PBDS DVD +/-RW DS-8W1P Firmware

Similar Questions

• My laptop Inspiron 1420 PBDS DVD +-RW DS - 8W1P ATA Device failed... What is the solution?

  My laptop Inspiron 1420 PBDS DVD +-RW DS - 8W1P ATA Device failed... What is the solution?

  I'm not very good w / computer stuff... appreciate any guidance or advice in simple terms. Already did system restore, tried to uninstall/reinstall, but still not ok...

  Moreover, already done BIOS diagnostics/reboot... still persistent.

  When I click on the device mngr, properties, under the State, he said:

  This device cannot start. (Code 10)

  I did the above process several times already

  ???

  Message edited by cyke_jene on 06/25/2008 08:42
  
  

• PBDS dvd + rw - ds-8w1p (code 10)

  The unit will not charge and does not appear in my computer. It is the second time that this happens and I can't find the thread where was the solution that worked. I tried to reinstall and update the firmware, but when I tried the firmware could not find the drive.

  
  

• Problems playing DVD after update the firmware of the Inspiron 1720 / PBDS DS-8W1P (BD1C, A02)

  I updated the firmware of the DVD of my inspiron 1720. After that, the DVD is not played correctly. The sound is interrupted every two seconds and the screen freezes as well.

  I tried to find the old firmware (BD1B) on the dell download site, but can not.

  Any help would be appreciated,

  Best regards

  Martin

  
  

• Satellite PRO P100 - 383 DVD UJ - 850 s Firmware update

  Hello

  My laptop is a Satellite PRO P100-383 with a DVD burner MAT * a UJ-850 s.

  The current firmware of my DVD writer UJ-850 s MAST * one is 1.10 and I can't write some DVD-R, because they are not recognized as DVD-R, but as a CD - R. I think it's just the firmware of DVD writer that is too old.
  Is it possible to update this with new firmware please? because I found something in the download section for my laptop. Just drivers and BIOS of motherboard, but nothing on the MAT * an update of firmware UJ-850 s.

  Thank you very much for your answer.

  Friendly.

  Philip.

  Hi Philippe

  In my opinion you shouldn't change something but use high quality blank DVD - R TDK or Verbatim.
  Maybe you use some blank media cheap and without name.

  Have you tested with known brands?

• Satellite Pro A300D: Can I old DVD player to downgrade firmware

  Is it possible to recover the old firmware (1.50 worm) or newer for DVRTD08A drive?

  Unfortunately, I flashed this drive with the wrong firmware version 1.54 to DVRTD08L with label flash function.

  My drive does not have this feature. This firmware will not affect the player functionality?

  Hello

  Unfortunately, you can download only the updates of the firmware which are available on the European driver Toshiba page.
  If your favorite firmware update is available, then you would be able to downgrade it.
  Is there no firmware then you can not change this :(

  > Will this feature of player firmware affect?
  It's not easy to tell in many cases, you can still use the CD/DVD drive and will not see any changes, but sometimes this incorrect firmware can damage the disc and make it unusable.

• 9996 error trying to install PLDS DH-16A6L-C DVD-R/RW Drive Firmware Update

  I have a HP Pavilion a6417c running 32-bit Windows Vista.

  I get the error message 9996 (your system does not meet the minimum requirements for this update. Update has been canceled.)

  Documentation, all the conditions that I see are to be logged on as administrator and use Windows Vista.  (I'm connected under the only user account on the computer, which is the administrator account.)

  Someone had a similar problem or ideas on how I can get around this problem?  The update to improve recognition of the DL disks in the DVD player, I have already lost three discs try different imaging software.

  Hello

  Open this URL for software and drivers for your PC. Click on the plus sign in front of the Firmware updates.

  There are five firmware updates. The third update firmware TSST TS-H653N DVD (+/-) R/RW (+/-) DL RAM LightScribe, is for the optical drive installed on your PC.

  Happy computing!

  Jaco

• Cannot use my PBDS DVD +-RW DH - 16w1s ATA device

  My reader of cd/dvd on myINSPIRON 530 worked until a few days ago. I told it to best buy and have the geek team to solve this problem, but I hope to fix my car to save gas and the sentence. When I tried it said "Windows cannot load the driver for this hardware device. "The driver may be corrupted or missing (code 39). I did a search for drivers online and on my computer, but he said ' determined the software Windows device driver is up to date "and"the best driver is already installed." Can someone help me please?

  
  

• My DVD - R drive is suddenly only recognized as a cd player, now what?

