Pavilion G6: Create a Windows 7 disc Pavilion g6

Similar Questions

• I need to create a windows reinstallation disc

  I need to create a disk to reinstall windows.
  I picked up a virus and mcafee are not able to remove it if you need to reinstall windows...

  The recovery disk create function coverage this?

  Hello

  You mean, you want to create a recovery disk.
  What cell phone do you have?
  You have preinstalled software called Toshiba Recovery Disk Creator?
  If so, try this.
  Usually, this software creates a Toshiba Recovery disk that helps you to restore the operating system to factory settings.
  But note; This will of functions using only the operating system preinstalled by Toshiba.

  The other option might be (if available) HARD drive recovery
  Try pressing F8 (when starting laptop computer), and then select Repair my computer, then HARD drive recovery

• create dvd Windows preview disc fine but audio quality has decreased after the midpoint

  It is my first experience with the creation of windows dvd in Windows 7.  It is simple to use with regard to loading photos and songs; I've added 400 pictures and 14 songs.  all previewed well but not serious dvd reproduce the same audio quality.  first half was ok, but then the audio quality degraded, agitated on the first and full entry finally put an end to all audio and video.  Repeat the burning process and the next dvd had the same question.

  need help please!

  It is my first experience with the creation of windows dvd in Windows 7.  It is simple to use with regard to loading photos and songs; I've added 400 pictures and 14 songs.  all previewed well but not serious dvd reproduce the same audio quality.  first half was ok, but then the audio quality degraded, agitated on the first and full entry finally put an end to all audio and video.  Repeat the burning process and the next dvd had the same question.

  need help please!

  ===========================================================
  Have you used an assortment of Audio files... IOW... not all from the same source?

  May be that one or more of your source files are not fully compatible or are corrupted.

  The more reliable format for audio in Movie Maker and DVD Maker is WMA.

  Also... the following article is maybe worth a visit:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

• capabilities of Windows recovery disc

  If I create a windows recovery disc on my computer windows 7, can I use this disc in another computer? as a windows vista my friend gave me, if used the command format c, can use the recovery disk to install windows 7 on this computer?

  No, it can only be used for purposes of diagnosis and startup repair. You need a full Windows 7 disc in order to perform a full installation.

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• Mapping to a Windows 7 disc from a XP platform, it creates the connection but it says "share: denied \Access.»

  Original title: mapping to a Windows 7 disc for XP platform

  Hi all is there anyone who can help me with the mapping a drive of windows 7 from my xp machine? I shared the drive on the computer 7 and everyone has permissions with full game. I can map other machines windows 7 itself but not some xp machines. I can ping the machine 7 machine xp with the address and the name of the computer. Now when I map the drive to create the connection but it says "share: denied \Access.»
  Any help is greatly appreciated.

  Hello Jgg5037,

  Double check to make sure that all computers are part of the same working group:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_ident_join_workgroup.mspx?mfr=true
  Disable host group on the Windows 7 computer:
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions
  Let us know if any of these methods help you resolve the error "access denied."

• Unable to create a windows 7 64 bit repair disc

  I have a Toshiba Satellite L745 S4210 with Windows 7 Home Premium. I am trying to create a system repair disc so I can undo a dual boot. However, when I followed the tutorial for the creation of the ERD, the program is not yet run for a second, then it crashes. I did research further and discovered far from the to do for Toshiba computers, but I can't do that either. Attached is image o the error messages I receive. Any help would be appreciated.

  I could find another computer with windows 7 64 and which allows to create a repair disk.

• Get an error "Windows repair disc has stopped working' when creating Windows 7 repair disc.

  * Original title: Windows 7 cannot create a repair disk

  Hello

  I have a new alienware desktop computer running windows 7. When I try to create a system repair disc, I get an error message that says that Windows repair disc has stopped working, this happens until I get to the screen that allows to select a drive. Here is the crash report. I have read some of the related posts and I don't think I have the synchronization of the box and I did not backup Dell although I have something called AlienRespawn.  Please help thanks.

  Problem event name: APPCRASH

  Application name: recdisc.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce7990e

  Fault Module name: ole32.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c92c

  Exception code: c0000005

  Exception offset: 00000000000284fb

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: e574

  More information 2: e57488545f86d383cf00c40c411daee5

  3 more information: 6d8c

  Additional information 4: 6d8c259a187c440c17982de29c5dc6e7

  Hello

  The problem was definitely Alienrespawn. I was able to create the with Alienrespawn recovery disk and turned off once I was able to create in Windows 7.

  Thank you very much for the help!

• ACER recovery to create a USB bootable Windows 10 disc.

  I used ACER Recovery of my Aspire E5-511-C7X7 to create a Windows 10 bootable USB drive. The USB key that I used was a 1 terabyte external hard drive.
  Once the process is complete, the drive appears as 32 gigabytes, with 18 GB used.
  What happened to the rest of the storage?

  It's a WD (Western Digital) Eleemnts 1 terabyte drive

• Create a system repair disc?

  Hello:

  RE: HP Pavilion DV-7-4270us Windows 7 64-bit

  Recently, I replaced an internal hard drive on the pc that is referenced above. I have re-installed the drivers and software I want.

  My next step would be to create a System Image disc?

  (I created a restore of the system or the rescue disks while the computer is new, but it would not be installed on the new hard drive, so I'm cautious in doing that, once again, because it wasn't before).

  Thank you

  Hello:

  Yes, I use Windows 7 backup tool and do a system image and a system of disc repair, so you can access the system image.

  I recommend that you use a portable hard drive, and then you can boot from this CD to repair windows for you, select restore backup image option and have your portable hard drive connected when you are recovering.

  Windows will look for the image on your drive hard laptop usb and restore.

  You can keep the image for the new installation, that you just did, or you can keep up to date and create a new image whenever you want.

  Just know that Windows will overwrite any previous system image, you created on this portable hard drive for the PC.

• Should I order initial recovery disks or upgrade to windows 7 discs?

  I have a HP Pavilion p6116f Desktop 64 bit Vista operating system updated and original upgraded to Windows 7, my drive crashed so I'm looking for the recovery disc.  Should I order initial recovery disks or upgrade to windows 7 discs?

  Harddrivealert, welcome to the forum.

  If you use original recovery disks it will restore the computer to its orignal configuration, including Vista.  You can't get recovery for the computer disks that include Win 7.  You will need to purchase a full copy of Windows.  You need to make sure that you can find all the drivers for Win 7.

  If your problem is solved, please click "accept as a Solution.

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.

• the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

  the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

  You n "t do it this way.

  You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

  If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  The process is simple:

  1. Install the software on your laptop for cloning
  2. RTFM (do not skip this step)
  3. Install the new drive in the external case
  4. Connect new player to the computer
  5. Clone original disc on new drive
  6. Stop
  7. Unplug the external computer case
  8. Exchange records (original for external disk) and the new laptop drive
  9. Reboot and enjoy your new drive.

  When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.