Pavilion HPE H8 - 1280T: map of Radion HD7770 video does not work in my Pavilion HPE H8 - 1280T

Similar Questions

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• BlackBerry GPS App Z30 maps does not work without wifi

  Hi there maps GPS app for BB does not work without wifi?

  Very well. Good. Wanted to make sure that you guessed it sorted.

• HP pavilian hpe h8-1205: my gforce 740 graphics card does not work in my HP Pavilion HPE h8-1205

  My 740 gforce graphics card does not work in my HP Pavilion HPE h8-1205, please help

  Supaman4040, welcome to the forum.

  I think that your problem is related to the BIOS.  The 700 series video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI in its motherboards up to mid-October 2012.  Your computer was released January 25, 2012.  You must contact the card manufacturer to see if they have a VBIOS update which will allow the card to work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• O2 iPhone 5 s phone line does not work with my map of Cyprus turkcell

  O2 iPhone 5 s phone line does not work with my map of Cyprus turkcell

  Yalcin davrandi wrote:

  O2 iPhone 5 s phone line does not work with my map of Cyprus turkcell

  OK, if the phone has been implemented using the o2 network and you want to use it with another carrier, you need to get o2 to unlock your phone.

• Pavilion g6 2307el: LEGACY BOOT SELECTION does not WORK

  Hi, first sorry for my bad English , I have a big problem...

  4 days ago, that I decided to install a new os on my pc (pavilion g6 2307el).

  I installed win 7 64 bit, and to do this, I enabled the legacy boot.

  now, I have some problems with some drivers and for this reason I want to change my os originally win 8 64-bit.

  I have the original cd of victory CV 8 (when I installed win 7 has deleted everything on my pc; recovery partition ecc..) but it does not work... Infact when the legacy box is turned on and I press the f9 key I see 2 option. boot to the efi file or boot from the hard drive (I can't see cd boot or boot usb or other) and when I put inherited boot off the system tell me that it isn't any os on my pc, and in this case when I Press f9 I don't see anything...

  Please, I want to return my windows 8...

  can someone help me?

  Hi @pavilion9512

  Thank you for your request! No worries for tyour not English, also long as understand us each other, that we are very well.

  I understand that a few days ago, you wanted to downgrade to Windows 7, but after doing if some drivers were not available.

  Now, you want to perform a recovery from the disk that you created but are unable to get the option to boot to the optical drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order which will facilitate this process.

  Good luck!

• My HP Pavilion g6 fan does not work.

  I bought a HP Pavilion g6 2230tx a few months back and its cooling fan has stopped working.
  It was working fine, but the problem started when I played Euro Truck Simulator 2 full settings. The cooling fan has been throwing a large amount of heat and the fan was moving quickly, but I continued to play. Later that day, when I turned on my laptop, it showed an error which was: "the system has detected that a cooling fan does not work correctly and continued operation can cause damage.
  Fan system (90 b)'.
  Then I turns off after 15 seconds.
  My laptop is under warranty until 2016-06-16 [YYYY-MM-DD] and the Security category is "guarantee of the factory." {Deleted personal information} & product number is C9L64PA #ACJ. Now my question is that how much HP will take to repair or replace my laptop fan. Will it be free? ;-)
  And I live in India.
  Thanks in advance
  Aniket Chauhan

  Dear Hüffer
  I tried what you say except clean it with compressed air and a paperclip. I'm going to send my laptop for repair and now I hope they'll work again.
  Concerning
  Aniket Chauhan

• Laptop Pavilion dm1 4010us and beats audio Panel does not work.

  I have a pavilion dm1 laptop 4010us, running windows 7 64 bit and beats audio Panel does not work.  I click Start, Panel, Sound and the Beats Audio Control Panel icon is there, but nothing happens when I click on it, so I can't change my audio settings.  Help, please

  Hello

  Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  http://support.HP.com/us-en/document/c01868333

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Pavilion 6630f: onboard video does not when network card installed

  I have a pavilion p6630f. I got a computer for said NIC 4 network card. Now, this motherboard is not a x 4 slot for the card, but it has a x 16 slot. I put the primary onboard graphics, but it will not yet properly start with this network adapter. No idea why? Am I missing a setting or a BIOS update?

  Hi there @tttomdemaria
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand you are trying to put a NETWORK PCI x 4 in x 16 PCI slot card, but the video does not.

  Please see HP and Compaq Desktop PCs - features card mother MS-7613 (Iona-GL8E)

  • A card PCI Express x 16 slot (for the graphics card support)

• Windows 8.1 installed on my HP Pavilion g7 & Player DVD does not work

  Hi all, I installed Windows 8.1 on my HP Pavilion g7 and now my DVD player does not work for some reason, ideas? I tried troubleshooting and it detects that there is a problem with the USB - IF USB Host Controller xHCI driverfor.

  THX,

  GSlice

  Hello:

  I would try each of the steps in resolution 2, 3, 4 and 5 on the link below.

  One of them can work.

  http://support.Microsoft.com/kb/314060

• HP pavilion dv9925nr sound does not work help please

  Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic

  Hello:

  Then I recommend that you follow the instructions in the guide to the link I posted above.

  After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:

  Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

  Pilot modded by silver here

  Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
  Not to connect, install from a list or specific location,
  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when he complains, Reboot.

  If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.

  Paul

• HP pavilion dv6 notebook (my dvd burner does not work

  I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

  I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

  need some advice.

  under Device Manager.  CD-ROM/DVD-rom readers

  HP cddvdwsn-208bb

  "device usb HP dvd writer 940D thank you billy'g"

  Hello

  Try please run now from the following link:
  
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Kind regards.

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• Pavilion g6: HP support assistant does not work

  Hello

  I use HP Pavilion 2301ax with windows installed on it 8.1 g6. I tried to run the hp support assistant, but he did not run.

  The program opens, but it remains empty. It shows nothing on it, only hp support assistant is written on the top.

  After that I closed the program, a message automatically "Hp support assistant does not work. Windows is to find a

  solution for it. "Then the message disappears. Well I look forward to the it.

  Hello

  You upgrade the machine to 8.1?  You need a newer version:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-135715-1

  Kind regards.