Pavilion Dv76b01tx A3E26PA #ABG: HP simplepass does not

Similar Questions

• SimplePass does not work for Web sites after the receovery system

  I recently did a recovery plant system overall condition,

  SimplePass works for the windows logon, but not for Web sites more... no invites her to save new sites when passwords are entered finger print OR interrogate the user on sites that are entered manually.

  I also tried importing my saved identity still no website

  SimplePass 2012 version: 5.3.1.7

  Laptop model: DV6 - A6Y01UA

  CW,

  You did not include the version of your operating system: Windows 7 I guess because you have been deported back to a very early version of the HP SimplePass.

  You must consider that you may have a version of your fingerprint driver that is appropriate (fairly recent) to run a newer version of HP SimplePass.  The fact that the old version SimplePass does not at all suggests that you run the version of the driver 4.3.118.0 - this version of the driver is not compatible with subsequent revisions of the SimplePass software.

  Reference

  HP Pavilion dv6-6c15nr Entertainment Notebook

  • Fingerprint drivers

  If your version of the driver (for your OS) is equal to or newer than those listed here, chances are that you can keep your current licence.

  If your current driver is older than the driver for your operating system,

  then: download and install yet the driver of fingerprints for your operating system.

  sp58834 validity sensor V 4.4.232.0 Win8

  validity sensor V 4.3.205.0 Win7 sp55109

  [Devices]

  USB\VID_138A & PID_0018 = "validity sensors (WBF) (PID = 0018)" "

  ------------------------------------------------------------------------------------------------------------

  • Find, open, and follow the procedure described in the file named:

    Simple Instructions for upgrade HP SimplePass

  • Think about it: If you try to update to the recently released Omni SimplePass program, you will NOT be able to use your webcard .tsd file to import your webcards (websites and passwords) in the new version of SimplePass.  The Omni of SimplePass version is NOT compatible with previous versions of the HP SimplePass program.

  ==========================================================================================

  Finally, you might take a look at the Web page of your computer (under the reference above)-check to other drivers or software that you can update.

• HP SimplePass does not work on Hotmail/Outlook, but work on other sites? (webcard broken?)

  Hello world

  I use a HP Pavilion dv6 notebook pc with Windows 7 Edition Home Premium and I have currently the 5.4.0.402 HP SimplePass version installed.

  I use SimplePass since I bought this laptop and it has always worked well for me. Now suddenly it seems SimplePass does not recognize Hotmail/Outlook as a login page (than that makes sense?)

  Whenever I visit outlook.com now simplepass do not ask me to slide my finger. Whenever I connect to a new simplepass (non-registered) e-mail address don't ask me whether I want to save. It still works on other sites as well (for example, facebook and this forum)

  I looked around the forums and found this post to be the most promising:

  Promising position

  However, I have tried all the suggestions in this post, and it still doesn't seem to work.

  SimplePass Web page offers little assistance, saying that I need to upgrade to the version of windows 8 first and see if that helps. (but I have fear of the version of win8 will have even more problems because I use win7..?)

  The strangest thing is that it used to work. I don't know what I could have done it spoil. The only thing I can think is that I might have deleted some of my history/cookies? I don't know if this would affect SimplePass, but then why would it still work on facebook and other sites... ?

  In any case, I really hope there is a solution to this problem. Any help is very appreciated!

  Hi again,

  Thank you for trying to help, I really appreciate it!

  I thought he could change from hotmail/outlook and so I've tried to make the webcard with www.oulook.com , and www.hotmail.com and even the https://login.live.com/login.srf?ettc... the site where you end up when you go to two sites... Does not work either...

  However! As of today, it started working again! I think it has something to do with one of the updates from HP that has recently settled on my computer. (the simplepass bar is black instead of yellow, every time he suggests sliding me my finger)

  With the update my hotmail webcards seem to work perfectly again, then BRAVO!

  Thanks again for the help!

• HP simplepass does not work on my windows 7 Home premium.

  Original title: hp simplepass does not work properly. my os is windows 7 home premium. it did not work properly., but the program does not start

   

  I use a hp laptop pavilion dv6 series. the hp simplepass 2011 program was working properly. but now since a few days it doesn't. also, the extension simplepass crashes at run time. the program is also not opening. What should I do?

