10g R2 no RAC-database unique Instance to upgrade to 11g R2-2 node RAC database

Similar Questions

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...

• formulated differently: 10G OCP can upgrade to 11G OCP (1z0-050 or 1z0-034) and be always active, correct?

  The sentence differently: 10G OCP can upgrade to 11G OCP (1z0-050 or 1z0-034) and be always active, correct?

  They should NOT put just to 12 c, correct.

  Someone at work took the Oracle class in Chicago: Oracle 11 g new Featurers for administrators.

  They wanted to ensure that they would NOT have to take another training class Oracle.

  Thank you Roger

  The sentence differently: 10G OCP can upgrade to 11G OCP (1z0-050 or 1z0-034) and be always active, correct?

  They should NOT put just to 12 c, correct.

  Fix.  There is not currently a scheduled date for individuals with 11g as their highest certification of need to obtain a new certification.  If Oracle does not change their policy (unlikely), it will be a date in the future where it is practiced.  However, the upgrade to 11g will prolong the active life of their powers of Oracle by (I guess here) 2-3 years.

  Someone at work took the Oracle class in Chicago: Oracle 11 g new Featurers for administrators.

  They wanted to ensure that they would NOT have to take another training class Oracle.

  I don't know what you mean by "shall take".  Once you have OCP, Oracle requires no additional training for practical requirement - even if the certifications become inactive and must be reactivated. I guess you mean that he took the class because he wanted to prepare 1Z0 - 050. Based on this issue, he now wonders if he needed to go directly to 1Z0 - 060 rather (and therefore would like to take the new features in preparation for this test review 12 c).

• Creating instances of the class customized for XML nodes

  Hi guys,.
  
  I'm trying to load an external XML document in my application and create an instance of a custom class for each node in the XML file based on the value of some of their elements. Instances created later will end by in a DataGrid by the way. The problem I have is there seems to be several ways to make small parts of it and I have no idea how do them all gel. Initially, I use HTTPService to load the XML file, but I've seen people just use a XML object. Then, after that, I put the XML loaded to an ArrayCollection collection initially, but others used XMLList or XMLListCollection. I have no idea of what is the best way to do it.
  
  Finally, when I created all of these instances by looping through XML and their creation how I'll make them bindable to the DataGrid? I guess I'll have to group together them somehow...
  
  Any help would be greatly appreciated. Thank you

  Create a class customized for your 'point' of dataGrid dataProvider objects
  * Use HttpService to get the XML code.
  * use an e4x expression for the child nodes of the xml in an XMLList: myXML.children () or myXML.myNodes;
  * use a for loop on the XMLList
  * inside of the loop, create a new instance of the custom class
  * Of the [i] myXMLList, obtain all necessary attribute values and assign them to the appropriate properties in the instance of the custom class.
  * always inside the loop, use myArrayCollection.addItem (mycustomClass) to add the element to the collection of the dataProvider ArrayCollection.

  Tracy

• CloudControl 12 c: when you add unique instances of cluster-database are missing

  Hello
  I'e installed agent 12 c on every single host of our CARS. When you add a database to CloudControl 12 c just the RAC instance gets discovered--but not instances of single database on each host.
  For this reason when target by clicking-> databases I just see the cluster-database - but not every single instance of the database.
  
  It's a totally different behavior from another data base RAC.
  
  Any help will be appreciated
  
  Rgds
  JH

  VivaLaVida

  you attempt to add the target manually in CC12c? (in the Setup)

• Oracle 10g of MSSQL 2005 database link

  Hello

  We are configuration link database to oracle 10g of mssql 2005

  Thanks to the heterogeneous connectivity. We get the following error when testing database link.

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  ORA-28541: error in the HS on line 1 init file.

  ORA-02063: preceding 2 lines of < SID >

  28500 00000 - "connection between ORACLE and a non-Oracle system has sent this message:

  * Cause: The cause is explained in the forwarded message.

  * Action: See documentation for the non-Oracle of the transmission system

  Message.

  Error on line: column 4:19

  Can someone guide correct configeration of Hetrogeneous Service and why the error arises.

  Thank you

  Basu,

  Dg4ODBC gateway can be used with the 10.2.0.5 database. It is certified and no additional license is required for the database to ODBC gateway - the license is included in the license database (even when the Oracle database is still version 10.2) AND you can also install Dg4ODBC on another machine, then the Oracle database. There is no need to have Dg4ODBC installed on the same computer as the Oracle database.

  -When you install DG4ODBC on the same machine as your Oracle 10.2 database, then install in its own, separate OH - otherwise you will corrupt your existing installation of the database.

  -Klaus

  Post edited by: kgronau

• 10g Grid Control with database 11g

  Hello
  
  According to the name of the topic, it is possible to manage a database 11g with 10g grid control? The situation is that 10g grid is up and running and we have several new 11g databases, can they be added?
  
  After that, when I try to install an agent from the web interface, I'm invited only with the Linux platform, however the 11g database is under Windows, how can this be resolved? (Enterprise Manager Grid Control works on linux)
  
  Thank you very much for the input.