  I have problems with my sound does not work and did a restore of the system that it has cleared up. I don't know if this caused the problem with the dvd - r drive but later that day there, I noticed that I couldn't burn DVDs more. When I did some troubleshooting I realized that the computer recognizes the drive as a cd player now. What can I do? I don't have a disk for it. When I go into the material it says it's working properly and they call it a dvd - r drive. PBDS DVD +-RW DS-8W1P

  Hi lnwn,

  Check to see if the following is useful.

  Method 1: We will uninstall the DVD drive in Device Manager and reinstall.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Method 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

  Method 3: If you are not able to playback of the DVD, follow the below article mentioned.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Drive DVD - RW does not recognize DVD

  I had no trouble to bury CD when there is no CD in the drive (or DVD) and I open Explorer - it reads like a DVD - RW drive, but if I put a DVD-R in the drive it says it's a CD - r that does not allow me to burn CDs right dVD I have video files, I need to put on a DVD. My computer came with software of engraving - which seemed strange to me - but I downloaded a free version of something just to see if it would burn something (I did not t wan to pay a lot if she wasn't working). I have a vostro 1000 and my dvd player is PBDS DVD + RW DS-8W1p. I've updated my firmware, but that did not help! Help, please!

  
  

• driver for my DVD +-RW problem

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)?

  PBDS DVD +-RW DS-8W1P ATA Device (D). Its comb from my computer laptop dvd/cd drive. I turned my computer off last night and when I turned it on this morning, and I want to see video DVDs and see not detected no dvd drive, I restart. I tried to uninstall, re install driver and then restarting and nothing. Quite simply, I restarted the computer. Nothing. I tried to clean my registry with 2 different cleaners. I uninstalled the drive, rebooted and still nothing. I went into the thing from my computer and nothing showed up. The icon of the disk was not in there yet. Help, please. Oh and the drive opens and looks like it is working but nothing appears on the screen. but I can open my dvd rom
   
  Help!
  
  

• Make sure you have the latest firmware for cd or dvd burner

  I can't burn videos on my cd or dvd burner. He say make sure you have the latest firmware for cd or dvd burner. What can I do?

  This forum is for Microsoft Security Essentials.

  Go to the website of the manufacturer of CD/DVD and get the firmware.

• Satellite Pro A200 (PSAE7): failed to update the firmware Vista

  Hello

  I tried tp update the firmware of my HD-DVD player with new firmware TO35 (SD-L802B), but it is not possible. The upgrade of this Winvup button is not selectable. I had the same problem with an older firmware, but I just thought that it was because the firmware is up-to-date (book is 1 month old).

  Winvup shows my drive as "TOSHIBA DVGW/HD SD-L802B TO01 (26/10/07). The discription of To35 said, he needs a version of TO33 or T034, that is the problem?

  I got this firmware update form [link firmware: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes & action = search & teddProduct = 737]
  so, it should be the right one.

  So what can I do to upgrade my drive? Watching a HD DVD is not possible :(

  THX,
  Holger

  It is not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page deigned for the TS-L802A drive.
  Do not mix these two discs! It is not the same thing!

  I found this site on the engraver of DVD Super-Multi SD-L802B
  http://www.storage.Toshiba.EU/index.php?id=3&PID=221

  But according to this page, the firmware is not available for this driver (at this time?  :|)

• Tecra 8100: Docking Station: Notebook reset when you try to burn DVDs

  System: Toshiba Tecra 8100 + Replicator port
  PA3017E + Expansion Station PA3018E,
  Samsung DVD Burner H552B (new firmware) built in (docking station).

  Problem: If I try to burn a dvd/CD, the system performs a hard reset and is inexplicable.

  What could be?

  Hello Stefan

  It's not easy to say why but maybe sometimes it s a burning question of the software?
  Have you tried using different burning software?
  I recommend to check if this problem occurs with different burning software.

  Best regards

• Qosmio G20: 1 x recording speed 16 x DVD - R Datasafe

  OK, I normally buy Verbatim and have never had a problem. At lucky on a tub cheap DATASAFE 16 x speed DVD-R and can only write speed 1 x. Manufacturer ID: CMC MAG. AM3.
  The drive is a carpet * a DVD-RAM UJ - 846 Firmware F101, serial number BD027ED1. The date of the firmware is 21/09/05 so almost a year. Of course I don't expect you to write at 16 x speed, but 8 x speed would be fantastic. Qosmio G20 material.

  Yes.
  You should know that not all readers to support all of the media and are not compatible with all CD and DVD.
  As suggested in the above display, you will find tested and compatible media information in the user manual.