PC becomes slow. provide the solution

Similar Questions

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• Pavilion 17-f113dx: Internet becomes slow when the charger is unplugged

  Hi all

  I have a problem with Internet on my computer whenever I unplug the charger internet connection goes down, I need to plug back in so I can use internet properly. The question began only a few days when windows update prompted me to install the new drivers wifi. My laptop is a HP Pavilion f113dx 17.

  Hope someone can help, thank you. Nice day.

  @Albie08

  Welcome to the Community Forum of HP.

  It's unfortunate - both drivers Wireless illustrated the State of your laptop Driver Support page specfically this version should improve (and certainly not degrade) performance.

  Ideas

  ---------------------------------------------------------------------------------

  Assuming that you have chosen to create a Restore Point before you make these changes to your computer, you can easily "pass in time" from before the last set of updates have been installed.

  Using Microsoft System Restore (Windows 8)

  ---------------------------------------------------------------------------------

  Use your Recovery Manager to install the original Wireless driver that was preinstalled on your computer, while he was 'new ':

  This document explains how to reinstall hardware drivers and software that were originally installed on the computer at the factory.

  Using Recovery Manager to restore the software and drivers (Windows 8)

  ---------------------------------------------------------------------------------

  Boost the signal on your network wireless when running on the battery.

  See

  Parameters to improve wireless connectivity

  Section:

  Laptop wireless hesitates or does not work when executing a stack

  ---------------------------------------------------------------------------------

  For later - you must let not updates sneak up on you - or allow automatic updates to update the system without having you the time to decide whether it is convenient or critical the right time for this task.

  Updates - when and how

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' Kudos on this post.

  Click on accept as Solution when my answer provides a fix or a workaround!

• Managing roles using the solution of the OIM/OAM/OID

  Dear members

  I am faced with confusion while providing the solution about the OAM and OID.

  We have the portal WC system where authentication solution implemented using OAM 11 g. We expect authentication based on roles with the help of OID/IOM.

  I hear, by authentication based on roles, we're essentially the user roles will find in these roles. So they have will go through SSO system and their landing page will be the same. But the controls and links will be displayed according to their role.

  We do not use oracle role manager then manage it using OID.

  Is there a possible solution. Please help me its urgent.

  Thanks in advance.

  
  

  Concerning

  Arun Kumar Singh
  

  Hi Arun,

  In OAM, you can define authorization policies that allow or deny access to resources based on a value of attribute (of the logged in user). For example, you might allow access to the url/admin only to users who have a value of 'Administrator' in an attribute. Another approach is simply to set the attribute as a Variable for header (this is also defined in an OAM authorization policy) so that it is passed to the receiving application, which can then query the value of the attribute and take appropriate action.

  In these cases, OAM is only using the values of the attribute or send them to another application. To manage the values (put them properly for users/applications etc.) you would use a tool like the IOM to ensure that they are properly sized.

  Kind regards

  Colin

• Firefox has becomes slow and unresponsive after that I tried to install the addons (not installed)?

  I recently format my computer and reinstall windows 7, since it was the only way I know of to solve the problem with Firefox (I already had this problem too). I download the latest version of firefox 33.0.2 and install it. This version was super fast. But becomes slow and unresponsive when I tried to install the Add-ons. I visited the official site of firefox and searching for addons, when I tried to install addons, Firefox crashed. Therefore, it has becomes quite slow and cannot restore previous sessions. Even to type my email address, it takes more than 5 minutes and reacts more frequently (after typing each letter).
  I want to know if this is due to some viruses, or this version of firefox is not "stable".

  Hey there,

  We are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID begins with bp - and then back to your forum question but that stick in the box of "Post a response. (Please do not take a screenshot of your plant, just copy and paste the ID image below is just an example of what your Firefox screen should look like)

  

  Once you have done so, you could try the Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  I hope this helps!

  Curtis Parfitt-Ford
  Support for Mozilla

• Sites Web has become slower over ssl when we activated the stack ipv6 on the XP machine.

  Slow browser in xp with ipv6 enabled via the SSL (on ipv4) while on win7 is not?

  Sites Web has become slower over ssl when we activated the stack ipv6 on the XP machine.

  The PC connects to internet IPv4 and ssl vpn is established on the ipv4 internet. When we uninstall ipv6 stack it becomes okay.

  The real solution is to fix the DNS server that is causing these problems. http://www.sixxs.NET/FAQ/DNS/?FAQ=ipv6slowconnect

• The response of the mouse becomes slow and I get the low battery warning

  Original title: Use the Microsoft Wireless Multimedia Keyboard 1.1 model 1014.  Recently, I had replace the batteries in the mouse at least once a week.  Is there a solution?

  The response of the mouse becomes slow and I get the low battery warning.  Until this started happening batteries have been change less than a month.

  Hello

  1. What is the brand of mouse and the model?

  2 have you ever done any recent software or changes to the hardware to the computer?