  Mika wrote:
  Hello

  According to the name of the topic, it is possible to manage a database 11g with 10g grid control? The situation is that 10g grid is up and running and we have several new 11g databases, can they be added?

  Yes, it can. But better to use the Agent and the Group of OEM Grid Control 10.2.0.5 patch.
  Learn more Oracle Enterprise Manager Grid Control Certification Checker ID 412431.1*.

  After that, when I try to install an agent from the web interface, I'm invited only with the Linux platform, however the 11g database is under Windows, how can this be resolved?

  Not sure I understand how you install the agent, could you clarify? It comes from the OEM Grid COntrol? Have you downloaded the Agent for Windows?

  Nicolas.

  Note added MOS
  Published by: 399642 on November 30, 2010 11:51

• How to convert CAR unique instance DB DB

  Hello
  
  How to convert a RAC multi instances of node-to-node single with EBS 11i
  
  DB: 10.2.0.5
  
  Please let me know as reference documents.

  see the links: it will help you.
  http://oracleinstance.blogspot.com/2009/12/convert-RAC-instance-to-single-instance.html

• 10g dataguard - physical intelligence database

  Hi guys,.
  
  Db1 < primary - > Production
  DB2 < knows standby - > DR
  
  I need to start my DB2 in DR segment for testing.
  If I make below, will this affect my Production DB? I need it to be in place and works as well.
  
  
  DR:
  recover managed standby database cancel;
  stop immediately;
  startup nomount;
  ALTER database base_de_donnees eve of Mount;
  recover database until cancel; pending
  ALTER database activate standby database;
  
  Thank you

  dbaing wrote:

  My question is, will it decrease my production db if I activate the database pending?

  Thank you

  No, it won't lower db output by activating the standby mode

  It may be useful

  See you soon

• XP 64 bit PC with 10g Client with 11i Database - it does all work now?

  who...
  
  Really to just about everything in the header.
  
  Ive found a few suggestions in various forums on how others have had this working but nothing recent, and so I need to know if there is a proven to get this configuration works.
  
  Thank you
  
  Steven

  Hello

  Please see this document.

  Note: 781432.1 - Considerations using the Client with Microsoft products Oracle on the 64-bit operating system
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=781432.1

  Kind regards
  Hussein

• RAC 11.2.0.1 to 11.2.0.2 to the new Cluster upgrade with any number of nodes

  I'd like suggestions on upgrading a RAC Oracle 11.2.0.1 in Linux x86_64 RHEL 5.3 with 6 cases of a new cluster with 4 linux x86_64, RHEL 5.5 and upgrading to 11.2.0.2 nodes group of hotfixes.
  New SAN storage will be used. Both systems use ASM.
  
  Current system... New system
  11.2.0.1... 11.2.0.2
  6 instances... 4 instances
  Linux RHEL 5.3 x86_64... Linux RHEL 5.5 x86_64
  
  Method:
  (1) run controls and upgrades pre scripts
  (2) save the current database with RMAN and put at the disposal of the backup files to the new host
  (3) install grid Infrastcure on the new cluster 11.2.0.2
  (4) set up ASM on the new Cluster
  (5) install the Oracle RAC 11.2.0.2 on the new cluster database and create the database with the same name of the original database.
  (6) startup nomount using a parameter file and the source of DBID edited without the cars parameters (cluster_database = false, etc...)
  7-restore Rman backup controlfile to step 1
  (8) restore / restore incomplete database
  (9) OPEN RESETLOGS UPGRADE
  10) proceed to updates manual steps (script catupgrd.sql, etc.)
  (11) remove the cancellations additional tablespaces e redo log son
  (12) CONVERTED to THE CARS USING DBCA or RCONFIG
  
  This method is correct? Do you offer other methods or corrections?
  
  I also want to know if there is another thing to delete, besides redo threads and undo tablespaces, due to the smaller number of cases.
  
  I also considered using RMAN DUPLICATE to the same version (11.2.0.1) and then MOVE to 11.2.0.2, but DOUBLE would change the DBID.
  
  Thank you

  Hello

  your efforts seem valid, but its awfully difficult.

  Why not simply create a watch on 11.2.0.1 and then update.
  If you are using "duplicate for standby" should not change the dbid.

  Then, you can just 'turn on' the night before and continue the upgrade.

  Concerning
  Sebastian

• FMW: Portal upgrade to 11g - prepare OracleAS existing 10g: INTERNET_APPSERVER_REGISTRY. SCHEMA_VERSIONS &amp; PUBLIC. IAS_VERSIONS are not valid

  20/01/2011

  
  Reach
  http://support.Oracle.com [MOS]
  Dashboard |  Knowledge | Upgrade of advisors | Fusion Middleware portal to 11g upgrade |
  Configure | Check the Architecture meets the requirements

  "Prepare existing OracleAS 10g Architecture."
  Step 5. Search for disabled items in the database where the schema for Oracle Portal 10g
  RE: 14:02
  We have two invalid objects that would not recompile.   I'll open a SR?

