Pavilion p6-2340ea: upgrade PSU 500W on the p6-2340ea

I bought a Zotac GeForce GTX750Ti single fan 2GB graphics card that takes its power directly from its location on the motherboard... While I was told it will work OK on my existing 300W power supply I think about buying a PSU 500W in replacement, just to be on the safe side.

The PSU I have in mind is the: -.

SUMVISION PC POWER SUPPLY UNIT QUIET / SILENT POWER SUPPLY ATX 500W WITH SATA

500 watts
4 x SATA connectors
Motherboard connector: 1 x 4-pin
20 + 4 pin, connector ~ suitable for motherboards 20 to 24 pin
1 x 4-pin Floppy Drive
1 x Molex connector (for IDE drives)
Running time ~ 115 v AC operation 230 Vac
Model ~ X 3 power
Input AC 230V, 50-60 Hz
CISPR22 and FCC part 15 class B complies
In accordance with RoHS

My question is... a) not would be a good choice... and b) is it compatible with my system

Your comments and advice of experts wouild be appreciated.

A. No. I doubt he can even offer 200W safely and with a terrible efficiency at this. Same thing with Logisys Athena Power and other cheap brands. I suggest an EVGA 500 b unit because it is much safer and can actually provide its rated power.

B. Yes, it would work, if it does not blow up your PC by.

EVGA 500B; http://www.Newegg.com/product/product.aspx?item=N82E16817438012

Tags: HP Desktops

Similar Questions

  • Pavilion 17-g127ds: upgrade of processor and the graphics card Intel

    Hello. I was wondering if I could update the processor and graphics card in the HP Pavilion g127ds 17. It has an Intel Pentium N3700 (1.6 GHz) processor. I really want to know if I could pass this processor to something better. Also, if I can improve the Intel HD Graphics, it would be good as well.

    Hello

    Unfortunately NO, you can not upgarde to better CPU or GPU because N3700 Pentium processor and Intel HD graphics card equipped motherboard. If you want to update, you must purchase a new motherborad which is = to buy the new machine.

    Kind regards

       
  • Pavilion 15-n011tu: upgrade of ram under the flag 15 - n011tu

    I want to know how many slots is there in my machine... what maximum ram can I put into these slots...

    quick response

    Thanks for the reply but when I scan my material in line with crucial.com what were saying that 4 GB installed in 1slot and other is empty

    crucial.com results:

    http://www.crucial.com/USA/en/scanview/6F394AF131D926C3

  • upgrade PSU on HP Pavilion p6210f

    Hello, I'm looking to upgrade the stock PSU 300W in my HP Pavilion p6210f at least a 500W unit to take full advantage of an ATI Radeon x 1950 Pro, I have and possibly upgrade the video card at some point if necessary. I have read posts here and also looking for advice and at least understand that I need a PSU that adapts in the mother microATX case I. A few posts had links to available through newegg power supplies, but they all seem to be out of stock, probably because of my late desire to upgrade. Any recommendations would be much appreciated...

    Thank you.

    Hello

    This Corsair CX500should work pretty well. $40 after rebate.

    This Corsair CX600is an excellent choice.  $60 after rebate.

    The Corsair PSUs are the correct physical size for your PC.

    ' HP ' how-to ' articles should be useful.

  • Pavilion p6120sc: Vista to Windows 7 upgrade: how to find the necessary drivers, etc.

    Cheap HP Experts, the Vista operating system in my Pavilion p6120sc must be upgraded to Windows 7. The compatibility test of Microsoft said that the current driver for my NVIDIA nForce 10/100 Mbps Ethernet is not valid in Windows 7. Therefore, I was advised to download the latest driver for this device in advance; but its installation should only be performed after the installation of Windows 7.

    Problem 1: what is the right driver for NVIDIA nForce 10/100 Mbps Ethernet (i.e., valid in Windows 7), and where can I download safely to (without viruses etc.)?  -J' did an extensive search on Google but couldn't find an answer I could understand.

