PC blacking out

My computer has been blacking out since I've owned it. I bought it in February of 2014. It's an ASUS M11AD.

I'm playing a game, watching a stream on Twitch, shoot, I was even just about anything else that a Skype call with a friend and the monitor will not be recognized by my PC. The monitor will say, 'Not of VGA Signal' or HDMI, if that's what I've got he's going through. It does not do in 5 minutes to turn on my computer, but it is unclear when that will happen. There are days where it occurs and the worst of times, it happened 5 times in 30 minutes. I tried three monitors and 3 HDMI cables, I used the VGA cable my monitor came with (a specifically purchased ASUS monitor to try to fix it) and no progress. I have the Tower sitting on top of my desk in a room well, is not wet or hot. It is not an overheating problem. I never felt it losing its icy touch (I'm quite satisfied with its cooling system).

I have a three year warranty on my computer with FRY's electronics, but unless they can reproduce the problem, the warranty covers any hardware problem. I took them four times, all four times they could not subordinate the issuance materialize.

I'm really at a loss here. I paid a little for the PC and the three-year warranty, and now I am just overwhelmed by how much a 'hole in my wallet,' this will put if I have to replace it.

Thanks in advance for any insight and effort on the problem.

Perhaps you need to review your assumption: is your problem really caused by a missing video signal or is there another cause? If it was my PC then I would do this:

  1. Install a program take remote control, for example (free) WinVNC.
  2. Test it using some other PC (even an old one will do!) to take over the PC problem. The two machines must be connected to the same network.

Now establish a connection when the problem PC turns off. If the other PC displays the image you expect, then you have a problem with the video signal. If it shows nothing, then there is another problem.

Post again if you need instructions with the remote control plug.

Tags: Windows

Similar Questions

  • My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

    My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Toshiba 42L6453D is blacking out for 1 second interval every minute

    I have problems with my Toshiba 42L6453D TV new blacking out [Picture & Sound] channels not HD for 1 second interval every minute or so - HD channels are functioning properly.

    I tried to re-tuning many times, but on some channels this question just keep occurring.

    I also had problems with not only endangered HD channels and have to retune the TV to get back them.

    Any ideas?

    Thank you
    DG

    Try resetting the TV to the default settings. I mean back to the factory settings.
    Then retune the channels once more.

    By the way; the TV supports different tuners
    In the worst case, there would be a problem with one of the tuner you are currently using.

    So in my opinion it would be advisable to test the functionality of channel not using an additional set-top box external HD

  • Screen blacked out how I can restore

    my screen has blacked out how to restore it

    Try to force your iPad to restart. Press the sleep and home for about 20-30 seconds. If you see the silver Apple, let go and let him complete restart and see if your screen at the back

  • Lower third of my screen has blacked out. What should I do?

    Lower third of my screen has blacked out. What should I do?

    Hello

    1. what version of Windows is installed on the computer?

    I suggest you try to execute this fixit and see if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    It will be useful.

  • Computer keeps blacking out while watching TV Online, videos.

    Original title: my computer keeps blacking out.

    my computer keeps blacking out to halfway through a program when you look on line tv sticks, videos and memory I lost all sound and image and hear just a brrrrrrrrrrring

    What is VLC?

  • video of CTR. Serious media blacked out, win his other works very well, RDO xp 3

    When minimized in fullscreen. the video went black and stayed that way... I have the drivers updated and checked all wiring, DVD perform very well but recorded tv is blacked out... sound and guides etc all work very well... video image is blacked out outl... This error event is to the right time I think it appeared all first...

    . 0000: 41 70 70 6 c 69 63 61 74 Applicat
    0008: 69 6th 6f 20 46 61 69 6 c ion Fail
    0010: 75 72 65 20 20 65 68 72 ure him
    0018: 65 63 76 72 2nd 65 78 65 ecvr.exe
    0020: 20 35 2 2 31 32 37 31 5.1.271
    2nd 0028: 35 33 30 31 31 20 69 5.3011 I
    0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
    0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
    0040: 32 36 30 30 2 36 30 35 2600.605
    0048: 35 20 61 74 6f 20 66 66 5 discount
    0050: 73 65 74 20 30 30 30 31 the value 0001
    0058: 39 32 66 39 92f9

    ehrecvr.exe version 5.1.2715.3011 failed application failed module ntdll.dll, version 5.1.2600.6055, fault address 0 x 00019219.

    Use another media player and see if the problem occurs.

    Try VLC or Windows Media Player.

