PBDS dvd + rw - ds-8w1p (code 10)
The unit will not charge and does not appear in my computer. It is the second time that this happens and I can't find the thread where was the solution that worked. I tried to reinstall and update the firmware, but when I tried the firmware could not find the drive.
Tags: Dell Drives
Similar Questions
-
My laptop Inspiron 1420 PBDS DVD +-RW DS - 8W1P ATA Device failed... What is the solution?
I'm not very good w / computer stuff... appreciate any guidance or advice in simple terms. Already did system restore, tried to uninstall/reinstall, but still not ok...
Moreover, already done BIOS diagnostics/reboot... still persistent.
When I click on the device mngr, properties, under the State, he said:
This device cannot start. (Code 10)
I did the above process several times already
???
Message edited by cyke_jene on 06/25/2008 08:42
-
PBDS DVD +/-RW DS-8W1P Firmware
Hello
I have a laptop Dell Latitude D830 with a PBDS DVD +/-RW DS-8W1P disc. This player does not read many media, including the simple DVD-R containing data.
Is there any firmware use for updating this optical drive?
Thank you
Cédric
-
No access to the DVD drive - 38 error code
Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.
I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.
I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.
Thank you
Matt
Hello
Do you see a CD/DVD drive in Device Manager?
If so, then remove it from the list of devices.Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}Finally restart the laptop and check if the CD/DVD drive would still be functions
Further details can be found here:
http://support.Microsoft.com/kb/270008/en-us -
Satellite P30 145 cannot see Mat * a DVD RAM UJ831S - error code 41
My Satellite P30-145 has simply ceased to see my CD/DVD drive.
Yellow exclamation mark in Device Manager and a code 41. IE has the driver but can not see the material!
A loaded cd spins and the light flashes indicating it is read, but it's her.
Any ideas or suggestions?
Hello
The drive is displayed in Windows Explorer?
-
Equium A100: CD/DVD drive stopped working code 22
Toshiba Satellite A100 on Vista operating.
CD/DVD drive has stopped working and shows it as being disabled. Tried to re - activate but the error code 22. Can anyone help?Hello
The Microsoft page provides information about error code 22
* This device is disabled. (Code 22) *.
_Recommended resolution_
+ Activate the device using Device Manager. +
+ In Device Manager, click Action, and then select device. Starts the Enable Device Wizard. Follow the instructions. +Looks like you have already tired it. Well, in your case I would recommend removal of the CD/DVD drive from the list of devices in Device Manager. Mark simply the unit a press to remove.
Then, restart the computer and check what is happening.
-
Tecra M2 - DVD/CD Player error (Code 38)
Hello
my dvd drive is no longer recognized. I get this message in Device Manager:Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
When I "check for solutions" nothing happens. Can someone help me to make the drive working again?
Hello
I recommend to remove the CD/DVD drive device manager.
Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then restart the laptop and wait until the operating system windows has initialized the CD/DVD drive again.
Please post some results!
-
DVD player stopped working - Code 19
My DVD / Blu - ray drive stopped working and I got this message when I looked inside:
"Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »What should I do?
Suppose you are on Windows 7 (or vista or XP) then there is automatic and manual setting set for code 19 here - [http://support.microsoft.com/kb/982116]
-
P2 HP: DVD no longer works, code 19
Our DVD player shows no more in Explorer. We have recently upgraded to 8.1 and it had worked after the upgrade for several weeks so far. We use VLC to play the DVD and it does not recognize it either.
Now in Device Manager when I right click on GH82N DVD - RAM, I get this message. Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Any ideas on what to do next?
Hello
Please, use the following methods to fix:
http://support.Microsoft.com/kb/314060/en-us
Kind regards.
-
Lite-On iHAS124-04 IT burner - DVD "device cannot start Code 10".
Windows does not work with my DVD writer. This is the third I've tried and I get the same error message in Device Manager. "Device cannot start Code 10". It shows the correct driver and BIOS recognized correctly as a SATA drive.
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
problem HP dvd ram uj8c2 13 code
I have a dvd ram with an exclamation point in Device Manager that won't play DVD.
The problem code is 13.
Gear update drivers (gearaspiwdm.sys) gear Web site. http://www.GearSoftware.com/support/drivers.php
DVD player works now.
-
drive DVD-rom not working-code 19?
I have a dvd - rom Matshita drive does not. In the front of the device, it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) '. None fixes please? Thank you.
Hello
Do you have ANY suggestions I made in the listed order? If this isn't the case, please try again.
Panasonic is owned by Matsushita (or Mashita).
You should be able to get the drivers or firmware of your system manufacturer upgrades
If there is any. Most readers use the default settings of Windows. Check with Panasonic Mashita.You can also get information from the firmware here:
And probably by car help here:
I hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good.
-
DVD player not recognized code error (Code 19)
I do not see my dvd player
When I go into Device Manager, the CD shows a yellow watch marker.it also this below...
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
Help, pleaseTry the steps mentioned in this article:
Your CD or DVD drive is missing or is not recognized by Windows or other programs -
Can no longer write or even CD/DVD format. "Error Code COOD10DA".
Vista 32-bit, with AVG security and using TDK DVD + RW. Tried to burn a file from inside Media Player, received the message "error Code COOD10DA". Downloaded and run the Fixit utility, he said he had resolved a problem concerning "media being not not accessible writable", then invited me to format a data disc. Returned with the message "unable to complete the format". Can read disks OK.
Hello
- Are what "Fixit utility" you referring?
- The problem occurs with all files you try to burn and with all the DVDs you are using?
We get this error code whenever there is dust on the surface of the disc, the recording speed is high, interference with the programs that are running in the background.
You can follow the steps mentioned below and check.
You got the C00D10DA error message when you use Windows Media Player.
See also:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
Hope this helps and keep us informed if you need help.
-
HP Envy 15 t-3200-dvd player does not, code 19
Hi, I just signed up get this question. I'm 15, I had a year ago, but the dvd - rom drive does not work. Whenever I inserted a dvd, the drive would go, but it would not be displayed in the Explorer. I went to Device Manager and it says that the registry is incomplete or damaged (code 19). I can't find the driver on the hp support forums, but couldn't find the driver, the model of the drive is a "hp DVDRAM GS30N". Any help?
Hello
Try to follow the procedure at the title of the subheading "Let fix me it myself" (to half way down the page) on the link below to delete the upper and lower filters and see if that helps the issue.
http://support.Microsoft.com/kb/982116
Kind regards
DP - K
Maybe you are looking for
-
Upgrading CPU for Satellite L500-128
I have a 4-5 year old Toshiba L500-128 and I would like to upgrade the processor. ATM I have a Core 2 Duo T6500. I know that I can put a T9500 inside, but if possible I would ask a better. So I have a few questions: (1) can I put a CPU with front sid
-
Legend of the plot does not update?
My legend of conspiracy will not show the new names I'm wiring. It displays the default plot 0, track 1, and so on, rather than the column headers it is supposed to read the data file. Any ideas? See the attached VI and the associated text file that
-
Hello I was wondering what kind of table is who? Thank you
-
my cd/dvd disappear when I use Itunes to update my Iphone (filters down)?
I called Dell when my warranty was intact, but I don't have more support. They would do something to restore the high-low filters so that they would come again in the computer. I wish this would stop happening. No solution to my problem? Thank you
-
Reader of CD-ROM/DVD-Rom not detected/recognized
Earlier today, my DVD drive was working fine. My laptop a HP Pavilion dv9000 shut down on its own. When I restarted, the computer doesn't recognize any DVD/CD, I tried to insert. I ran auto Microsoft fix this program, but after several times it would