  If you use the Microsoft mouse, I suggest you follow these methods:

  Troubleshoot a wireless mouse that does not correctly:
  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:
  http://support.Microsoft.com/kb/838398

  Use the following tips to get more life on the batteries in the keyboard and mouse:

  a. use the mouse on a surface of clear color. With the help of the mouse above a black surface can deplete the battery at a faster pace.

  b. do not use the mouse on a glass surface.

  c. when replacing the batteries, use alkaline batteries. Other types, may not last as long.

  d. when wireless devices are not in use, store them near the computer.

  I hope this helps!

• I think to buy a new MacBook to replace my MacBook pro mid-2010, which still runs but becomes slow.  They say the current MacBook pro without retina display (which I don't think I need) is an old system and may be obsolete soon - true?

  I'm buying a new MacBook to replace my mid-2010 MacBook Pro 2.4 GHz Intel core 2 duo, 4 GB of memory, which always runs, but becomes slow.   I don't think I need retina display (if I have a lot of photos and films on the subject), but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?

  Barbara cfrompa says:

  but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?

  Apple only can answer such a question, and the terms of use for these forums discourage us discuss what Apple plans to do.

  I too have a MBP 2010.  I installed an SSD and that increased performance.  Consider that as an option.

  You may experience other problems that slows down your MBP.  Before commit you the important cash for a new MBP, examine the potential software problems that may be responsible for the poor performance.  With the SSD, my 2010 works better than the day he came out of the box.

  Ciao.

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

  When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

  Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

• I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this.

  I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this

  Assuming that you are talking about disk space from in the guest OS. You are probably using an MBR partition table, which limits the maximum usable disk space to ~ 2 TB. In order to use the entire disk space, you need a GPT partition table.

  André

• Becomes slow, mainly in the 5 Lightroom library module

  PC, Windows 7 Ultimate, 12 GB ram, Lightroom 5 CC, a lot of hard drive space

  From the advice given here when I started using LR, I created a catalog. There are now about 185 000 pictures.

  Lately, I have been see very slow performance when you move files to a folder on the same hard drive. It is also very slow to display the keywords and I now get messages when I am ready from lightroom it is still written data to the metadata.

  A test, I went to file manager and copied about 50 image from one folder to another file. It was alsmot instant. I also tried to move files in Nikon View NX2 and they were also very quick. Then I ran LR and tried to move the same files in the same folder, and it took a lot of time to move only one image. 3 minutes?

  I optimized the HDD and I let Norton clean the registry.

  Thus, the questions that I see seem to be in Lightroom and not on the system itself. LR works very well in the develop module. I don't see a lot of questions here.

  Any help or advice would be appreciated.

  Mr. Jackson

  The solution was simple, change the metadata Panel to display the default instead of EXIF and IPTC data (that I have always been used in LR).

  Here are the relevant thread:

  http://feedback.Photoshop.com/photoshop_family/topics/lightroom_5_5_2_the_library_module_i s_painfully_slow

  There is a simple solution to a bug that struck a number of us.

• Firefox 7 is slow loading web pages (more than a minute and I let it go, but I went and they finally loaded) and IE their charge quickly. I tried all the solutions aid without change. I disabled Norton without change. I am running Windows 7.

  When I restarted in safe mode, everything worked fine, so I disabled the Add-ons and plug-ins, one at the time but could not find one any of them causing the problem.

  I had the same problem and found the solution here here

  The solution involves going to about: config and change "Network.http.Max - connections" line value between 256 and 48

• Download speed very slow on the wired Ethernet connection

  I am currently getting 200 Mbps down and 0.3 MB/s on my desk wired Ethernet connection. I should get 200 down and 20 upwards.

  • On my wireless adapter on the same router, I have ~ 18 Mbit/s to the top and about 15 Mbit/s down, which seems that the wireless adapter works fine.
  • I plugged in another computer with the same cable on the same router port and got the full speed (200/20), then the problem lies within my computer.
  • I made a transfer of files to and from my computer to another computer connected to the same router and I got the full speed Gigabit times come and go.

  I searched high and wide on the internet and forums, and that many people have had the same problem I have, nothing of the multitude of solutions worked for me.

  That's what I tried without success:

  • Uninstalled the Ethernet card, deleted the drivers, forcing the new drivers to install again. No change of speed.
  • Carefully checked for Virus and malware programs (crossed the registry as well), but found nothing, and nothing has been installed recently other than windows updates.
  • The only antivirus I have is Windows Defender. I turned off and turned off the Windows Firewall, but speed did not improve.
  • I tried with IE, Chrome and Firefox, speed with different services and all tests show similar speeds. I also used FTP to a server I have, and the speeds were the same.
  • There is no other traffic devours bandwidth.

  So what I have gathered so far, it's that my Ethernet card works very slow only when downloading from the internet. Within my network, it works fine.

  What is a service that does not work well? If so who? I am not knowledgeable on the use of all services. I checked IPv4 and IPv6 and they both seem to be configured correctly, but I can't say that I am certain of what "correctly configured" is.

  These are my specs:

  HP Desktop H9 - 1215t

  Windows 7 Ultimate SP1

  32 GB OF RAM

  64 bit

  Chip Intel i7-3770

  Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)

  I would really appreciate some help here because this problem I'm paralyzed.

