PAVILION G6-2236TX: Wifi works intermittently

Similar Questions

• Pavilion G6 2342dx, Wifi works does not after update driver recommended

  Hello. I have Pavilion G6 2342dx running Windows 8. Yesterday, I used HP support assistant to perform some recommended driver updates. Among the things to day was the device of Qualcomm Atheros Wifi driver and the driver of HP wireless button. Peripheral installed WIFI was 10... 222, 10... 212.

  After the update, my laptop cannot detect any wifi network. This shows simply 'no detected networks.' I also noticed that the light on the button wifi (F12) is always white If yes or no I activate flight mode or not. I get a message on the screen of property on the change in status of airplane mode. However, it doesn't seem to be actually toggle the wifi because of the sidebar, it looks like wifi is on but with the message "no media detected" persistent. In addition, wifi on the status bar icon is grayed out with a red x.

  I tried deactivating and activating the adapter without success. I tried to download and reinstall the driver (10... 212) with no luck. I even tried to disable, uninstall and then reinstall the device in Device Manager. System restore fails whenever I have it try. Interestingly, the last driver on the HP support Web site is the 212, no mention of the 222 pilot.

  Everyone has experienced the same? I would really appreaciate help on what I am completely stuck.

  Hi @futoji,

  Thanks for all the help. I finally resorted when you run the upgrade to Windows 8.1 and that seemed to take care of the problem.

• HP Pavilion dv7-6c27cl: which is right for Hp pavilion dv7-6c27cl wifi driver

  Installed windows 7 64 bit, but none of the drivers on the HP site wifi worked! Anyone know what is the right for Hp pavilion dv7-6c27cl wifi driver

  Hello:

  You need the driver for the wireless card model that your laptop is...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_105197_1&swEnvOid=4058

• 8.1 Bluetooth HP Pavilion g6-2236tx window does not

  My laptop model HP Pavilion G6-2236tx.

  I'm upgrading window 8 to 8.1 window. But Bluetooth does not. I'm install pack driver bluetooth 3, more

  1 Intel Bluetooth Driver 2.6

  2 Qualcomm Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows 8 1.00

  3. Bluetooth Ralink Driver 9.2.10.10 software

  Help me

  Thank you

  Hello:

  See if this driver W8.1 BT works...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130262_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP pavilion g6, feature WiFi will not turn. light stays amber.

  Hello

  My hp pavilion g6 laptop stopped working WiFi suddenly.  I get an error that says the ability is disabled and LAN is not connected.    I press the f12 key to turn on but nothing works.   Help, please.  Thank you.  The witness remains in yellow does not change to white after pressing f12.

  It's a pc hp laptop pavilion g6-1b59wm

  I have 7 Home premium havewindows

  Product: LW354UA #ABA

  Regulatory model: REPLACEMENT - 194C

  In the research and who desire to be this resolved as quickly as possible, I found my own solution. I do not know for how long but... Here's why.

  The problem seeemed in HP connection manager, I went into preferences and activated the wifi via here.  The amber light turned to white.   I tested and it was able to connect to my email.   (YAY!)  and have access to the internet.   I use hotspot and never had a problem with it before, and now, I have also this laptop that I use for this post, and also out of my access point.    the reason why I'm saying that I don't know for how long is this...

  HP connection manager is always read that Wi - Fi (Wireless LAN) is off - still my light is white and I am able to go online and sign up to my email.     ?????

  Thanks I solved my own solution to this. YAY! I'm so happy and excited, happy and proud at the same time. Way to go me. and Yes, BRAVO for me also.

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• Utilities airport shows a triangle Orange on Time Capsule, Wifi working

  Recently, my Time capsule is showing an orange triangle in AP-utility. By clicking on it, it shows the message: AP Time capsule found, with the possibility to forget.

  Time capsule shows a steady green light. Wifi is good job and my two other airports Express are being lit in the utility.

  I've read other discussions with similar problems. So, I did the following things:

  (1) soft reset of time capsule,

  (2) Changed link local IPv6 settings

  (3) disabled firewall

  (4) settings saved and restarted.

  It did not help for long after a few minutes the triangle orange has shown once again.

  In Time Machine, time capsule HD is not recognized or the other.

  But the wifi works perfectly.

  Please notify.

  I think that the problem is resolved.

  In this link, I found a solutionTime capsule will appear but the WIFI connection works

  He is working on 2 hours >.

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• My iphone 6 has no service and always looking. WiFi works, sprint is not sure what is wrong with it. no damage ever to the phone. factory reset did not fix the it. Please advise?

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  isoldier86 wrote:

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  Get help with hardware features on your iPhone, iPad and iPod touch - Apple Support

• Unable to connect TC after modem swap, although wifi works very well.

  Time Warner Cable send me a new modem. (Technicolor)

  It is installed, enabled, and and the wifi works through my Time Capsule (1 TB 802.11n).

