Pavilion g6 2305tx: internal microphone problem for the note book!

Similar Questions

• Pavilion g7t-1100: Internal Microphone does not work do not on HP Pavilion g7t-1100 after winning 10 update

  Can someone (1) confirm that this model of laptop computer has an internal microphone and (2) say how to operate?

  Story:

  I've had this laptop for several years with Win 7 64 bit, recently upgraded to win 10 64-bit edition.  When you run Windows 7, I've certainly used an external microphone with the Jack, but I'm not sure I've ever used the internal mic.  Yesterday I tried to use Skype and couldn't get the microphone to work (I don't have an external mike where I am now).  Started trying to analyze and the only peripheral record listed in the recording of the sound control Panel tab is "Stereo Mix, IDT High Definition Audio CODEC" - don't know if this applies to the internal mic.  Speaking to, or by tapping on the hole of the microphone above the display caused no response at all in the level to the right of the window bars.

  Began to doubt that I have an internal mike, so looked up specifications.  On http://support.hp.com/us-en/document/c02910495, I found "Webcam with integrated digital Microphone (VGA)", which led me to go on webcam integrated under imaging devices.  Still no final confirmation that I have a mike internal, but I found a laptop computer with mike identified next to the webcam image, this corresponds to my laptop, so I really think that the material is there.

  I used Device Manager to check the updates for the device webcam (HP Webcam-101), and he says that the drivers are up to date.  I did the same thing for the IDT High Definition Audio CODEC, also updated.  I think that the drivers have been updated when I upgraded to win 10 in February.

  That's it - information or suggestions are welcome.

  Hi there @BruceBon,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the microphone on your HP Pavilion g7t-1100 CTO Notebook PC.

  The reason why you can't find loads or User Guides/Manuals books appropriate because the model you have is a laptop CTO, this means it is customized/configured to order. Where did you get to buy your laptop?

  When I went to the Service Guide and HP Pavilion G7 maintenance (generic), it shows an internal microphone located at the top of the LCD, but again, your laptop is a CTO model this is why there is no specification of final product because each of them can be customized.

  You can try to look over some of the screenshots in the microphone troubleshooting document. There are a few sections of this document that you can try.

  • Using the troubleshooting tool
  • Check the settings of the sound
  • Rise in the level of the microphone volume

  If you right click you see him show disabled devices and display devices disconnected in the recording of the Properties tab?

  They have check marks next to them?

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems, and where you bought your laptop from.

  Have a great day!

  Thank you!

• recover hp pavilion dv4-1504tu model: VV020PA #UUF for the 32 bit Windows 7

  Help me to recover hp pavilion dv4-1504tu model: VV020PA #UUF for the 32-bit Windows 7.

  Thank you

  Hello

  The 3 main methods to restore your laptop to "Factory Condition" can be found on the following link.

  http://support.HP.com/us-en/document/c01867418

  Kind regards

  DP - K

• Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on t

  Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on this issue.

  single user licenses allow you to use the adobe corporate programs and allow to sell the products that you create using adobe programs.

• I think my computer has an internal microphone, but I'm not sure how will I know

  I have a HP probook s seriesand I run windows 7. my computer has a webcam and I think he has an internal microphone, but I'm not sure. How will I know

  Read the manual!

  See you soon,.
  Jerry

• Window of "research/fliter' for the address book stop working

  Window of "research/fliter' for the address book worked well until I tried today, v 31.6.0. (win 7) Just updated to 31.7.0 and still no search results. Typing in characters do not appear possible matches (name/email selected option). However, CTRL + SHIFT + F works very well in the address book search. How can I get the search/filter window to work as he did? Thank you.

  ajb328 said

  Window of "research/fliter' for the address book worked well until I tried today, v 31.6.0. (win 7) Just updated to 31.7.0 and still no search results. Typing in characters do not appear possible matches (name/email selected option). However, CTRL + SHIFT + F works very well in the address book search. How can I get the search/filter window to work as he did? Thank you.

• iBook charged me twice for the same books

  Hello

  I bought books author michael Sinclair, but all of a sudden they disapeard in my library and when I tried to download iBook again charged me again for the same books?

  How can I get my money back and my purchased books

  Thank you

  Ghalia

  If you can redownload them depends on if the rights holder has removed their shop, or if you have moved since their purchase (and if you use the same account as you bought them with). You their redownloaded via the tab purchased in the iBooks on your iPad app (if they do not it check to see if you have hidden the cloud: mask and unmask purchases iTunes or iBooks on your Mac or PC - Apple support), or in the store (if they are the same version of the book they should have icons of cloud on them if it is not currently downloaded)?

  If versions of the books that you have purchased have been removed and replaced by new books, they can be considered as new purchases (and would have a price on them button in the store), so you will be charged to buy these new versions.

  If you wish to contact iTunes Support: http://reportaproblem.apple.com or https://www.apple.com/emea/support/itunes/contact.html

• Pavilion dv7 - 1243cl: Questions of compensation for the motherboard component

  I have the following related material two 2 for hp experts, and both issues are with respect to the same JBK00 - 4091 P Rev 1 a motherboard, which is installed in a computer hp Pavilion dv7 - 1243 cl laptop:

  Below, I've included a picture that relates to both of my questions.

  QUESTION #1: I accidentally lost a resistance in repair motherboard of my friend. None of the experts know the ohm value of resistance R610?

