PC power EDF has alumege all alone

Similar Questions

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Player download b/c no point of power but has power point

  Free download of Reader will not install. Here is the error message but I have power point, 10 windows, all new surface pro so new office. With the help of google chrome. Restarted the computer. Still get this message. Any help appreciated thnks.

  

  OK, you seem to be uploading a very old version of the presenter (7), which is not to go with all the rest being new. According to Adobe - Presenter 7: System requirements you need to Office XP, 2003 or 2007, you will not and can not get. Presenter is now up to version 11.  Note that the presenter is not free, even if it has a free trial version. Adobe Presenter 11 - create courses e-learning PPT Slides

• Power Manager has stopped working - BadImageFormatException - resolved

  Moderator note: there is no way to mark a simple/first post as "resolved." I moved from belgam sabermanat 2nd position so it can be tagged accordingly.

  Thanks for the report.

  Z.

  Tale of woe and recovery.

  I recently acquired an i7 ThinkPad x 201 with 8 GB of RAM and 500 GB drive

  I did a fresh install of WIndows 7 Ultimate x 64 with SP1

  I ran Windows Update and applied the fixes about 80 - all the critics and most of the other

  I downloaded the Lenovo system update and install everything except the BIOS updated as the current BIOS is identical to my other x 201 BIOS Version 1.37 (6QET67WW) - I prefer not to do an update of the BIOS, unless absolutely necessary.

  The Manager toolbar of power present in the taskbar, but I can't start to eat.  Or I can it starts application tools ThinkVantage or by pressing Fn - F3.

  Each of them immediately to bring up a Windows error dialog box that says Power Manager has stopped working.  The splash screen appear not at all.  The details are:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: pwmui.exe
  Signature of the problem 02: 1.0.0.0
  Signature of the problem 03: 4f626f8a
  Signature of the problem 04: PWMUI
  Signature of the problem 05: 1.0.0.0
  Signature of the 06 problem: 4f626f8a
  Signature of the 07:378 problem
  Signature of the 08:0 problem
  Signature of the problem 09: System.BadImageFormatException
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  The Version of the file is the same as my other x 201 (1.0.0.0), but the closing date is Thursday, March 15, 2012 02:53:40 while on my other machine is October 3, 2011 23:01:27.  The update is also 15/03/2012 whereas the other machine is 04/10/2011.  It seems that Lenovo rebuilt the package in March 2012.  Manager supply on the other machine says it's 3.64.  The Lenovo site (http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432#power) lists 3.64 but when you go to the download page it says it's 6.07.  I tried to uninstall Power Manager and install the 3.64 one from the download site.  The same problem.  Finally, I uninstalled the power manager and installed the 3.40 version I downloaded when I got to the other machine.

  So, how Lenovo released a package with a picture of the wrong file?

• Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format.

  Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format. I run XP and use Firefox 9.0.1.
  Thank you...

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• How has lost all my passwords that are automatically populated? Can I get back them?

  I used to have all my passwords stored, then it their information automatically. Now he has lost all, and it doesn't have a firefox popup where it asks if I want the preserved Word. I need my password OLD return... I did not and now can't get into many of my sites. Thanks for any help you can give me... I don't have this bar on top either.

  See https://support.mozilla.com/en-US/questions/901716

• I asked firefox to block an image on my blog, but firefox has blocked all images on the blog, there are no images in posts, pages, the theme, each image have been removed from the blog. Is it possible to restore the images.

  Hi, I was working on my wordpress blog that uses the theme "Intrepidity". I wanted to remove a header image I added to the header but could not find a way to remove, so I click right for an option. the option I took was "do you want firefox to block the image? I clicked Yes, and this is the last time I saw a picture on the blog. Firefox has deleted all the images in the blog, even the side bars are gone, the header is not more, every single photo on the post, pages disappeared. The blog is just a shell now. Is there a way I could have restored the blog images. This is the name of the blog:
  http://www.weightlosscontrolreviews.com/

  With the display site, click the site identity button (for more details about what it is to see the How do I know if my connection to a Web site is secure? article), and then click more information. This will open the page info dialog box.

  First, select the permissions tab, make sure that 'Load the Images' is set to allow (default selection should work as well)

  Then select the media tab, and then click the first item in the list. Use the down arrow key to scroll the list. If any element has the option 'Images of block of (field name)' selected, deselect the option.

  This should hopefully solve your problem, but see also the problems that cause to not show images.

  Some add-ons can also block images, for example, if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block images.

• without doing anything, my office has open all folders and files

  without doing anything, my office has open all folders and files

  I should correct that, but I don't know how.  He opened folders and listed files all over my office.  How to bring back the old desktop computer?

• Adobe has replaced all of the icons with the Adobe icon when I try to open programs.

  How I would fix a problem where adobe has replaced all the icons with an adobe icon and when I open the adobe programs is where I must say that it can't open the program?

  Always, always, start by telling us what operating system you use to describe your problem.

  Use it for Vista...

  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions in #1 à #7 at the top.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions in #1 à #7 at the top.

  For Windows 7, use this:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions from #1 to #6 in the upper part.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions from #1 to #6 in the upper part.

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.

   

• OfficeJet 6500 has more All-In-one: network of disabled features

  hP 6500 has more all - in-one E710 gives the message "integrated network capabilities have been disabled contact your network administrator" when I go to network menu.  I rest to factory default and get restarted three times and still the same message.  Powered down of every thing.  Same result.

  Hello @Walt101,

  I would like to help you today to correct the message 'integrated network features have been disabled. Contact your network administrator' on the front panel of your HP Officejet 6500 a Plus e-All-in-One. This feature is programmed into the printer itself and can be disabled under webserver shipped as part of its security printers.

  If you have configured an admin lock on your printer, you must collect the IP address, your printer off and access the printers built-in web server by entering the IP address in the address bar of the internet browser on your computer. Once you access the built-in web server, you can configure the administrator lock settings.

  If you have not set up a lock on this machine to 'lock' the network capabilities, I'll have to send you a private Message with the semi-complete programming reset so that you can win your network of return capabilities. Please check your private Messages for instructions.

  Good luck!

• How to scan a legal document size on the office jet 8500 hp has more all in one that you use?

  I need help in a legal size document scanning, when I try to scan scan only letter size, I do not know how to change the scan of a legal size scan on my officejet 8500 has more all in one printer

  To scan legal-size documents I advise to use the software that must be installed with the printing of HP scanning software. Once you open the scanner, there should be an option on the top of the window to select it scan the area. Choose "Legal (8.5x14)" and continue as usual. You want to scan from the tray as well and not from the ADF. Here is a document on the analysis of HP:

  http://support.HP.com/us-en/document/c03476857

  Keep me posted and let me know if that helps!
  

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet explore 8 has changed all my icons and won't let me access any of my programs

  Internet explore 8 has changed all my icons and won't let me access any of my programs

  Original title: change icons

  Hello

  Method 1:

  You can see the fix it and steps that are offered in this link:

  When you open a file on a Windows-based computer, the file may start another program

  http://support.Microsoft.com/kb/2656106

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• I am now unable to connect to the internet, it seems, that has most all of the icons in my folder/window "network connections."

  It seems that has most all of the icons in my folder/window "network connections." programs can be corrupted, how to restore these

  I have been using a wireless adapter & also I can't access the utility of windows for wireless connections either, the network, I used is not visible on my computer but my laptop can connect to it

  My OS is windows XP home

  Hello

  Not 'obsessed' all history essay for where the penalty is at the moment.

  Here's how, http://www.ezlan.net/wireless.html