  Thank you for your time,

  Tom

  By George, you got it!

  For someone who thinks he's good at Googling, I could sure use some improvements!

  The key has been the link to explanation. While I had been close to my tests, this for shows that even when you sort-of-one little-peut-be-think you know what you're doing to keep your legs unless you know EXACTLY what you are doing.

  The answer was definitely Large Send Offload, but it was a little more complicated, at least to understand what really happened. Neutralization of him gave the tour, but now I work with an active v2 and it works like a charm.

  I will detail what, in my opinion, happened here for those who may have similar problems so that they (you) may be able to figure out, as all cards are different and may require slightly different settings.

  I live in an area where so far the download speed over fast, I was able to get is 2 Mbps, on a good day, it's usually on average 1 ~ 1.5 Mbps. download speed is between 5 ~ 20 Mbit/s.

  I do a lot of video work and I constantly have to download large files on my servers. I got the computer described above about 8 months ago, and my Age (2 years) one remained on my home network.

  For a week or two, I was cursing my ISP because the internet was slower than usual and very glitch. I tested my speed and got 20 down and 0.2, repeatedly. So I went through the long and technology-challenged call representative to 'help' me, I was paying for 20/2. Only option was to wait a week for a technician to come out of my house, he stressed have shot my injurybut not before you ask me, that there are faster speeds to internet available in my place. 200/20 which is 10 times what I had, so of course I went with her. In doing so the representative asked me to Exchange my modem/router for a new handle faster speeds.

  When I replaced the modem/router, I found that the download speed went from 50/0.2 (after the new request speed but still with the old router) to 200/0.3~0.5 with the new router. I also had a Cisco E2000 router that I turned into a switch, which was also bogged down internet high speed (now that they have been much faster). But still the download speed has not really improved.

  This long and winding history is so that you (read this with a similar problem) might find the answer to your particular problem.

  Looking back when I said that the issue was in my computer because that became high speed was not quite accurate. The 'problem' was beyond my router, if the solution was in my settings with the LSO parameter. The 'problem' was not really a problem since what I see (guess) that's happened is that my ISP has been updated with equipment, and the settings on my new pc has become a problem while paradoxically not so in my old pc.

  My old pc equipped with a "Realtek PCIe GBE Family Controller" and the IPv4 LSO parameter turned on, that she was no problem under the new set of circumstances ISP. 200 / 20 Mbit/s.

  Then when I compared the setting on my new computer, it never crossed my mind that the neutralization of him would solve the problem.

  My new pc has a Atheros AR8161/8165 controller PCI-E Gigabit Ethernet (NDIS 6.20). This adapter has a setting "IPv4 LSO" more setting "IPv4 LSO v2" and "IPv6 LSO v2" décor. I don't think that my ISP uses IPv6.

  In my quest to solve the problem, I placed all of the above settings to "Enabled", without success and in my fog don't reverse these settings.

  With the 3 off, it worked fine, but I got a 5 ~ 10% improvement on the download speed with the LSO IPv4 v2 enabled and the other disabled.

  There is no way representing the service provider on the phone could know this, so calling them would not / has not solved the problem. Even waiting a week for the technician most likely would not have solved the problem as it would be measured using a laptop full download and the download speeds.

  I'm sure this will become a problem most current internet speeds that House are starting to soar (thanks Google!), so I hope this helps those who have similar problems.

  To summarize:

  Click on start->Control Panel->Device Manager->network adapters-> your adapter name (mine is Atheros AR8152/8158 PCI - E Fast Ethernet Controller (NDIS 6.20), right click and select Properties. On the advance tab, find good Large Send Offload (IPv4) and change its value to disabled , and then click on OK.

  If you have a Large Send Offload (IPv4) v2 try to set that to enable (with either a handicapped of course).

  I hope this helps!

  And thank you George.

  Tom

• Slow down the Sierra, grief beach ball

  Initially, after the download of the Sierra, all was great. Now, the day and a half later, performance has significantly slowed down and a lot of rotation beach balls advance a little.

  Ways to help make a slow Mac faster

  1. 17 reasons why your Mac runs slower than expected
  2. Slow performance of Mac? This Article addresses!
  3. Difficulty of slow start in OS X | MacFixIt - CNET Reviews
  4. How to fix the slow down time and start. | MacTip.net
  5. 6 easy tips to speed up OS X Yosemite on your Mac.
  6. OS X El Capitan - if your Mac runs slowly
  7. Visit The FAQ XLab and read the FAQS on performance

  Avoid using any third-party cleaning software. Usually, this software does more harm than good. You don't need it. All computers become slower over time even in normal conditions of use. Experienced users erasing the hard drive and do a clean install from scratch, from time to time; or every time that the installation of a major update of the OS. Do means if you must maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Delete unnecessary anti-malware software and any software that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan activity. Also, visit The FAQ XLab and read the FAQ on the treatment with The Spinning Beach Ball of Death.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.