  As you can probably tell from the image, below, I accidentally ripped out all the pads of twelve 12 pins on the motherboard for FFC connector JP36 (pictured below), so I have to fill each of the connections with wire 30AWG pin connector FFC (JP36). That said, I have been unable to trace the pin #10 connector FFC to any component on the motherboard, so my last question is the following:

  QUESTION #2: Regarding the twelve 12-pin FFC connector as shown in the image below (component no. PCB: JP36), which component pin #10 connects to the motherboard?

  Any help would be DEEPLY appreciated!

  

  I thought about it, so I thought I'd post the answer just in case someone else has the same problem in the future.

  R611 = 0.1 Ω

  R610 = 0.1 Ω

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

• Pavilion dv7-6157 can be upgraded for the games?

  I bought my son the Pavilion dv7-6157nr two years ago and he has problems with graphics on the high-end gaming, he plays. They freeze or crash. It has 8 G DDR3 SDRam, 2 generation Intel Core i7 2.2 GHz - 3.10 turbo and a radeon HD 6770Ms graphics card. Video memory it says "itchable graphics"... What does that mean?  This computer can evolve in a way that would help the graphics? Y at - it a graphics card or driver upgrade? More graphics memory can be affected?

  I'm tired of hearing that suck laptops.

  Laptops are not really designed or constructed for the high end games. I doubt that adding memory will make much difference. Given that the two most important points (CPU and GPU) cannot be updated easily, it is a losing battle.

  The only other options I can suggest are...

  (1) a HP System Recovery to return the computer to a factory like State

  (2) do a clean install of WIndows 7 and try to use latest drivers for chipset manufacturers

  (3) buy a new computer that exceeds the requirements of game

  If you have any other questions, feel free to ask.

   

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Upgrading to Windows 7 HP Pavilion dv6500 and have a problem with the resolution

  OK, here's my problem. I had Windows Vista, has been sick with it. I'm not used to ask someone if I can or can not install some software or OS, so I have two formatted partitions (recovery hp too) and installed windows 7 now, I discovered that he had a lot of problems with the drivers. I have successfully resolved all of them, even my hp legacy works and everything else, except the driver Nvidia. My screen resolution is 1024 x 768 and should be 1280 x 800. I tried all the drivers that are provided in the topic above here (dv6000 - dv9000 update for Win 7 or something like that) also downloaded and installed this driver "179.48_notebook_winvista_win7_32bit_beta", nothing helps worked on this problem for 2 days, am tired and ask for help I need resolution 1280 x 800 on my screen , and I now have 1024 x 768.
  Product: HP Pavilion dv6500
  s/n: CNF7310HBF

  p/n: GT391EA #ABB

  AMD Athlon X 2 and probably GeForce 7 GB video series...

  PS sory for my English.

  Dan or one of the others may be able to help if you post exactly what indicates the error.

  As you say you are not a noob so maybe you need to change something in the NVIDIA Control Panel. Maybe go to the advanced option when you're at NVIDIA.

  Personally when I clean installs I delete, and format the entire disk before installing W7. Doing it this way usually prevents this kind of error occurs. When you use the W7 install disk to format, it may not remove all of the old files registry Vista and can cause problems.

  If you start from scratch once again, this may solve your problem, but there is no guarantee.

  It took 4 tries on my HDX from Vista to W7 to do things.

  I just took a glance at my NVIDIA advanced and under Show options there is an option to "manage custom resolutions. Here I could input what I wanted. What's your has that?

• The 9.3.1 update solved this problem for the ipad 2?

  I have two IPAD 2. I update one of them with the 9.3 and it has corrupted so I had to take it to the Apple store to get it fixed. I was told in the store do not update the second IPAD2 until a new update is released that fixes this problem. I saw the 9.3.1 cane out however, he specifically said he solved the problem of the ipad2. Can you please clarify if the new update fixes

  Apple took you for their promlems on you're your ipad 2 after update with the new software, 9.3.1, which created some promblems with our our ipads

• a problem with the notes for mac

  Notes has locked up. Screen is unresponsive to the mouse or keyboard. In addition, menu notes is mostly gray. OS X version 10.9.5

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

  Safe mode - Mavericks

• NB300 internal microphone problem

  Recently used Skype and MSN and everything worked well.
  Then tried to download audio files of dctaphone using micro taken again seems to work ok.

  However now barely audible microphone on NB300 at reception of machines.
  Screen surround ultra sensitive and sharp comments sometimes.

  Downloaded video downlaods but no significant improvement.
  Concerned, it can be hardware not software.
  Toshiba machine diagnosis do not identify a problem.

  Any help is appreciated as technically not mind too much.
  Iain

  Hello

  I'm not very well if I understand you is good, but it seems that you have noticed a sound coming from speakers and right feedback micro m?
  I noticed this on my A600 unit, you must disable the microphone volume in the speakers properties.

  Have a look here:
  http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

  Hope this can help you

• T400 own install problem for the graphics card hybrid

  I did a clean install on the T400 and installed all the drivers that are essential under the SWTools folder, but I see a problem with the card ATI will not work correctly.

  After installation from the folder videos and restarted the laptop. There is a sign next to the 'ATI Mobility Radeon HD 3400 Series' in Device Manager

  Under device status, I see the following error message

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Has anyone seen this error? I tried to reinstall the driver again, but that does not solve the problem. Actually, the PowerManager now has trouble switching graphics, with the balloon message "system cannot activate graphics high-performance" close all 3D applications or video and disconnect the external screens. " Switch graphics processors. »

  Any suggestions on how to fix this?

  The model is 2764-CTO

  Just figured it out. This feature requires Vista SP1. Since my Vista disk is the original disc of RTM without SP1, this is why I came across this problem.