    See also:

    ehrecvr.exe error
    http://forums.techarena.in/mediacenter/63137.htm

  • blacking out text

    I have a hp 4620 all in one. Lately when I print documents mainly bank statements or credit cards that the page will get out more with text blacked out. What is going on? He has never done this before that I'm now using windows 10. If I print something on the internet as a reciepe it prints well

    HELP ME PLEASE

    has run print and scan doctor found nothing. realized for some reason documents were sent to series class driver when I turned it to network series driver is printing very well. Thank you for your help

  • Why is 1/2 on the sceen blacked out when I play youtube videos

    1/2 OF THE SCREEN IS BLACKED OUT ON YOU-TUBE VIDEOS

    IT SHOWS THAT 1/2 OF THE VIDEO, THE OTHER 1/2 IS BLACKED OUT

    IT IS CUT RIGHT DOWN THE MIDDLE OF THE SCREEN

    I DON'T SEE THAT 1/2 OF THE VIDEO

    Hello

    1. have you made changes on the computer recently?
    2. what Internet browser do you use?

    Method 1.
    Try to play another video on youtube and check.

     
    Method 2.
    Given that most online videos require Adobe flash to work I suggest you install Adobe Flash player in Internet Explorer.
    I recommend you update Adobe flash player on the website below:
    http://get.Adobe.com/flashplayer/
    I hope this helps.

  • Toolbar is blacked out in Internet Explorer.

    The bar menu and order at the top of the screen are blacked out.  I had the default bars, with the 'Favorites' and 'tools' etc it and now they are all blackened.  How can I get the toolbar to its original (default) State?  I am running Windows XP.

    Hello

    Is it in IE? If so you can reset IE Internet Options.

    "If you find my answer helpful please click the"Useful Vote"button beside my response"

  • Monitor blacks out, error message "does not signal.

    This problem just started today. My screen keeps blacking out. I checked the cables and they were good. I did a Defrag. I changed my settings to standby power screen forever. When the screen turns off, the error message is "" does not receive do not signal. "" Is this a hardware or driver problem? Thank you.

    Hello

     
    1. have you made changes on the computer before this problem?
    2. What is the brand and model of the computer?
     
    I suggest you try these methods and check.
    Method 1:
    Start your computer in last good known Configuration mode and check.
    Advanced startup options.
    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
     
    Method 2:
    If you find the same problem using last good known Configuration, start the computer in safe mode and check.
    If the computer works fine in safe mode, uninstall the display driver, restart the computer in normal mode and check.
    Step 2:
    Uninstall the driver from Device Manager graphics card.
    1 right click on the computer icon
    2. Select manage from the menu.
    3. Select Device Manager in system tools that are listed in the resulting display.
    4. right click on the device.
    5. click on the driver tab.
    6. click on uninstall.
    7 restart the computer
    You can download and install the latest driver for graphics card on the computer manufacturer site.
    Graphics driver will reinstall after a reboot in normal mode, if the computer is connected to the Internet

  • I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

    I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

    1) update your nVidia/software drivers to the latest version for your model video card + operating system.

    (2) check that the equipment is not defective.

    This is not a Microsoft / number of the operating system.  For additional troubleshooting - contact the manufacturer (nVidia).

  • When you use Windows Photo Gallery to see the photos, half of the photo is blacked out diagonally.

    Original title: Windows problem Photo Gallery

    When you use the Windows Photo Gallery (Windows Vista) for photos, half of the photo is blacked out diagonally, so there is a triangle of the image and the black triangle. Any advice on how to fix this?

    Thank you!

    Hi Joe Boston,

    You can read the following article and see if it helps:

    Transition issues of image in Windows in Windows XP or Windows Vista Photo Gallery

    You can also read the following article and check.

    An image and its background becomes yellow in the Windows Photo Gallery in Windows Vista

    Hope this information is useful.

  • Metro UI is blacked out

    Most applications that use the metro UI run in a very low resolution and have many elements blacked out.

    screenshot: http://img507.imageshack.us/img507/1613/gw3j.jpg

    Hi Snipersixate,

    I suggest you uninstall display drivers and reinstall the last of the computer manufacturer's website. Also try to install in compatibility mode.

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    It will be useful.

  • Text on the Pop Ups is blacked out

    Can anyone help with this? I am slot as Photoshop elements 14 10 Windows and all the text on the pop-ups is blacked out. I tried different files and reinstall, but it's always the same. I can't change anything in the program, because everything is blackened, so I have no idea what to press on, or even button that says 'Okay' or 'Cancel '.

    I have attached a screenshot below:

    Screengrab.jpg

    Someone else has this problem? What is the solution?

    I'm also under first elements 14 on the same machine without any problem. It's a new generation machine with a processor i7, a GPU GTX970 and 32 GB of RAM, this material should not be a problem.

    Thanks (again). Does not work either - I reinstalled again and it seems to have done the trick for now. If all goes well, it is not a recurring question!

Maybe you are looking for