo...
  My computer is blocked and on my screen, I get the Message "password entered Administration or power password"... After a few attempts, I get the message 'system turn off' and the Code 67724899...
  Can someone help me please...?

  @Manousissoti

  Enter: 78682219

  Kind regards

  DP - K

• Pavilion dv7: enter the password administrator or power on password

  Hi all

  After a total given I have to enter password administrator or power on password, but I haven´t it.

  After three missing passwords I turn off the system and the key: 55001602.

  Can someone help me?

  Thank you

  @Th99

  Enter 40969224

  Kind regards

  DP - K

• Pavilion dv7-6102ea: Wireless for dv7-6102ea driver does not

  Hello

  My wireless network device does not work.

  I downloaded the recommended drivers for my laptop model, but they do not work.

  I have a dv7-6102ea,

  and my network hardware id is:

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C

  PCI\VEN_14E4 & DEV_4727 & CC_028000

  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Please help me!

  Hello:

  You need the driver for this device...

  FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

• HP pavilion dv7-6111eo: various missing drivers after having reinstalled Win7 64 bit on hp pavilion dv7-6111eo

  Aloha

  First of all... I'm not grumpy, geek or nerd... And I want to say these words to those who are at best.

  In this case, you need to see me as a kid in kindergarten, being taken by the hand and what to do, down on every detail. Sad but true.

  Without me know why, I've known several DLL files missing, and often obtained on those error messages.

  A pain in the neck, so I re-installed Windows 7 64 bit, because I didn't want to mess with these missing dll.

  After this relocation, I couldn't have the internet connection to my router. Fortunately, I have a fixed 10 year and longer, where I eventually found the driver I needed, so it works now.

  But now it seems that there are several other drivers missing or not installed.

  I got a little info, another post, it must provide information and hope that will be enough. If this isn't the case, then please let me know additional information which may be required, and where I can find those on my PC, so I can provide these.

  Missing drivers:

  Network controller;

  Hardware ID: PCI VEN_8086 & DEV_008B & SUBSYS_53158086 & REV_34

  SM Bus controller.

  Hardware ID: PCI VEN_8086 & DEV_1C22 & SUBSYS_1659103C & REV_05

  (USB) Universal Serial Bus controller.

  Hardware ID: PCI\VEN_1033 & DEV_0194 & SUBSYS_1659103C & REV_04

  I have 4 USB ports, but only work, others do not react, and I need all four at the same time. In addition, I would like to have everything in order after I had to reinstall Win 7.

  Thank you in advance for any help I can get. Just have in mind that I need the things dug into the paper.

  Hello:

  You need these drivers...

  SM Bus controller.  Install this first and then restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  Network controller;

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  (USB) Universal Serial Bus controller.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  You will also need this bluetooth driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=