PC laptop Touchpad driver HP 15-r006tu problem... :(

Similar Questions

• Touchpad for laptop VGN320E driver

  I have laptop VGN320E. I disabled the touchpad when I used it. I reloaded it with WIN 7 Ultimate. But I don't re - not allow the touch pad before that. I can't seem to find the right driver to get the touchpad working again. I installed the synaptics pointer control and thought that the touchpad driver. Is there any other driver I need to install to get it working again? I'm sure that something will do, but I can't seem to find the answer. Any help would be greatly appreciated. Thank you!!

  Rockstar9280,

  Please check the VAIO Control Center and then turn on touchpad device located inside the mouse.

  1) click Start
  2) click on all programs
  3) click on the VAIO Control Center

  Thank you for your response. I tried to uninstall the driver and then start it again twice. Did not work. I don't know what else I could try. I tried the update of the driver later, and he said that the driver has been updated. It almost seems that the changes I made before is never reset. When I disabled it all first I went to Program files > Sony > Settings Utility Services > device VCCPointing > disable. Since I rebooted the computer, this option is no longer there. So is there a way to get this back? As a utility driver Sony, or something. Thank you. Scott

• Synaptics Touchpad Driver problem - no driver appropriate to be installed (G580 20150)

  I downloaded the Synaptics Touchpad Driver for Windows 8.1 (32 - bit, 64 - bit) installed, but I get this error.
  

  What is Lenovo?

  Nassera salvation,

  Thanks for posting!

  Have you been able to check your touchpad settings before the upgrade if you have a touchpad Synaptics or momentum?

  According to the support download site, G580 could have Synaptics or momentum

  Elan touchpad, according to the support site doesn't have a driver yet for windows 8.1 and still works with the generic Windows 8.1 driver

  

  Concerning

  Solid Cruver

• stream HP 11: touchpad driver does not

  Hello. I have reset my laptop due to problems of storage and the laptop is turned off and the whole process of resetting messed up until the bootmgr file is missing, I downloaded a file of windows on another computer * NOT ORIGINAL * and installed via USB key... Now everything was over some pilots were not available eg.wifi driver, that I had to download but when I reached the syntpatics touchpad driver or so its installed says ready to use, but I see nothing in that only some unknown device in Device Manager tried update and nothing went parameter-devies and still nothing it shows nothing there what should I do... I'm tired of using a usb mouse

  See this.

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• Touchpad HP ENVY 4-1215dx problems

  There are a few problems with the touchpad on my laptop 4-1215dx HP ENVY.  One problem is the bottom of the touch pad, which is used for left and right clicks.  Sometimes the click noise is very loud and sound like something is broken, and the click does not work.  If I put the laptop mode only 'sleep' and leave it for 3-4 hours, everything works when I exit mode "Eve".  I highly doubt to update or reinstall the driver would fix the loud rattling noise.

  The second problem occurs on when you tapoterez the main part of the touchpad to make a right or left click.  I have tap several times, and the click does not work.  It works after taking the laptop out of fashion 'sleep'.

  The two problems are random and cannot be re-created at will.  Due to the loud click noise I think something can be broken with the touchpad or the motherboard underneath.  If the touchpad is broken, can it be replaced or what I have to live with it or get a new laptop?  Thanks in advance for any help you can provide.

  Gary

  Hi @garyg45

  I saw your post about the problems with the touchpad of your wife. From what you described, it could be a hardware problem with the touch pad. I suggest you reinstall your Synaptics TouchPad because it is a solution that requires no disassemble the laptop or send it in for repair.

  Synaptics TouchPad Driver (Windows 7)

  Synaptics TouchPad Driver (Windows 8/8.1)

  If you have had the laptop for less then one year or bought a long warranty give us a call for a repair. You can reach HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

  The TouchPad is a replaceable part and page 54 of your Maintenance and Service of Guide , you will find instructions on how to replace it and the compatible replacement part numbers. Do not do this if you are in warranty, as this leads to the cancellation.