  My os is windows 7 Home premium.
  Hello
   
   
  1 did you changes to the computer before the show?
  2. what happens when you try to open the program?
  
   
  Try to open the boot program and see if that helps.
  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Note:
  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
  If the article above is not enough, you can contact Hp for assistance.
  http://h30434.www3.HP.com/

• HP Simplepass does not work in Google Chrome after chromes released 29.0.1547.66 on seven 2

  PRODUCT DETAILS

   

  Product name: HP Pavilion dv6 Notebook PC

  Product number: LM720AV

  Operating system: Windows 7 Home Premium 64-bit Service Pack 1

  Version of Google Chrome: 29.0.1547.66

  HP Simplepass version: 6.0.100.252

  DESCRIPTION OF THE PROBLEM

  HP Simplepass does not work in Google Chrome after that chrome stable release 29.0.1547.66 September 2

  Hello

  I use HP Simplepass in google chrome for the last two years. HP Simplepass and chrome is a good combo and the very useful software which helped me a lot. Everything was going well until the chrome to date has been updated with its latest stable version 29.0.1547.66. Now hpsimple pass does not work. I tried to re install chrome and hpsimple pass, even I tried the factory reset but nothing has worked. Hpsimplepass works with Internet explorer, but not with chrome.  I simply want to hand broken without hpsimplepass in chrome. someone please help me solve this problem.

  -Josiah

  Hello

  different versions of Chrome require a different version of the SimplePass. You can see the version for two in programs and features. It is very important and useful for checking, because if it is possible, you will want to avoid t

  o of course it was a big Chrome update that caused it. AuthenTec (3rd part - is no not part of HP) will have to make changes that work around all that has changed with the new version of Chrome. It's already happened and it will happen periodically, with any extension. As Chrome updates, extension developers make changes to follow.

  I'm here to help as much as I can. Obviously, I can't re - write software SimplePass Authentec so my help will be limited. Support to AuthenTec site gives these instructions for how expansion (logon Web) does not work correctly.

  Basically,.
  1. update both - you all have updated to Chrome. If you have an older version of SimplePass, the latest version of SimplePass is 6.0.100.272.

  2. make sure that the logon Web extension is enabled. I think that everyone has done it, but check just in case the update of Chrome can be disabled.

  3. the screenshot of Authentec support siteChromeIssue.jpg

  else there (re-create the user database).

  Then of course, there was a big Chrome update that caused it. AuthenTec (3rd part - is no not part of HP) will have to make changes that work around all that has changed with the new version of Chrome. It's already happened and it will happen periodically, with any extension. As Chrome updates, extension developers make changes to follow.

  I'm here to help as much as I can. Obviously, I can't re - write software SimplePass Authentec so my help will be limited. AuthenTec gives these instructions support site for how expansion (logon Web) does not work correctly.

  Basically,.

  1. update both - you all have updated to Chrome. If you have an older version of SimplePass, latest version of SimplePass is 6.0.100.272.

  2. make sure that the logon Web extension is enabled. I think that everyone has done it, but check just in case the update of Chrome can be disabled.

  3. screenshot the site of Support of Authentec

• HP pavilion g6-1016ex the computer screen does not.

  HP pavilion g6-1016ex the computer screen does not. but when I connect to the pc display by display moniter on-site port, pc display moniter works. How can recover from this problem... ?

  Have you tried pressing F4 or Fn + F4 to switch between the views?

  If it still does not work, the following document can help you identify the problem: display problems.

• Pavilion dv6-3080si: HP Simplepass does not display a logon to the internet connection screen

  I use the Pavilion dv6-3080si. After a clean install of WIN 10 pro I installed HP fingerprint reader and the HP Digital Persona of HP simplerpass driver & software for my portable computer product number (HP identified automatically the product). There is no problem to connect my laptop. However, when I try to configure the password for Web sites, such as for example my Bank, it does not work. There is a small icon that appears to scan fingerprints, and he said "It is not a logon screen" though I am to the logon screen.

  Some recommendations published by members of Forums Support HP, I installed the version of HP 4.5.228.0 and worm 6.0.10.276 Simplepass fingerprint reader and even once, I found myself with the same problem. No idea why it doesn't work? Is there a problem with Win 10 and IE 11?