  I tried recompiling them Toad and sqlplus.  SQLPLUS > display errors have shown no error

  Select the owner. » '||
  object_name | » '||
  object_type | » '||
  status
  of object
  When status = 'INVALID'
  order by owner, object_name.  2 3 4 5 6 7

  OWNER: "| OBJECT_NAME | "| OBJECT_TYPE | "| STATUS
  --------------------------------------------------------------------------------
  INTERNET_APPSERVER_REGISTRY SCHEMA_VERSIONS VIEW DISABLED
  INVALID IAS_VERSIONS PUBLIC SYNONYM

  http://download.Oracle.com/docs/CD/E17904_01/upgrade.1111/e10130/upgrade_classic.htm#FUPCL215
  said: the query does not return objects of database with a diagram of component of Oracle Application Server (for example, PORTAL, wireless and so on) in the column "owner".

  RE: I'm not sure that the db objects have a diagram of component of Oracle application server, but it looks like little that they could me.
  The view is a table of the components in the part.  And the fact synonym refers to the view.
  

  Hi Charlie
  Take a look at

  After the upgrade the management of identities of 10.1.2.0.2 to 10.1.4.2 INTERNET_APPSERVER_REGISTRY. SCHEMA_VERSIONS is invalid (Doc ID 557591.1)
       
  You have improved your IDM to 10.1.4.3 so (although the title speaks about 10.1.4.2 (I think that the problem addressed in the document of support applies to your situation. In short, the invalid view can be ignored - and goes the same for the synonym... IAS_VERSIONS... I think it is a synonym for the view - and therefore is too marked as invalid.
       
  If you are satisfied with this explanation please close this thread.

• 10g of functional problems upgrade to 11g

  Hello gurus,

  Upgrading an instance 11i, between 10 and 11g db. Can you help us with the list of common functional issues that business users would face, as linked to workflows, customizations, localozations etc... If anyone has the list of common problems to wait with their resolution, it would be very useful.

  Modules of Oracle - PO, OM, INV, WIP, BOM, PRJ, AP, AR, GL, FA, mobile Service, EAM, iProc, iExp, CPSA

  Thank you.

  A database upgrade is technical and it usually causes no functional problems. However, you may consult the following and see if they help.

  R12.1:invalid objects after 11 GR 2 Db and Ebs 12.1.3 Upgrade [1342701.1 ID]

  ORA-29532 after upgrade of database environment APPS [833237.1 ID]

  Autoinvoice does not process the records in the Table of Interface [ID 1513105.1]

  Registry of unused and unresolved recipes fail with ORA-06502 [ID 1471891.1]

  AutoInvoice error: RAXTRX does not all lines when called via RAXMTR, but imports successfully when run as a standalone [1272820.1 ID]

  Slow performance in Pick release after upgrade to RDBMS 11.2.0.1 (GR 11, 2) [ID 1087099.1]

  Configurator does not not after upgrade to 11 g 2 [ID 1206697.1]

  Transaction and quick ship shipping forms will not compile after installing new release 12.1.2 [1103188.1 ID]

  Slow performance or FRM-40212 to Documents - additional rules [1369124.1 ID]

  After upgrading the database to GR 11 2 formula generation times out [1166703.1 ID]

  Thank you

  Hussein

• Two instances are declining in physical waiting four nodes.

  Hello
  
  I am new to oracle.
  
  I followed errors:
  
  ORA-01105: mount is incompatible with mounts by other bodies
  ORA-01677: conversion settings for the hold file name differ from the other instance
  
  
  (1) I have chnged spfile in pfile of 1st instance which is down.
  
  (2) I changed the db_file_name_convert parameter by copying its value of 2nd pfile instances (as this instance is in place).
  
  that I converted the pfile in spfile file.
  
  (3) and I bounced the 1st instance with srvctl stop database nomBDD instancename-i d
  
  srvctl start database nomBDD instancename-i d
  
  but it won't turn. So I connected to sqlplus and run startup.
  
  N I got following error:
  
  ORA-01105: mount is incompatible with mounts by other bodies
  ORA-01677: conversion settings for the hold file name differ from the other instance
  
  Please let me know what I am doing wrong.
  
  Thanks in advance!

  Hello again;

  So should I convert all instances pfile to spfile one by one n than try to bring it on?
  

  Yes!

  Best regards

  mseberg

• Oracle Database 10 G R2 upgrade to 11G R2

  Hello all,.
  I sat down with a particular situation, and hoped some tips.
  I currently supports Oracle 10 G R2 installation with one of my clients. It runs on Red Hat Linux. I struggle a bit with the environment as my only customer commissions Linux environment without an X environment. Having said all that, it is my preference to upgrade the databases and the schema, I to 11G and put them under Windows purely because it opens the personnel of non-Unix administration. Applications that use the Oracle DBs are not very critical missions or strong intensity of resources so the loss of performance by moving to Windows is not an important factor (although all comments on this approach, we read with interest).
  
  So to cut a long story, which would be my easiest upgrade option? I have master them Oracle (read: "a lot of tinkering but no training").
  
  Any thoughts or advice?
  
  TIA
  Warren

  Welcome to the forums!

  PL see if MOS Doc 733205.1 (Migration of Oracle Database Instances on OS platforms) can provide the necessary information.

  HTH
  Srini