PC DOESN'T RECOGNIZE IS NOT MY COBY MP3 PLAYER OR MY SWAGGER PLAYER MP3

Similar Questions

• iTunes doesn't recognize or not restore iphone 5s

  Monday last iTunes stopped recognizing my iPhone 5 s when I plug it to my PC. This also means that it doesn't connect on wifi for my iPad to use hand-off.

  I tried to reinstall iTunes and update iTunes and the phone. I also tried to restore the phone but iTunes doesn't recognize even in recovery mode. I tried to reset the network settings and nothing has worked.

  I don't want to take it to my local dealer because one of the guys he has messed up my old iPhone 5 and I configured on the wrong carrier after giving me 2 messed up phones under warranty.

  Erase all content and settings to fix this or am I just stuck with a phone that does not work with my other devices?

  I thought I had tried all the tips listed before but have not seen the thing on Device Manager. Now it works again.

• Computer doesn't recognize is not the readers

  Hello!

  So my girlfriends mid 2009 stock 13 '' MacBook Pro HD went crap and I bought a new. It is a Seagate 1 TB hybrid SSD and its a HD approved Seagate and is 100% compatible with the computer. In any case, I got the drive and installed. I have a bootable USB key with OS X El Capitan on it and proceeded to install a new OS on the drive, but about 5 minutes in the installation has failed and asked to restart or shut down and try again (it was also showing the log files).

  I rebooted and held down the option key to display the bootable disks and now nothing appears. I tried to use different external drives, tried to use even the recovery of the internet, different USB ports and nothing works - he plays just the startup sound and a white screen blank forever, until I press the power button to switch it again 10 minutes or later. This continues to be! I have a feeling that the motherboard has gone to sh * but I wanted to post on here to see if anyone had any ideas? I talked to AppleCare and they have nothing in addition to sending the computer in which I do not for the moment.

  I recently reset SMC, NVRAM, started in safe mode, etc all before I ordered and installed the new drive. Should I do it again just to make sure this isn't one of those issues?

  Also forgot to mention that when I installed the new HD, I was able to format of OS X journaled extended, then proceeded to install the new OS.

  Also sometimes the computer actually shows the Apple logo at startup and a status bar (before I select a boot drive) 3 minutes later this black-bordered code (which spans the top of the screen down) appears on the left side of the screen, and then the computer restarts again. -So who plays a role any in everything that's wrong with her.

  Thanks in advance!

  Josh

  Use the diskettes provided with the MBP original Leopard installation.  Your El Capitan USB Installer is maybe damaged.

  If possible, try to install El Capitan with another Mac.

  The Seagate 1 TB SSHD is certainly compatible because I had installed in my MBP.

  Ciao.

• Computer doesn't recognize is not the Vista USB devices

  I have been looking for forums for hours. I put music on my mp3 and it worked fine, I switch between two different players. then I went to plug one of them in and... . nothing. USB ports are supported but computer, do not put the devices, I can't access it anywhere. Ditto for everything I plug into them. fee but usually has access to any device I plug im in. going to vegas tomorrow and would really like to put new music on my player. can anyone help please?

  * original title - USB problem *.

  Hello

  ·        You get an error message when you connect the USB device?

  Method 1:

  I suggest you follow the steps mentioned below and check if the problem is resolved.

  With the drive plugged in

  1. go to Control Panel by clicking the Start button and select Administrative Tools.

  2. click computer management , and then select disk management on the left

  3. then turn on the player.

  Method 2:

  I suggest to assign a new drive letter and check if the USB key questions in the computer.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Method 3:

  Remove and reinstall all USB controllers. To remove and reinstall all USB controllers, follow these steps:

  1. click Startand click run type sysdm.cpl in the area of publication, and then click OK.

  2 click the hardware tab .

  3. click the Device Manager button.

  4. develop Bus USB controllers.

  5 right-click every device under the theUniversal Serial Bus controllers node and then click Uninstall to remove them one at a time.

  6. restart the computer and reinstall the USB controllers.

  7. connect the removable USB storage device and test to make sure that the problem is solved.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Downloaded the album doesn't play no not on Windows Media Player

  I recently bought a movie that included the soundtrack download. I downloaded the soundtrack the same day that I ripped several other CD on my computer. I encountered a problem where for some reason, everything was put in my document rather than windows media player, which never happened to me before, so I transferred both downloaded album all CDs ripped on a playlist on windows media player. When I was unable to get transferred to my library, I gave up for the day and thought a few days to think about that I could understand it. I came home last night and all the albums themselves had moved into my library, with the exception of the downloaded album, and when I clicked it, a message comes up saying windows media could not find the file and that if I tried to burn, rip, or sync and the album that represents the position in my library, can point to an album that has been moved renamed, or deleted. I went to move my documents once again, but he was no longer there and the only place where I can find it is in the playlist, where it does not. I tried redownloading it, but it's a download time. I ran the windows media control and he says he has a corrupted file but don't tell me what to do to this topic or even what the corrupted file was for sure, but I guess it was the downloaded item. If anyone has ideas of how to do to solve this problem it would be greatly appreciated

  Unfortunately, it was a Web site that has been created strictly for downloads, and when I click on the download that put it directly in the folder my documents, where I had to then transfer to my playlist, so I think he just didn't upload properly

• Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

  Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

  

  delilah12

  Which operating systems are involved - old and new?

  The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

  Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

  Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

  messages? Can you enter into the project and render it again if necessary and proceed with the project?

  Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

  the passage from one computer to the other.

  RTA

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!