  Thanks for you help. However, I installed Authentec simplepas worm. 8.01.11 sp 66143 and fimgerprint player ver 4.5.228.0 MS 66110. Everything works perfectly now.

• HP probook 450 g2: hp simplepass does not

  I bought a brand new hp probook 450 g2 pc laptop last week.and than th pass simple version 6 nuts also, I installed his does not not the sensor I does not please hep to solve this problem

  @darshmorgan

  darshmorgan wrote:
  

  so why insert it a finger print sensor to these business notebooks.is there any option to enable that works because this note book only for personal use

  In response to your questions:

  • Laptops of professional quality are equipped with sensors of finger prints for the same reason that consumers rank models offer the feature - biometrics are a method very popular to connect to your computer without having to type a password.

  SimplePass software runs on quality consumer laptops.

  • Security of client software runs on the professional quality laptops.

  Both programs offer some of the same functions.

  

  Options

  Install and run the Client Security

  OR

  If you run Windows 10

  and

  If you only want / need to connect to the computer with your fingerprint

  then

  You can set a PIN code and then activate the fingerprint reader to log that ships with the operating system Windows 10

  Start / Windows key > settings > accounts > Sign-In Options > PIN

  Help:

  Add or remove fingerprints - 10 Windows logon

  OR

  If you do not want to install / use the Client Security software on your computer

  and

  you do not want to be able to connect to (most) sites without having to type a password,

  then

  You can buy a password management program

  If you want, you can combine security software and password into a single service manager.

  Example: Avast Prime Minister

  DISCLAIMER: I do not work for Avast nor do I have any personal affiliation or business with the company - I have used their products.

  

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP Pavilion m6 1090 - is: Beats Audio does not work (HP Pavilion m6 1090 - is)

  I misplaced the driver CD that came with my laptop, but I did not know until I had to do a fresh install of the operating system.
  I went for him still hoping I want to download the drivers on the internet and will not be a problem.
  
  ---------------------------------------------------------------------------------
  
  -The fundamental question is, HP did not provide drivers for Beats (IDT Audio Codec) Audio in the Windows 7 section.
  -The one provided under the article Windows 8 is 6.10.6433.0.
  
  I downloaded this and installed. It works fine until I have perform a normal shutdown of the system, every time I turn on my PC and actually reach the desktop, the system stops producing sounds later. I can hear his good Windows startup (that is before you get to the login screen) but no sound after I actually connect
  
  To resolve this problem, I always uninstall everything related to the IDT Audio Codec and then sounds back but the subwoofer of beats beneath my laptop works. The sound is quite low without the subwoofer, so I really need to install the drivers.
  
  I downloaded like 10 different drivers from the internet, tried all alone, but to meet the problem accurate even every time.
  
  I'm using Windows 7 Ultimate 64 bit. The exact model of the laptop is, laptop HP Pavilion m6 1090 - is.
  
  Please help me if possible.
  
  Kind regards
  Hannan.

  You are the very welcome.

  Here's what I recommend...

  Reinstall W7.

  And then install SP1 of the standalone download if your original installation of W7 does not include sp1.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5842

  Install these drivers in that order, then restart the PC after each driver is installed.

  1 chipset installation utility.

  2. AMD graphics card driver (this also installs the Intel HD graphics card, so it's the only one you must install).

  3 IDT Audio driver that I posted.

  4 Ethernet.

  Then, you can install the rest of the drivers in any order you want.

  I'm skeptical that the switchable graphics has your laptop works on W10.

  Some drivers W8 will work on W8.1, but some may not.

  In any case, first see if your laptop works OK even once with a new install of W7 SP1 and the correct drivers.

  If so, you can experiment with W8 and more recent here.

• Pavilion g6 2307el: LEGACY BOOT SELECTION does not WORK

  Hi, first sorry for my bad English , I have a big problem...

  4 days ago, that I decided to install a new os on my pc (pavilion g6 2307el).

  I installed win 7 64 bit, and to do this, I enabled the legacy boot.

  now, I have some problems with some drivers and for this reason I want to change my os originally win 8 64-bit.

