Similar Questions

• SL500 XP mode standby / Hibernation does not

  I did a clean install of Windows XP and installed the drivers. Mainly the power management driver. But the standby and hibernation does not always work. I don't have even as options in windows.

  I have another installation of XP has been transferred from an old R52 laptop and everything works it.

  Any ideas on what I might be missing?

  I had to install the latest Intel video device driver. Now it's working.

• Tecra M2 - standby, hibernation does not work

  I use Tecra M2 with Windows XP and Office 2003. If I try to put my cell phone in "standby" mode or "Hibernate" nothing happens... the computer remains always on. Only "disconnect" and "closing" works correct. Also do not work Fn + F3 and Fn + F4.
  Any ideas?

  Hello

  you have the Toshiba Power Saver installed? If so, you must uninstall and download the current https://eu.computers.toshiba-europe.com

  If this solution does not keep me!

  Chris

• Satellite Pro A300: Win 7 Upgrade DVD does not list my laptop model

  I bought a Satellite Pro A300 that came with Windows Vista pre-installed on it. I was offered a Windows 7 Uprgrade for 30 by Toshiba that I bought and got 2 discs:

  (1) Windows 7 Upgrade disc
  (2) Toshiba Win7 Drivers Upgrade drive

  I have updated successfully however the drivers Toshiba disk does not list my model of laptop. I tried to install the drivers on the disk for the OEM software such as drivers of web cam (which are not available online), but they do not work. Also now my DVD player does not open and I can't view the contents of the disc?

  Can someone advise who I come into contact with to get a drive for my laptop model?

  Hello

  What model of laptop do you have?

  Have you tried to choose another model instead of your laptop model?
  Do this!

  I read about a similar question here in the forum and the user could solve this choose another laptop model number.

  By the way; all Win7 drivers can be downloaded from the page of European driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com

  See you soon

• HP Pavilion DV2700 Special Edition which is the max ram for this laptop model?

  HP Pavilion DV2700 Special Edition VERVE

  Windows Vista 64-bit Service Pack 2 operating system

  Year 2007

  AMD Turion 64 X 2 TL - 60 2.0 GHz processor

  Course Ram 4 GB

  would like to know what is the max ram

  PS

  Can I install and another processor or is it integrated with the motherboard. ?

  Thanks in advance for your time to look at my question

  Indarktimes

  Hello

  Please find the link given below for your device model that Max supported Memory is 4 GB.

  http://h10010.www1.HP.com/wwpc/ca/en/Ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202.html?DNR=1

• Administrator Bios password does not work on HP 4420 s XT940UT #ABA Windows 7 64-bit

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits I suppose initially that he came with? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Once you open a session with the service the customer of HP one case of pension, they will provide once the utility you and steps to execute it. who can capture the UUID. BTW - UUID is a unique ID for each machine (16 digits or more) stored in the BIOS itself.

  Once the results of the utility (UUID and other info) in the log file, shared with HP, they can generate a key file (SMC) to reset.

  Well, depertment of technical support can help you in it, no need to ask for anyone in particular or the Department.

  It will be useful.

• does not install the new update for iTunes for windows 7 (64-bit)

  I have windows 7 on a 64-bit computer. I have installed, uninstalled and reinstalled iTunes more and more and more nothing helps. I get the same message every time... The Apple Mobile Device service does not start and displays error 1053 and an error 7 (windows 193).  Windows has been updated. I worked on it for 2 days! So frustrating! Ready to give up on Apple and Windows all together. I also fixed the registry, did a clean boot, and yet, I'm having a problem... Help!

  Hi all

  After uninstalling and cleaning everything about Apple, I installed this version (Special?):

  http://support.Apple.com/kb/DL1784?viewlocale=en_US&locale=en_US

  And it works on my Win 7 HP 64 - bit!

  Good luck!

• Standby/hibernation does not work on satellite

  Click on start/stop of the computer/standby and nothing happens.

  Hibernation icons and the day before are not active just stop and cancel it.

  Can anyone help.

  Hi Colin,

  Go to the Toshiba power management option and click on the "Advanced" tab make sure that the enable hibernation support option is checked. Alternatively, if you use Microsoft power options, then click the Hibernate tab, and check that put into hibernation is enabled.

  Kind regards

• I have a HPw2207 monitor that does not work in the vertical position operating under Windows 7 64-bit.

  I use a HP Pavilion p6-2033w PC. It was fine on XP. Any suggestions?

  Hello

  I had no problem downloading the driver for monitor for my PC.  You should be able to download and save the driver from the monitor on your PC.  Then try the installation again.