• Gigaframe L80 - Windows doesn't recognize it as a second monitor

  Hello

  I have a Toshiba Gigaframe L80 but is not fully functional.
  Windows doesn't recognize it as a secondary monitor so I can't extend the desktop in the framework.
  Only works in clone mode.

  I tested it on 2 computers according to the manual and the addon, I installed the .NET 2.0 (and 3.0) and I use the software/driver that comes in the box, but it is not recognized and is not shown in display properties.

  Can you help me?
  Is there a driver/software/firmware for the L80 was updated to fix?

  Anyone with the same problem?

  Hello

  I found this info:

  Sub visualization allows the Gigaframe to act as a second monitor for your PC
  To activate the view Sub follow these steps:
  (1) install subview on the laptop.
  (2) in the main menu of gigaframe select settings, then press OK
  (3) select subview and press OK
  (4) select and press OK. Now the Gigaframe is in display Sub mode and is not operable.
  (5) connect the GigaFrame to your PC with the supplied USB cable
  (6) run the subview on your PC software
  (7) the display of Sub pop window, display the current screen display in the gigaframe

  By activating the function void View the willing Gigaframe of two display modes:
  Scope and the Clone mode.

  To assign the suffixe_etendu mode_ Gigaframe follow these steps:
  (1) right click on the desktop and select properties from the menu
  (2) in the display properties panel select the settings tab
  (3) under the view drop-down list, select 2. default monitor on Subview
  (4) check the option extend my Windows desktop on this monitor and the bottom of the settings tab

  Note: in extended mode screen gigaframe becomes your office extensions!

  To set the Gigaframe in _Clone mode_ follow these steps:
  -Uncheck the extent my Windows desktop on this monitor option!

  The gigafmae display the same screen as displayed on the monitor of your PC in Clone mode!

  Love let you subview job function properly, please consider to stop your acceleration DirectX function! _

  If you want to play the video on the Gigaframe, you must select it * as primary monitor! *

• My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera

  My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera. And also on Device Manager I do not find the Image device where I should find the camera

  Hello...

  If you have already tried the factory reset, it might be a hardware problem with the webcam. In this case, you will have to send the laptop for repair.

• I play with my lap top and accidentally decliques the network to which the computer used, now when I login it doesn't recognize me, I can't even on the desktop to fix

  Microsoft windows xp professional

  Ctrl alt del to access

  and then type the password

  doesn't recognize me any more that I décliqués the wrong box to change the settings of the home network

  Hello
  
  1. is your computer connected to a domain?
  
  If your computer is connected to a domain environment I would ask you to contact the administrator of the computer.
  Your journal Id and password is checked on the network, since you are not able to connect to the network it is why you are unable to connect.
   
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  I have loaded a series of MPEG-4 audio layer files on my rocket. I can see them on the "rocket" when I consider my computer but not the "rocket" itself.

  Anyone know what I'm doing wrong?

  Thank you

  Donn

  The Sansa times .mp3, .wma. OGG, FLAC and .wav. It cannot decode m4a or mpeg-4.

  Are downloads of iTunes? Apple doesn't want read you elsewhere on your computer and whatever this dopI little pocket music player they do is called?   M4a and .aac are owners of Apple formats.

  You must extract these files from CDs in mp3, or if you do not have CD you will need to convert m4a to mp3. Download the free media encoder and conversion (transcoding) these files mp4 to mp3 high quality, 192 Kbps or higher. If you use more low-quality mp3 will save you space, but the sound quality will suffer.

  And if you use iTunes to rip a CD, you can change the settings (in Edition/Preferences/Advanced/import music, which differs from the advanced visible tab) to mp3 instead of m4a files when rip you.

  If your files are m4p, the p is for protégés who are protected against copying the files, which means that you're not supposed to move on another device.  The only way to convert is to go into the underground world of pirate.

• my computer doesn't recognize my usb device and mouse

  MY COMPUTER DOESN'T RECOGNIZE THE DEVICE USB AND MOUSE IT NOT THERE NO COMMUNICATION BETWEEN THE COMPUTER AND THE MOUSE ALSO COMPUTER AND PORTABLE USB

  Thank you

  You must indicate what is the brand of mouse and the model? Whjat transponder type does the mouse have? The mouse has ever worked? Your laptop has 4 USB ports. No device works in one of the ports?

  The USB FLASH DRIVE is recognized if plug you it into a USB port on a different computer com?

• My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.

  Original title: CDs? DVD not recognized

  My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.  No error message does nothing! ???

  Sorry my bad https://support.microsoft.com/en-gb/mats/cd_dvd_drive_problems/en-us , Ric (I've corrected the link as well)

• PC doesn't recognize me as the administrator

  Separated from this thread.

  my windows 8.1 PC doesn't recognize me as the administrator. I can't make changes on my PC settings. Whenever I just pushes the button, it flashes and does not go to the program, including the store.

  Hello

  Please refer following fix and tell us if it helps:

  http://www.thewindowsclub.com/lost-administrative-rights-in-Windows

  Hope this helps, good luck :)

• Re-installation of Windows XP doesn't recognize any hard drive - help

  Hello

  I have model X60s: 17044JU

  I installed XP of origin.

  My computer is very slow and I am trying to reinstall XP from my CD (and the HD format so I have everything clean).

  When the blue screen Windows installations appears and loads the drivers etc then it tells me that it doesn't recognize any HDD.

  I thought that I might need the SCSI or RAID drivers, but since I don't have floppy drive I can not load their.

  How to install new XP any help would be appreciated.

  Thank you

  Miron

  Moderator edit: number masked to prevent improper use.

  go to the bios hard drive mode menu switch from ACHI to compatibility.