  I have the original cd of victory CV 8 (when I installed win 7 has deleted everything on my pc; recovery partition ecc..) but it does not work... Infact when the legacy box is turned on and I press the f9 key I see 2 option. boot to the efi file or boot from the hard drive (I can't see cd boot or boot usb or other) and when I put inherited boot off the system tell me that it isn't any os on my pc, and in this case when I Press f9 I don't see anything...

  Please, I want to return my windows 8...

  can someone help me?

  Hi @pavilion9512

  Thank you for your request! No worries for tyour not English, also long as understand us each other, that we are very well.

  I understand that a few days ago, you wanted to downgrade to Windows 7, but after doing if some drivers were not available.

  Now, you want to perform a recovery from the disk that you created but are unable to get the option to boot to the optical drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order which will facilitate this process.

  Good luck!

• HP Pavilion 15 laptop: Uptime Intel CPU does not go to zero

  Hello

  Is it normal that my CPU uptime does not go to zero?

  When I quit the pc everythings is now closed (now because before I have a problem http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/hp-doesn-t-shut-down-or-hibernate-HP-Pavilion-... but now it is solved thanks @DavidPK for his help) when I start the pc is wake up normally but if I go to the Task Manager, I see the uptime of cpu does not go to zero. to do this, go to zero, the only way is to restart the computer after you watch...

  Is this a problem? If so can you help me?

  You can see my screenshoot

  

  Hello

  This is the normal case "quick start" is selected in the power options menu and there is really no problem with that. "

  You can always check that this is the case as follows.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows.

  Stop the notebook, then start it again and check the value of the CPU operating time.

  Personally, if it is not causing any trouble, I would turn on "quick start".

  Kind regards

  DP - K

• HP pavilion dv6 notebook (my dvd burner does not work

  I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

  I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

  need some advice.

  under Device Manager.  CD-ROM/DVD-rom readers

  HP cddvdwsn-208bb

  "device usb HP dvd writer 940D thank you billy'g"

  Hello

  Try please run now from the following link:
  
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Kind regards.

• Pavilion a1620e: Athlon 64 X 2 does not not with Mo A8M2N-(Nodus3) in the a1620e Pavilion

  Hello

  Pavilion a1620e (MB A8M2N-(NodusM3) with the following improvements:)

  RAM - 3 GB

  POWER 600 watt PSU

  GeForce 8800GTS

  Works well with WIN 7 64 bit.

  I want to upgrade the processor and like HP saying the Council is good for an Athlon 64 X 2 5000 + I tried one, but the computer refused to start - just constant high-speed fan and no other answer.

  My bios version is the 3.07 original. I would try 3.10 or 5.02, but it does not seem possible to download them.

  Any ideas would be appreciated.

  Thank you.

  OK
  It took a while, but now I have an AMD Athlon 64 x 2 5000 + to work in my HP Pavilion a1620e computer. After having no success with the original Windsor ((ADA5000IAA5CS) I bought a Brisbane (ADO5000IAA5DO) on Ebay for 5 euros and phenomena inside.
  
  All the research I did suggested the Brisbane does not work on the MB A8M2N-(Nodus3), but to my surprise the machine has started AND has been recognized by the BIOS. To test, I had just reinstalled the original 3500 + HSF and it was not long before that Core Temp indicated that the CPU became powerful hot so I turned off and order an ARCTIC Freezer 7 Pro Rev 2 HSF from Amazon. It is significantly larger than the stock of 3500 + HSF and I wasn't sure if it would fit in the case of a1620e, but it doesn't - come.
  
  It is easier to adjust by first removing the power supply (I found that it was possible to slide over the body in the way which rather than loose all their components wiring caps), then loosely tying the two tiny hold the SH screw brackets before attempting to fix in position. Once the heatsink in place the fan simply clips on it. Fan socket on the MB is three-pin, the Arctic Freezer 7 fan is four pins, but it fits the correct MB decision-making. The extra pin is for PWM speed control, but MB controls the speed of the fan very well without it.
  
  The new HSF runs much quieter than the original and control the temperature of 5000 + perfectly. I'm writing this Core Temp shows #0 27 C Core and Core #1 34 C, with a max since the start (an hour earlier) 41 & 50 respectively.
  
  Obviously, the new processor is faster than the old single 3500 + and worth it, if a power supply upgrade is, I think, required. The stock power supply was sorely lacking and I exchanged for a Watt ATX 630, which seems to do good with my Geforce 8800GTS and the new processor graphics card.
  