    Problem 2: The compatibility test also advised me to Uninstall Hardvarudiagnostikverktyg version 5.1.5144.16 (PC-Doctor, Inc.) before upgrading the computer to Windows 7. However, I couldn't find such a program in my PC! Therefore, How can I uninstall it properly? (Is this program might somehow hidden in the HP service package that performs the Test of full operation of my PC once a month? Moreover, would the HP package function test no more if this particular program have been eliminated?)

    You are the very welcome.

    You must install this driver before chipset update to W7, if you do an upgrade "in place", because the driver is good for W7 and Vista.

    If you make an own (custom) upgrade (not to keep all programs, files or settings), then you must install this driver after you upgrade to W7.

    All this driver will do is update the drivers for the motherboard and ethernet (the devices listed in the driver file page).

    Driver Ethernet (v73.14 +) tools for network management (v73.16) "Sedona" SATA IDE Driver (v11.1.0.33) WHQL SATA RAID Driver (v11.1.0.33) WHQL RAIDTOOL Application (v11.1.0.30) pilot SMBUS (v4.74) WHQL SMU (v1.71) driver driver WHQL of GPU (v190.38) Physx (v9.09.0428) WHQL Away Mode Driver (v6.0.6000.114) WHQL Installer (v7.57) WHQL.

    It shouldn't cause any device to stop working.

  • HP pavilion p6-2469ea: upgrade help

    Hi, I currently plan on upgrading my hp pavilion p6-2469ea to be able to run more demanding games upstairs, as the ARK: survival has evolved and I have no experience with computers I'm stuck help then about what it needs to be updated and some recommendations would be much appreciated. Just to note that I have already updated the 8 GB ram.

    @TomM123, welcome to the forum.

    Here are the system requirements for ARK: survival has evolved:

    http://www.game-debate.com/games/index.php?g_id=23214 & Game = Ark: % 20Survival % 20Evolved

    It is clear from your processor and memory are fine.  I suggest that you upgrade to at least a 750Ti GTXvideo card.  Read the reviews to see what users have to say about it.

    You may need to upgrade the power supply (PSU), also.  The EVGA 750Ti said it will work with a power supply with 300W.  However, most of the members have reported needing at least 400W.  If you replace the power supply, I love the Corsair products.  A modular power supply is best for medium-sized business.  It allows you to use only the cables than absolutely necessary.  I recommend at least 500W.  This will give you a high power for the maximum level of use.

    A final element that will make a major difference is an SSD.  I love Samsung SSD.  They seem to move better without the need to change the BIOS settings.  The only need is to make sure that the BIOS is set to AHCI.  The DSS will not work if it is not setup in this way.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • HP Pavilion 23-b026in: upgrade Windows 10

    I had upgraded my HP Pavilion 23-b026in to Win 8.1 to win 10 2 months ago.

    Everything worked perfectly for about 3 weeks.

    But 3 weeks after the upgrade, the PC wouldn't start (black screen).

    The motherboard has been changed by a HP technician under warranty.

    The PC was then downgraded to Win 8 by the attending technician.

    He said that I did not upgrade to Win 10 & the failure of the motherboard was cause of upgrade to Win 10 (driver incompatible).

    According to me, it was just a coincidence that the motherboard has not 3 weeks after the upgrade.

    Could someone Pl. advise if above is true?

    At any fact an upgrade of this office while a PC (HP Pavilion 23-b026in)?

    Thank you

    Reported motherboards being damaged as a result of the Win10 upgrade - but all the ones I saw were really old, entry level Win7 machines, which NEVER should have been upgraded, and they ran so hot under Win10 that heat damaged chips on the motherboard.

    A Win8.1 machine will be a lot of new material and is unlikely to cause problems of material of an Win10 upgrade.

    As for drivers, HP technology was right regarding there is not Win10 driver for your device, but the drivers are software (and in some cases, firmware) and the MOST that would happen of incompatible drivers, it's that some functions of the machine would not work right - as the brightness doesn't work do not , or bluetooth not working not not or the WiFi doesn't work do not, etc..