  Turn off your PC and try a reset monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

  After you download on the Windows desktop, right of the mouse on the desktop and select the resolution.  You should be able to select the desired screen orientation.

• Webcam HP-101 does not after that I updated the OS to windows 7 (64 bit) to windows 8 (64-bit).

  I urgently need my webcam this week for a place of encounter of the celebrity, and I'm upset.
  I tried several measures then 15 and already spent a day on same; [Content deleted]
  Here is my pc name and number-
  HP Pavilion Notebook PC g6
  LP235EA #ACB
  
  All the drivers are updated
  
  the cam is nt shown under imaging devices; He has appeared in other devices Port_ #0005.Hub_ #0004
  
  Please msg me; If anyone can help me through teamviewer; Please
  
  hard reset, running on cmd, uninstalling the driver, analysis of material changes in the imaging devices, then reinstall etc etc; I've tried everything
  
  

  I'll make a few suggestions here based on an upgrade in situ at W8 and not a pure install _ a clean installation being a total erase of the disk to install W8, rather then by installing W8 while there is W7 disk.

  Go to programs and features and uninstall your software Cyberlink you Cam.

  Download CCleaner and run a registry cleaner as many times as necessary until it finds nothing and reboot.

  Run again and if it still finds things, repeat the process until it finds nothing.

  http://www.filehippo.com/download_ccleaner/

  Do not use any other registry cleaner.

  Install your YouCam software and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104747-1&CC=US&DLC=en&LC=en&os=4063&Product=5076816&sw_lang=

  Save the file on the desktop and install it from there, not in a temporary folder.

  Restart once it's done.

  If this doean can't work, try to do a clean install, assuming that it was an upgrade.

  If you need a web cam to malfunction, return to W7.

  Did you create your recovery media or the recovery still on the hard drive partition and it is healthy?

  Another thing to try is to upgrade the BIOS, if you did not. However, there is nothing in the updates which improves the functionality of the web cam in W8.

  If you do not want to update the BIOS, post again for the detailed instructions, it do not try your self.

• My scroll on my touchpad does not work anymore.its a Hp620 WT090EA #ABU, windows 7, 64 bit

  I just noticed this morning and as far I know there were no injuries to the laptop, I used it yesternite and it was A want was just tring to install a game today which has failed and after that it just works more... pls help

  Hello

  Try to reinstall the Synaptics driver as follows.

  Download the installer from Synaptics of the page on the link below and save this to your downloads folder.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4158863&prodNameId=4158501&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-86824-1

  Then, open windows control panel, open programs and features, make a right click the entry for the Synaptics Pointing Device Driver and choose uninstall.  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Yet once, once done, reboot the laptop.

  Kind regards

  DP - K

• Error: 0 x 87160129 the file may be corrupted or in a format does not recognize this Director

  Try to make a video about windows live movie maker... and download the photos to my computer and I get this message!

  Error: 0 x 87160129 the file may be corrupted or in a format does not recognize this Director

  It's a Windows vista... Home (64-Bit operating system)

  Thanks for any input.

  Hi BrendaKennedy,

  When you use Windows Live Movie Maker and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

   

  Movie Maker Portal

  http://windowslivehelp.com/product.aspx?ProductID=5

  I hope this helps.

• Re: Not possible to enter sleep/standby extended - standby/hibernation is not allowed now

  No matter what method I use to try to switch to Stanby or hibernation mode, a prompt indicating "standby/hibernation is not allowed now" appears.

  For example, this happens when I go through start-> shut down the computer, or when I close the lid of my computer that I put to sleep mode.

  Help, please! Thank you!

  Hello

  First of al I'd like to know what model of laptop you have.
  Then it is possible that the Hibernate mode.

  Please check the settings if Toshiba Power Saver was installed on the laptop to save energy, and then check the settings there.
  Otherwise, you must check the power Windows Option in the control panel

  See you soon

• Windows 7 auto mde sleep and hibernation does not

  Hello

  I am Windows 7 64 bit Home Premium SP1 - computer laptop ASUS K55A and automatic sleep mode / hibernation does not work.

  Please tell us what to do to fix.

  Thank you

  Lynne

  Thank you for your time and your answers...

  I ran the Microsoft Fix It and now everything seems to work very well. .  sleep/wake extended and even the screen saver is now working.

  I am a very happy customer.

  Difficulty of MS is an excellent solution - and easy to use.

  See you soon
  Lynne Carter

• iPhone 5 on/standby button does not.

  iPhone 5 on/standby button does not

  • Re: iPhone 5/sleep button does not

  Visit your Apple store or an authorized service provider and seek redress.