  I noticed that the computer CPU assembling start-up can freeze occasionally and need to be restarted. Once restarted it works fine. Usually only happens once, if at all and so far I have not found a problem.
  
  Also, I had the opportunity to examine under a glass strong mag Windsor 5000 + who did not later. One of the external pins had broken. It was almost impossible to see with the naked eye. He could well the reason why it did not work, so don't give up on Windsor if you have the A8M2N-(Nodus3), just avoid the Brisbane either. There are loads of Brisbane ADO5000IAA5DO go cheap over there and we could work just for you.
  
  A final remark on another subject: I do not know if a member of the staff of HP take the trouble to read these forums (probably not!) but since the beginning of my research, many of the useful pages of HP customer service have disappeared from their website and redirected to a page of "Welcome to HP customer support" useless. In fact, for those of us with older computers HP does no service the customer at all. I have two HP computers: a Pavilion a1620e (the subject of this post) and a workstation XW4600. They will be the latest products from HP that I will buy. The XW4600 is still supported, probably because it has been sold for commercial application. Small vintage, produced for the individual products are not. I can understand HP did not want to spend money on the updates to the bios, etc. of these older products, but to remove all references to them shows a cynical disregard for a customer who, if they make sense, now will never buy an HP product again. Shame on you HP!

• HP Pavilion mode # 15 - n065: standby / Hibernation does not not on this laptop (model # 15 - n065) (10-window-pro, 64-bit).

  Hello

  I've updated my laptop HP for Windows - 10 - PRO EDITION (64-bit).
  
  Update went well.

  All the drivers seem to be installed device and work.

  Operating system works very well.

  I'm having a problem with sleep / Hibrernation modes.

  When I close the lid for a few seconds and then reopen the lid the laptop does not wake up.

  When the computer goes to sleep it seems to go in hibernation. Even though I disabled the hibernation in the power of the system settings.

  When I press a key on the keyboard of the laptop won't wake up.

  It will not wake up from sleep or hibernation mode.

  I need to power cycle the notebook to log in Notepad.

  My laptop (HP 15.6 "15r011dx with the baytrail-M Intel Pentium platform) works very well with Windows-10 and wake up very well to the mode sleep and extended. So, I know what present works with Windows-10.

  How can I fix?

  Do I need to install other drivers/software?

  This feature is not supported on this HP laptop?

  Thanks in advance,
  Alex

  -----------------------------------

  My hardware:

  HP Pavilion 15.6 "laptop with Intel-Core-i3 4005U haswell CPU (model # 15 - n065)
  Product # E8B13UA #ABA

  ------------------------------------

  

  Hello

  Please find the link given below might help you solve your problem.

  http://support.HP.com/us-en/document/c03383935

• HP Pavilion F6 / Mute key Light-Now does not?

  Hello

  A little over a week ago, I went out and bought a HP Pavilion 15 laptop-e092ea.

  It's a brilliant machine and I'm really happy with it, but there is just one small thing that has popped up.

  I'm sure many of you know, Pavilion series laptops have a mute very practice that serves to the F6 key. This key is a small LED that lights up when you press on to show that the computer is cut.  Until yesterday that the light was working fine until something came on the screen mentioning an update of the BIOS. I went ahead with the update and everything seemed fine. I then discovered that the LED was not lit when I used the key to turn off the computer.

  I tried to reinstall the audio drivers and restart the computer several times after reading some information on the forums, but nothing works. The key still works perfectly, but given that the computer is fairly new, I just fix the problem. I would take it to a repair place, but it is too small and the pricing is not fair in the slightest.

  The lights of the Caps Lock, button / stop and led for Mode without wire/flight work, it's just that touch Mute, that does not illuminate. As I said, this is a minor thing but I would be nice just to have working again.

  I am running Windows 8.1 if it's of any help.

  Anyone know how I can fix this problem? The update of the BIOS could affect it at all?

  Thanks to all those who can help you.

  Thanks for your reply.

  In fact, I managed to get the light works again after reinstallation of an audio driver using HP Recovery Manager.

  I tried to reinstall the driver using the Windows Device Manager, but it had not worked.

  As soon as I used the Recovery Manager when amber was light once more.

  Thanks for your help.