    Most likely, what happened in YOUR case, is due to the insistence of MS that, in Win10, customers have NO CHOICE about what updates are applied, including the pilots, and when those are applied.  Win10 forums are full of messages from people like you which machines worked fine, for a while and then suddenly quit working properly - entirely due to Win1'0 replacing a working driver by an update of pilot who did NOT.

    Which has fixed SOME of these situations is to disable the Win10 driver updates. It is not easy to do (as MS does NOT want to do you) this list is possible.  In cases where this has worked, the people and found an older driver, who (to get their working device) installed then disabled, updates.

  • HP Pavilion P 6235uk: upgrade hard drive

    Hi, I have a HP Pavilion P 6235uk desktop PC.

    The hard drive is 640 GB.

    I would like to replace it with a hard drive to Go 1000 or 2000. The hard drive interface is Serial ATA 11. Mewmory type is DDR3-SDRAM. It is 8 GB. Just wondering if anyone knows what hard drive I can use and 1000 or even 2000 GB.

    Thank you

    laurencewithau

    Hello @laurencewithau,

    I understand that you are looking to upgrade the hard drive on your desktop computer, and I'd be happy to help you in this case!

    According to the Specifications of the product, you can update your system with any size of drive hard as much as it meets the following requirements:

    1. It has a SATA port connection
    2. The male power connector corresponds to the insertion on the replacement hard drive
    3. It is the same physical size as the previous hard disk. If it is less, you can always purchase a mounting bracket on the space difference.

    For more information about upgrading the hard drive, please take a look at this resource on installing or replacing a hard drive.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • HP pavilion dv7 1260us: upgrade memory and processor for hp pavilion dv7 1260us

    I was wondering if possible to upgrade my memory and processor... hp pavilion dv7 1260us?

    Here are the specs:

    Plug

    You have an AMD Turion RM-74 processor and 4 GB of RAM. The RAM is DDR2 and it may take 8 GB of DDR2, but that the memory of any reputable vendor is crazy expensive, like $150 ++ for 2 x 4 gig modules.

    Here is the Service Manual:

    Manual

    The top of the page compatible processor is an AMD Turion™ Ultra Dual-Core 35W ZM-86 2.40 GHz with 2 MB of L2 cache

    If you want to go from 2.2 ghz to 1 meg to 2.4 ghz with 2 MB of L2 cache L2 cache, may be a treatment of 20% energy improvement. Not enough, IMO, to justify the difficulty because it is still not in the ballpark of machines of today.

    You can buy the processor from a dealer renowned for $15 with free shipping. That should tell you what the demand is for her. Basically obsolete.

    http://www.eBay.com/ITM/AMD-Turion-X2-ultra-dual-core-Zm-86-2-4GHz-dual-core-Laptop-CPU-TMZM86DAM23GG-/401122492329?hash=item5d64c37fa9:g:KMsAAOSwZetXO2Wh

    I replaced motherboards in several series dv7-1000, and it is one of the harder to take apart laptops. Many cables in strange tablecloth and Remora in all directions.

    We are ready to help in any way possible with the upgrade, but in this case probably the best advice that I can give you is "don't".

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP Pavilion DV6-6165tx upgrade advice needed

    Hi, I bought a HP Pavilion Dv6-6165tx 2 years ago. The warranty has expired and I need to upgrade my laptop to keep up with the generations Game.I have following questions: -.

    1. My current RAM's single chip 4 GB DDR3 at 1333 MHz. What RAM chip I could buy for use with this one on another site. I have shorlisted of it

      Corsair CMV4GX3M1A1333C9: http://www.flipkart.com/corsair-vengeance-ddr3-4-gb-1-x-gb-pc-ram-cmz4gx3m1a1600c9/p/itmd2rypbx4eeha...
    2. 1333 Mhz being low enough to me, I can replace on board RAM with a 1600 Mhz, one? I selected this one: -.

