PB: Photo wall Node.JS + Docs Socket.IO Install?

Similar Questions

• Photo wall option is available on the new Apple TV?

  I understand that they were not there when you first launch.

  Not sure what you mean by "photo wall", but yes, there is a function of pictures in the new Apple TV: http://help.apple.com/appletv/#/atvb399f3391

• Rec'd dropbox to the message with a photo of the friend doc. Such notice, thought has been expanding doc, immediately went to the zip file downloads. Open the folder several files, open 1, did not open the funny code file. I'm ok, anyone who sent hacked.

  Received email claimed friend which contained dropbox. In dropbox was the photo of the small document and note to friend. (I wasn't familiar with dropbox). The document had seen listed by it. I clicked on see thinking I was enlarging document to read what it was. A folder of zip file immediately went to the download. I opened the case and he had several files listed, suspicious code. One who does not I opened. The person called and they said that their e-mail had been hacked. Someone had mentioned to them that it would be Zeus. Although I have downloaded zip file and open a folder which looked ok, and I did not open the file with the code of suspicion. I agree with you?

  I agree with you?

  Yes. Just delete the files and the message.

• PHOTO COPY OF WORD DOC

  photo copy of word document

  What version of Word?  And Photos?

  Older versions of Word are not support dragging parts and condensation or ice and paste pictures. And the older versions are not Photos in the photo browser.

  As a une solution solution workaround in Photos, select the photo and use the 'Export son' command to save a copy in a folder ron office.   Then drag the photo from this folder to the Word document.

• How can I access photos stored in the iPhoto library WITHOUT installing the Photos?

  OS X Yosemite 10.10.5

  I want to access the photos that are currently stored in an old iPhoto library WITHOUT installation and launch of PHOTOS (or iPhoto).  Is there a work around?

  Also running Lightroom CC

  Use of course - 9.6.1 iPhoto or Aperture 3.6

  LN

• Photos now launching on its own after installed EC

  I finally took the plunge and installed at El Capitan.  Among other oddities whenever I plug an iDevice on my iMac Photos lance now.  There no option in the preferences of pictures Do not Sync.  How to keep the pictures to launch?  Back to Yosemite?

  DesertRatR,

  http://osxdaily.com/2015/05/31/stop-photos-opening-automatically-Mac-OS-x/ explains how to find the elusive preference.

  

• Purchased subscription Photo - wait for a long time to install...

  Bought Photo subscription - tell me 'the command is processed' and I have to wait a few Minutes. It's done 45 Minutes ago! Is this normal?

  I read that it will take as much as 24 hours for a purchase to show your Adobe account

• The computer that I'm working on now is obsolete... I bought a new one with 2 terabytes of memory external. How can I transfer all my photos on my new external drive and install cloud creative adobe on my new computer?

  The computer that I'm working on now is obsolete... I bought a new one and also bought an external hard drive of 2 terabytes. How can I transfer all my photos for 2 terabyte external and also transfermy subscription to my new computer?

  Hello

  You can refer to link below for download cloud Creative: -.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  
  

  Hope this helps!
  

• Failed to read the docs epub, cannot install the epub reader (not compatible with Firefox 8.0.1)?

  I downloaded a Smashwords.com manuscript to EPUB. This is my manuscript, and I must be able to read in this format. However, it is incomprehensible. I tried to install the epub 1.4.1.0 drive, but got the message that it is not compatible with Firefox 8.0.1. I also tried to install digital Adobe and Adobe 7.0, but Firefox is not letting me. I need to be able to read this epub document! Thank you.

  Please install this Add-on . This should dispel the compatibility issues.

• Was able to do the system restore to get the programs & icons back but lost all my photos and my docs HELP!

  My blocked computer randomly getting error code Catalyst Control Center host application has encountered a problem then all icons and programs have disappeared was able to restore the system to work and all the programs and icons and background photo returmed but my docs and photos files are gone Please HELP!

  Just an idea that might be worth a try...

  Is it possible that your files are still there but have
  become hidden?

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  Let us know if the files reappear.

• Problem with Iphoto/Photos

  Hey there!

  I've updated my mac from the software for OS X Yosemite 10.10 10.6.8 and can't now open Iphoto or upgrading the application.

  Photos of the app has not been installed with the upgrade, what can I do to find/open all the pictures I had on my computer?

  Thank you in advance for your help!

  What version of Yosemite have you?   Photos for Mac will be installed with MacOS X 10.10.3 or later.  If missing pictures, look at the tab updates on the App Store and update at least MacOS X better 10.10.3, to 10.10.5 to get all Yosemite bug patches. Then, you will be able to use Photos for Mac.

  To be able to use iPhoto, update iPhoto 9.6.1. However, it will be possible, if you use iPhoto 9.x.x.

  9.6.1 iPhoto works well with Yosemite and El Capitan. See tip for user to Barney, if you did not yet Update 9.6.1 iPhoto: https://discussions.apple.com/docs/DOC-8431

• WRT160N, auto-negotiation has failed at 100 Mbps, can wall jack be the cause?

  Hello

  Can someone please help me with may be a simple problem for you, but it starts to drive me crazy. Sorry in advance for the long post.

  WRT160N installed in the basement, linking (cable) 3 desktops and 2 laptops (wireless). When connecting by wire, some computers have troubles in autonegotiation speed, always end upward with connection failed. Force the speed of 10 Mbit/s full duplex solves the problem.