• Synaptic PS/2 Port Touchpad Driver Code 80240016 error

  During Microsoft updates on August 14, 2010, I received this error on my HP Pavilion tx2510us Entertainment Notebook PC.

  Do the following and it will be resolved the problem and the error.

  (1) unstall all the devices in the Manager device/mouse and other pointing under control panel devices.

  Click Start, control panel and click Device Manager (it is easlier to locate Device Manager using the classic version)
   
  Click on the + sign next to the "mice and other pointing devices."
   
  Double-click each list item, and then choose uninstall. When prompted with "Are sure you want to remove this element", click Yes. Repeat this operation for all items.

  Once all items are deleted; Close all open windows and restart the system.
   
  (2) turn off your Antivirus Security Suite for this installation.

  (3) install the driver for the Touchpad Synaptic PS/2 Port/file name sp39279.exe which provides HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-60970-1&LC=en&DLC=en&cc=us&...

  (4) restart the laptop as requested.

  (5) perform an update from Microsoft.

  (6) install the Synaptic Touchpad PS/2 Port driver.

  7-restart the computer.

  (8) perform an update from Microsoft.

  (9) if the Synaptic PS/2 Port Touchpad Driver is identified again. Do not do an update this time.

  (10) restart the computer.

  (11) to perform an update from Microsoft and Synaptic PS/2 Port Touchpad Driver should not appear this time.

  Hey

  Check "Add Remove Programs" or "programs and features" and uninstall the Synaptics Touchpad software.

  reboot PC

  Take Synaptics Touchpad Driver

  Note: Your laptop Touchpad is not working correctly?

  Kind regards

  EverWin

• HP 15-p097tx: Synaptics TouchPad Driver for Windows 7 64 bit (sp69001 and sp67269) does not work

  Hello

  I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please

  Thank you.

  Hi @SushmitMazumdar ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• HP 2000: Synaptics Touchpad driver trouble (installed but does not appear in Device Manager)

  I had a problem with my touchpad for months. The synaptics touchpad driver is installed but the touchpad does not work and does not appear in either (just my external mouse) Device Manager. . I tried various troubleshooting methods, but none worked. Any help would be a lot for me. Thanks (in advance).

  PROGRAMS AND FEATURES

  

  DEVICE MANAGER

  

  Hi @decyferme,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand that you had a problem with the touchpad for months because it is not responding. Although the driver is listed in programs and features in the Device Manager is not listed.

  Have you checked for virus and malware?

  Have you done all Windows updates?

  Have you tried to run the troubleshooter in Windows?

  Did you run HP Support Assistant to facilitate updates of HP?

  First you would try this step.  Some models, you can enable or disable the touchpad by double clicking on the top left corner of the touch pad.  Please see if it is applicable for you.

  Then in Device Manager, view hidden devices and search the hardware changes see if the touchpad now will be seen.

  Here is a link to the HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8) that should help you too.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this gave a solution for you, please choose the solution provided to help others to find.

  Good luck!

• HP ENVY 15 Notebook PC: Touchpad and erratic cursor movement problem

  My cursor shows erratic all over the screen movements while trying to move from one place to the other. This happens when I use my touch pad to control the cursor. After showing the erratic movements, it starts clicking Cesti on the entire screen. Clicks are random, and the movement of the cursor is also random.

  I tried to update my driver and everything, but the problem is still not fixed. Help regarding this situation is very welcome.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click on this link to find several troubleshooting steps to solve this problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• 7558 the touchpad driver/app

  I have an old Inspiron of 2 weeks 2-in-1 15 7558 i5 8G 500GHD. Windows 8.1 running of the factory.

  The problem is that I can't control the touchpad. The biggest problem is the tap to click. The whole buffer including buttons move the mouse and reacts to the tap to click. It's very frustrating, because when I press the button all sorts of crazy mouse click on register or when I try to click on a button, the mouse cursor moves because the button is part of the touch pad.