  But the TC blinks yellow and is no longer available on my iMac (Yosemite 10.10.3, 3.2 GHz Intel Core i3, 4 GB 1333 MHz DDR3)

  I restarted the mac, the modem and the TC, repeatedly.

  I have not tried a reset on the TC...

  It is installed, enabled, and and the wifi works through my Time Capsule (1 TB 802.11n).

  The last piece of this... WiFi works through my TC... sorry this is not possible.

  I have not tried a reset on the TC...

  Transport CANADA must be plugged in by ethernet on the main modem. If it's a router. Then the TC must be filled.

  But regardless of how it works you can not remove the ethernet of the TC.

  Transport CANADA should also create a wireless network and the Mac must connect directly to the TC otherwise on Yosemite or the BONES later, it will be more reliable and disappear from the network.

  So reset the TC... no files are lost and re-do the installation.

• Re: Wifi works fine on an AC/DC power supply. And very slow on battery

  Dear friends!

  When I use my laptop on AC/DC adapter, wifi works perfectly. Fast and without any problems.
  But after that I use it on battery, wifi works very slowly. I wait about a minute or two to open any site.
  Yes, it works, but very very slow. When I connect the card once again, immediately without any problems!
  The same site opens in seconds!
  What do you think of this problem?

  Thank you very much

  I could solve the similar problem on my laptop by changing settings in the WLan card properties.

  Go to _device-> advanced-> properties-> tab_ Wlan card Manager

  Here I put the on OFF power saving mode (turn off).

  This option controls the power resources if the laptop is running on battery
  So disable it and see if you can notice some improvements.

  Concerning

• Satellite L40-15B - WiFi works at home but not at school

  My daughter has satellite worked at home and at school: wifi OK, internet OK. The satellite crashed: hard disk failure. Bought a new hard drive.

  I reset the Satellite via the recovery CD. It is now a new clean system with * Windows Vista home premium *. * Wifi works immediately at home. Internet too, but at school with my daughter, the wifi is NOT working anymore.*
  Laptops from other children at school always work with wifi.

  A college of my work told me his sister had exactly the same problem!

  Help!

  Hello

  If the WIFI connection works at home but not at school it has nothing to do with Toshiba. I think that your daughter should ask the administrator of the school what is the problem. Maybe the WLAN requires a certain configuration of TCP/IP or else I n t he know and I think that no one here can answer this question.

  Is that wireless network card is properly installed and works, because you can access the Internet at home.

  Sorry, but everything that s what I can say.

• WiFi worked very well. Tried to connect the second device. "Wi - Fi auto-assignée 169.254.49.8 IP address and won't be able to connect... »

  One of our MacBook has been connected to the internet through our router base station Airport Express wireless and wifi worked very well. All of a sudden, the other MacBook could not connect. After a few days of no connection on one while the other worked, we rebooted the modem. Now neither laptop connects. We called our ISP and they verified that all is well with our internet service or the modem. Internet works fine with the cable plugged directly on each machine. Under network in system preferences, I get this message: "Wi - Fi 169.254.49.8 auto assigned IP address and won't be able to connect to the internet." When I run the diagnostic, I get a message saying that my network configuration has changed, but it has not changed anything. We have never gone and nothing changed since we first set up the modem and the AEBS. Any ideas on how to solve this problem?

  Yes, the express can do that... Suddenly lose the configuration and return to the bridge for example even when connected to a modem to bridge.

  The solution is simple... Press reset and redo the Express installation.

  NOTE... an Express is not expected that the main router... It's light to etc. of airprint, airplay wireless bridge. Don't wait to have no problems when you use the Express to do the work of the extreme or TC or another router should do.

• My 2000 wireless optical mouse scroll wheel works intermittently-"mouse sigal is low."

  Original title: my 2000 optical wireless mouse scroll wheel works intermittently

  I recently bought a set of wireless with an optical mouse wireless 2000, office 100 wireless keyboard and a wireless desktop kit 3.1 receiver. After you have installed the drivers and the Intellitype/point than roulette software of the mouse does not work all the time, for example after clicking on my way in a 80 page PDF manual and long Web page that the wheel seems to not work in one direction, then the other way won't work. I tried new batteries, latest driver bouquet of microsoft site (intellipoint 8.01) moving to the receiver or away to "signal low mouse." Today, however, the mouse is 2-3 feet away from the receiver and it keeps popping up saying ' the mouse sigal is low you want to start the troubleshooter? Yes, I tried this and tried to move the USB without success. Can someone HELP please... Tired of drag and drop

  Same problem here, but I found a way to make this work (in fact there are two ways LOL)

  -Remove one of the batteries.  Believe it or not, the scroll wheel works perfectly when I remove one of the battery (any).  However, I do not know how long it will last since there isn't that one battery in operation.

  OR

  -Remove the lid of dough and remove the batteries.  Use a screwdriver to loosen the screw about 2 rounds (for some reason, I think that it is screwed in too tight).  Replace the batteries and you are or that you set.

  I can't guarantee that my methods will still work, but the fact is that it works for me since then.