  Curiously, both computers have no problem to 100 Mbps Full Duplex auto-negotiation (HP nc8430 laptop with 5 years and the Broadcom NetXTreme Gigbyte old IBM ThinkCentre M50 8189-Tower network chip, I do not know the exact network chip, but I think that until the Gigabit). Less than 1 year of office by using a Committee of Asus P5N7A-VM with the integrated Realtek, also Gigabit network chip, still FAILED to negotiate at 100 Mbps. The wall plate has 4 Sockets. The question above is the same regardless of any plug used.

  After several attempts, I think I've isolated the cause to the wall outlet. There are about 6 metres of cable (~ 20 ft) between the router and the wall outlet. The computers connect to the wall using a cable of 2 meters (~ 7 ft). Go through the wall outlets, I pulled a 10 meter cable (~ 30 ft) connecting the router directly to the computer, then the computer is not always to 100 Mbps now could connect without any problems. So, this seems to indicate that the wall socket has altered the quality of the signal.

  The cables (between the router and the wall) are straight with T568B wiring (http://en.wikipedia.org/wiki/T568A/B#Wiring) the sockets are CAT5 RJ45 Keystone Jack free tool (http://www.amazon.com/CAT5-RJ45-Keystone-Jack-Black/dp/B000BSN7RO)

  So here are my questions:

  Q1. A wall outlet would cause a loss of significant signal or alteration?

  Q2. If the wall outlet is the cause of the loss of signal quality, how is it some computers have no trouble to autonegotiation to 100 Mbps Full Duplex and also when forced to 10 Mbps FD, all network problems disappear?

  Q3. And the most important question: can you please provide a solution?

  Thank you very much in advance for any help.

  Hello

  Follow up and FINAL solution to close this thread. The cause was the wall outlet. All sockets are of the type version tool-less Keystone Cat5e. All the exihit speed negotiation issue and can be used at 10 Mbit/s full duplex.

  I could borrow a punchdown tool and tried a new plug. This time, I tried Keystone Cat6 jack _WITH_ tool. Can be overkilled my cable is Cat5 only. But I don't want to take any risks because the price difference is negligible between Cat5e and Cat6 decision. The new Jack is working perfectly. The AutoDetect computer easily at 100 Mbit/s/s. The fix is so obvious, as soon as I replace threaded plug by a Jack of tool WITH the speed issue disappeared. I have connect / disconnect several times, even restarted the computer to ensure that the new Jack is working OK

  Although I'm not a guru in network cabling. But I'm not computer (using Windows & Linux) and I'm quite a handyman. I can't possibly screw up Assembly of ALL taken without tool, I've had. And the misconfiguration of the network in the operationg system is out of the question. Added to this fact that the new tool WITH jack is much easier to mount and all prectly work on the first attempt. I would say in conclusion that WITHOUT TOOL, CLAMP in Ethernet JACKS are UNSTABLE. At least that's my experience.

  It's pretty frustrating, that Jack is the last place I guess as a cause of a wiring problem. I changed to RJ-45 Sockets, wiring maps network and same router. All this has not solved until one day I discovered by chance that the cause was the wall outlet. (New computer loan with Ubuntu, I forgot to reduce the network speed to 10 Mb and directly connected to the switch without going through the wall socket and discovered that the computer can connect immediately to 100 MB).

  Hope this might help someone else.

• 10g R2 no RAC-database unique Instance to upgrade to 11g R2-2 node RAC database

  Hi all

  I have a requirement for my client.

  We have a three databases with replication between them activated by MV & MV connects to the 10 g R2 database.

  This must be upgraded to Database 11g R2 with a 2 RAC node.

  Please tell us how to get started and go.

  Also please notify once upgraded to database 11g R2, how replication can be achieved.

  Thank you

  Vijayaraghavan.K

  > We have to first upgrade to 11 g R2 Instance unique and then move on RAC - node 2

  You must install the grid Infrastructure for Cluster and RAC database software in the new cluster.

  Then upgrade the database as a single instance database.

  Then, convert it to the RAC

  See http://docs.oracle.com/cd/E11882_01/rac.112/e17264/install_rac.htm#TDPRC185 for the conversion of the measures.

  Hemant K Collette

• you see is not the option of selection of nodes in the EBS installation

  I installed EBS12 on OEL6 but I don't see any window (which shows the book) option to choose if I want to install the database on a separate node.
  what I'm missing here?
  
  Thank you

  Sami wrote:
  I downloaded Google Reader... can see you?

  https://docs.Google.com/file/d/0B7PJJJ5WokkMS1UyVEN1VnN3ajA/edit?USP=sharing

  I see the installation window of database node in node database of Page 6 - install Oracle Applications-

  Thank you
  Hussein

• Upgrade to a CCR node

  Hello
  
  We intend to migrate Oracle 11.2 alone with ASM to a node RAC with ASM. I read a lot of documentation, but haven't found any resources on how to do it again. Then I would ask if anyone has good documents or advice on how to upgrade?
  
  The plan is to use the existing server (the one with the single instance and ASM) and of course a new server and prepare these for a cluster, and then migrate the database. Is - it still possible because AFAIK ASM already uses a non-clustered of the crs daemon version?
  
  Thanks for your help!
  
  Best regards

  >
  The plan is to use the existing server (the one with the single instance and ASM) and of course a new server and prepare these for a cluster, and then migrate the database. Is - it still possible because AFAIK ASM already uses a non-clustered of the crs daemon version?
  >

  Maybe you have a look at http://download.oracle.com/docs/cd/E11882_01/install.112/e17212/rem_orcl.htm#CBHEEJAA

  I think that you need to uninstall GI... Please correct me if I'm wrong

  There is also a special forum on otn.

  HTH,

  -wiZ