  All I want to do is disable tap-to-click. When I open Control Panel/mouse there is no touchpad tab nor the controls for the touchpad. In Device Manager, the Mouse/touchpad driver appears as a driver MS Mouse 2008 that seems very wrong, especially now that it is so from the factory. I checked the site driver from Dell for one pilot different both by model number and serial number, no driver of the touchpad or app. I found synaptics, Alps, ealn and Cyprus drivers on the web, but none of them work.

  Any fix for that? Looks like that tactile disabling click should be obvious.

  Thank you

  Don

  > BTW, your link is the 7568-oriented and I the 7558
  Oh, sorry...

  I'm not a native speaker of the English language and then apologize when there is an error.

  Methods that are introduced in this page (www.ryukent.com/.../fixed-install-synaptics-touchpad-driver-windows-8-1), I think it's probably the same way you did.

  and, there is a description that I think is important.

  My system does not display Synaptics tab in the Panel :(
  But
  Run program files \ Synaptics------SynTP------SynTPEnh.exe

  in this case, I think that even if there is no tab for synaptics to control panel, the installation was successful.

  Thus, if the information from the registry on synaptics is saved and customize it, I think it's possible to tap not valid click.

  The registry of my laptop with a synaptics entry is in
  HKEY_CURRENT_USER-Software-Synaptics

  y at - it registers for registration on synaptics in your pc?

  At the same time, either, but this is not a solution, is it possible to use this software?
  Forum.TabletPCReview.com/.../TwoFingerScroll-v1-0-7-Update-Two-Finger-scrolling-Done-Right-more.38405
  I usually use one of the functions that are provided by this software, when you are touching with a finger, clicks when you tap on the other finger.

  in this feature, I make it easier to click after the cursor of the mouse movement with trackpad.
  This software is for synaptics trackpad, so I hope this helps app to use the trackpad on your portable computer.

• Satellite Pro P100 - Touchpad driver for Windows 7 32 bit

  Hello

  I'm looking for a touchpad for my P100 (PSPA4E) driver that works under Windows 7 32 bit. After changing from Windows XP to Windows 7, the tochpad is no longer in effect.

  THX in advance for your help!

  Concerning

  Hello

  Generally for touchpad no additional driver is necessary. The touchpad also works without a driver touchpad as the standard Windows driver will be used.
  Driver Touchpad is more important for special functions as virtual scrolling, change the tapping settings, etc.

  You can download all the drivers of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But to look for in driver * Archives * because he old laptop s model.
  It s no driver 32-bit of Windows 7 available, but I've seen touchpad driver for Vista. It should work on Windows 7 too. :)

  Check this box!

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Hard drive Satellite Pro C650 problem

  Hi, a friend of mine's laptop in me to take a look because he wasn't starting. He was going straight to boot from the network map, so a little thought that it's a dead hard drive. Then, I checked the BIOS and as expected not detected HARD drive. Removed hard drive and reinstall, same problem. Then I tried another working SATA drive I've saved, not detected in the BIOS. I then tried the hard drive of my HP Elitebook 6930p for laptop, yet undetected work.

  Someone at - he fell on this issue before, it looks like a question of Council?

  Thank you

  Vincent

  Hi Vincent

  When you set the BIOS to default settings is the problem persists? Another SATA drive recognized, or not?

  It is not easy to say what the problem is, but maybe is the faulty disk controller.

• Satellite U500 - ALPS touchpad driver for WIndows 7 64 bit

  I have a U500 - 00 X 012 (Australian model) which I've upgraded to Windows 7 64 bit. Toshiba Australia site says to use the Vista 64 bit ALPS touchpad driver. I could not any Vista driver to work with my U500.

  The driver is available from the Toshiba Europe website http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20091112112139.zip

  The driver is v7.105.303.117

  Hope that someone who saves the many hours I've wasted trying to get the touchpad to work.

  Hello

  Normally most Vista drivers work under Windows. You get an error during installation and what happens exactly?

  Another question: why you n t try the driver from the European page? Normally, it should also work on your laptop.
  Check it!