      Corsair CMZ8GX3M1A1600C10: http://www.flipkart.com/Corsair-vengeance-DDR3-8-GB-1-x-GB-PC-RAM-cmz8gx3m1a1600c10/p/itmd8cfmbufg3d...
    3. Can I put an integrated graphics card? Currently its Radeon HD 6770 M 2 GB of DDR5 memory. If so, could you suggest a good upgrade? Thank you very much for the help!

      Kind regards
      Mangat

    Indeed, I am of the India.

    First of all, I would recommend what I felt the better for OUR laptops. Mine is a DV6 6121tx with the config following-Core i7 2630QM at 2.00 GHz with TB up to 2.90 GHz

    12 GB DDR3 RAM

    256 GB SSD + 640 GB HDD (will tell you more info on my dual setup of HARD drive later.

    HD6770M 2 GB with DDR5 Mem

     

    So everything I post here, you can directly go and fix it.

     

    For my double HARD - SSD drive setup, here go it.

    1 video - http://https :// www.youtube.com/watch?v=KmUkk2gdoC8

    2.Caddy -http://www.ebay.in/itm/Universal-12mm-Laptop-Optical-Bay-Hard-Disk-SATA-to-SATA-12-7mm-HDD-Caddy-/321405307668?pt=IN_Laptop_Desktop_Accessories&hash=item4ad53fcb14&_uhb=1

    3.cable -http://www.ebay.in/itm/USB-to-Slimline-SATA-7-6-MicroSATA-converter-cable-/221439545145?pt=IN_Computer_Components&hash=item338ed34f39&_uhb=1

    4.SSD - GB to 256 GB Samsung 840 EVO (best value) or 840 Pro (expensive, but with the best possible performance). Buy SSD that from PrimeABGB - the best online store for SSDS.

    Just a few errors that I don't want to make you-

    1 put the SSD in Caddy and cable of optical drive on a HARD disk. Reason: your SSD will be connected to the Sata 6.0GBps port. You may think that you can directly put a SSD instead of HARD drive and put the HARD drive in the caddy, but HARD DRIVE could vibrate in caddy culminating in his death.

    2 carefully remove the ODD mounting plate and put it on the caddy. You get an extra façade with caddy. With cable, you can still use your DVD burner drive as external.

    For your RAM, anyone with a 1333 MHz will be. CASE latency for most of the brands are the same. Do not go for a 1600 MHz, as it will be a waste of money.

    I should also the total list of expenses involved in this upgrade-

    1 SSD EVO - Rs.11, 000

    2 SSD Caddy-Rs 750

    3.cable - Rs.650

    4.4 GB OF RAM-~ 2600

    Total - Rs.15000.

    Believe me, you will fall in love with your laptop again.

    Just a word of warning-reading on google how to make the best of the SSD. Its much different from your HARD drive and a lot of need to follow different practices. Also, I recommend for a 128 GB, as I personally have 185 GB free on SSD after winning 8 + all apps + 3 heavy games installed. So you can save any amount it.

    Good shopping

  • HP pavilion elite m9500y: upgrade suggestions please

    Hello

    I have a HP pavilion elite m9500y.

    Here is the link for the specification.

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01616194

    I want to update my pc because it became so slow these days.

    Please give me your suggestions for the upgrade, such as the change of memory cards or a graphics card, etc.

    Thank you

    Hello

    It is a machine for 8 years. Please note, new technology can come out every weeks or even days. You must update the motherboard, CPU, RAM, power supply, disk HARD and a few others and you won't get not the speed of the new machine to.

    I would give the option a miss and buy a new machine.

    Kind regards.

  • Pavilion G4-2127tx: upgrade of RAM Maximum for HP Pavilion G4-2127TX

    Hello!

    I just downloaded CPU - Z to verify my information system and found that 2 of my RAM slot is empty. Is this correct? And if there are 2 slots would it be possible to buy another for slot 2 and increase my RAM from 4 to 8G? Thank you very much

    Upgrade success with all the problems, you will need to purchase two modules compatible 4 GB guaranteed memory.

