Pavillion dv9000 wireless is no longer and the light remains orange

Similar Questions

• fan stays on too long and the battery level decreases rapidly: any problem identified?

  Fan stays on too long and the battery level decreases rapidly: all identified cause problem or possible?

  MacBook Air mid-2013

  OS 10.11.13

  Processor 1.7 GHz Intel Core i7

  8 GB of DDR3 memory at 1600 MHz

  Thank you, Paolo

  Hi Paskowski,

  Can you give us a little more information about your problem?  What applications or processes are you using when you encounter the problem with your fan and battery?  The activity monitor application can provide you with some basic information.

  Use the monitor activity on your Mac.

  The resources below provides general information on how optimize the battery life and troubleshoot the battery on your MacBook Air.

  On batteries for laptops Mac

  Take care

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Satellite P10 PSP10E shutdown and the light stays on

  Hello

  I'm having some problems with my old man (2004) Satellite P10 PSP10E-0SCM7-FR

  One day he simply closed (as if power, no BSOD) and the power and the led for WIFI and the CD/DVD button remains lit.

  Most of the time I can't activate it under as the power button is still on. (Power button, WIFI, and CD/DVD are on).

  I tried to remove the battery and unplug the computer for at least 30mm
  I tried to press the Start button for a period of time (one minute) then disconnect everyting (battery and power cord) at least 30 minutes before to turn it back on
  I have reinitialzed the computer using history CD provided with the computer
  I removed the radiator cleaned as well as the fan and then replace a new thermal grease
  I changed the memory

  Yet I still have the same problem, for some reason, the computer simply shutdown and the light stays on. Occasionally, the power light start, and I am able to restart the computer. But I'm unable to understand what makes the computer is shut down, or when that happens, what makes the power light turns off and make it possible to start the computer again.

  No idea what's going on?
  The Start button / stop and led market would be an error message?
  If so, what that means?

  Any help is very appreciated. Thank you!

  Damien

  lighting even when taking the battery and unpliging for a while (30mm in an hour)

  Hello

  Usually, books closed due to the high temperature and in this case, the unit must be disassembled and cleaned professionally, but it seems that you already have what I read in your post above.

  Probably its a motherboard problem.
  The RAM modules appear to be checked and is not RAM issue.
  So problem mobo is possible

• After 4.4 my Batt. / hour and the signal remained blue

  After the update to 4.4 KitKat on my Droid Maxx I noticed that my battery, signal and the time remained blue? I know the KitKat update was supposed to bring the white/gray color to the notifications/status bar. I saw another comment on that person. My update Nexus 7 removed the blue and update of bike G my kidnapped son to 4.4.2 blue also. Not a major problem but a question of aesthetics.

• the light remains on my HPPSC 1610 printer and told to stop. It does not start yet either.

  The light remains on my HPPSC 1610 printer and said "shutting down", but is not closed.

  Unable to get that it is reactivated.

  You should be contacting HP about this problem, but an easy way to start again is to unplug it, and then reinsert the plug.

• On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside. When on this subject that is supposed to be a white light showing that it is on. How can I fix it? It happened when I upgraded to Windows 7 from Vis

  On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside.  When on this subject that is supposed to be a white light showing that it is on.  How can I fix it?  It happened when I upgraded to Windows 7 from Vista.  Help, please?

  Windows Update has nothing to do with the upgrade of Windows. Try posting in one of these specific forums Win7:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  http://social.answers.Microsoft.com/forums/en-us/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Outlook express 6.0 may send, but receives an error, unidentified, and the message remains in the Outbox

  Outlook express 6.0 may send, but receives an error, unidentified, and the message remains in the Outbox

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Sync problems Xbox 360 wireless receiver for Windows and the controller (Windows XP, SP3)

  I'm having trouble connecting my controller to the wireless receiver. I use XP, Service Pack 3, 32-bit. I read dozens of help sites for help, but none has my same circumstances. The most common suggestion was to look at the driver for the receiver appears as a device not recognized. I checked the Device Manager and the receiver is recognized and does not appear as device not recognized. My controller does not appear in Device Manager as a new group named Microsoft Common Controller for Windows class, on Xbox 360 Controller for Windows. My controller syncs perfectly with my console, and functions very well also. I also downloaded the file Microsoft Xbox 360 accessories of the Microsoft hardware Web site, such as recommended by many establishments but do not know how file functions. A last help, my receiver is genuine and not fake with the XBCD holographic logo.

  Hello

  See the link to the Xbox support forums:

  http://www.Xbox.com/en-us/forums

• When I try to connect to my router wirelessly from my laptop and the room, he asks for my network key and I don't know what it is.

  my brother used to all our computer equipment set up and he died last year. Well when I moved and tried to get into my new place it will not allow me without a network/wpa key. I know that I am trying to connect to my router and not my neighbors because when I unplug it it's the only name that disappears from the list of wireless networks. How can I know what is the network key or even set up a new? I am a bit technologically with faculties weakened to get detailed instructions on how to help me would be appreciated, but any help would be great.

  I'm sorry for your loss. Since we do not know how your brother to set up the router, it would be better to start again just to make sure that your wireless network is secure. Reset the default router. This is usually done with the wired router (on) by pressing a small button on the back or the bottom of the router, now the button for about 30 seconds and then let go. You can find the manual on the router mftr's Web site. your router if you need it.

  Once you have reset the router to default, set up correctly:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• 1280 x 1024 resolution is no longer and the option

  original title: resolution problem

  My computer gives me is no longer the option "1280 x 1024" resolution, how do I get it back?  Highest available is '1024 x 768 '.

  Obtained from the site of the factory and the download update video card drivers.