    The problem is that you must install the memory modules that are identical in every single respect.

    Otherwise, you are probably very disappointed when the laptop does not start in Windows.

    Purchase memory modules well known froma manufacturer of memory. (Kingston, Crucial, Corsair)

    Do a Google search as seen in the following link. You results wil be different that Google provides regional results for searches.

    https://www.Google.nl/search?q=HP+Pavilion+G4-2127TX+memory+upgrade&OQ=HP+Pavilion+G4-2127TX+memory+upgrade&AQS=chrome..69i57j69i64.4831j0j4&SourceID=chrome&es_sm=93&ie=UTF-8

  • a patch which apply OEM 12 c 12.1.0.4 - patch of PSU or of the boot

    Hi all

    Could you please help me understand - patch which apply in 12 c 12.1.0.4 OEM - PSU or Budle patch ?  By doc - id -

    which of the below mentioned patch to be applied in the OMS?

    1 > system Patch 12.1 .0.4.10 - Patch 20675595 (It is a fix Sytem that includes all the WHO-side plugin Bundles available this month and the SGC-side Plug-ins, published in previous months).

    or

    2 > for 12.1.0.4, this is the Patch: https://support.oracle.com/epmos/faces/BugDisplay?parent=DOCUMENT & sourceId = 1900943.1 & id = 20392036https://updates.oracle.com/ARULink/PatchDetails/process_form?parent=DOCUMENT & sourceId = 1900943.1 & aru = 20392036 & patch_password = & no_header = 020392036 (12.1.0.4.3 power supply).  Please refer to the Note. 1995267.1 . for the last available for Oracle Enterprise Manager Cloud patches PSU controls 12 c Release 4 (12.1.0.4).

    We recently upagraded our 12.1.0.2 in 12.1.0.4 OEM with software using update option during the upgrade, so none of the PSU are applied to the OEM. Now, we want to apply the latest patches to OEM that fixes all the bugs and bugs/titles.

    I thought that BP will include both PSU, but why say DOC - id - 1900943.1 - NOTE: we recommend that you always apply the most recent quarterly PSU.  For 12.1.0.4, this is the Patch: https://support.oracle.com/epmos/faces/BugDisplay?parent=DOCUMENT & sourceId = 1900943.1 & id = 20392036https://updates.oracle.com/ARULink/PatchDetails/process_form?parent=DOCUMENT & sourceId = 1900943.1 & aru = 20392036 & patch_password = & no_header = 020392036 (12.1.0.4.3 power supply).  Please refer to the Note. 1995267.1 . for the last available for Oracle Enterprise Manager Cloud patches PSU controls 12 c Release 4 (12.1.0.4). ??

    Help, please.

    Yes, they are mutually exclusive so you must apply the PSU & the patch Bundle/Plugin system to get the complete set of SGD fixed side.

  • Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications

    Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications & iTunes the correct ID is set but not in the settings/iCloud

    Is this a separate id, or you have successfully updated the primary e-mail address on the account? You can disconnect an account iCloud through settings > iCloud > Sign Out, and then log back from the other/updated id to update

    If you have updated the main email address: what to do when you have changed your Apple ID email address or password - Apple support

  • Can not start after the upgrade OTA (open from the Spain ZTE) v1.1

    Hello

    I got my ZTE Open (Spain) pretty well work very well with the official 1.0.1 upgrade of ZTE (for the Spain model). So today I got a new system update available (30 MB +) and proceed to download the upgrade.

    After a while, the phone has restarted and kept in the loading screen restart again and again. I did a soft reset tested, factory reset and did not work.

    Then, as I found that the update has been stored in the SD (updates/fota/update.zip), I tried to apply it again but got "error in /tmp/sideload/package.zip". This is my journal of recovery: http://dpaste.com/1420406/

    I tried also downgraded to v1.0.1 but I can't because he complains is not System v1.0.0.

    I hope someone can tell me a solution, I live in America South and bought this phone from Spain, so you have to return it will be not easy or quick.


Maybe you are looking for