PC won't start, MissingOSloader. Vista Home Premium

Similar Questions

• Satellite P200: Screensaver does not start on Vista Home Premium

  Hi people!

  I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

  ChrisB

  Hello

  Can I ask you if you use the Microsoft wireless mouse?
  I discovered that this may affect the functionality of the screensaver on Vista OS.

  Strange!

  Then maybe you should check out this MS article:

  + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
  http://support.Microsoft.com/kb/911895

  Feedback would be appreciated.

• Slow start on Vista Home Premium - Satellite U400-15B

  Hello

  I just bought Satellite U400-15B and am finding it takes very long to start Vista, I went into msconfig and disabled the things I don't use and stuff that I think is not necessary, but it is still having to wait ages before that I can use the laptop. I have enough RAM and processor speed, so I don't think that the specifications of the laptop are a problem

  Is there something that can be done on this slow start, any help would be appreciated.

  Thank you

  Hello

  I think slow start or laptop slow operations depend on good configuration of the OS. I played with this last month and I am now convinced that Vista starts and runs on my laptop.
  I wrote about this in another thread and if you have time look under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  Please let me know what you think of this.

• Cannot start Windows Vista Home Premium. Missing or corrupted system registry file.

  And I don't have the windows installation disc to fix the problem.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• An upgrade on the spot with a Vista Home Premium SP1 won't work...

  My Vista Home Premium has some problems such as the audio service starts do not. Microsoft sent me a Vista DVD but it is SP1 and I installed SP2. It will work yet? I want to perform and the upgrade on the spot, but it does not give me the option to upgrade... just do a custom upgrade which is really just a new facility.

  Any help is greatly appreciated!

  Ryan Ryan Kaskel Internet Consulting http://www.ryankaskel.com/ http://consulting.ryankaskel.com/ RyanKaskel.com

  You will need to uninstall SP2.

  The SP installed cannot be higher than the SP on the DVD; Otherwise, the operating system installed is newer than what's on DVD, and upgrade is not available...

  http://support.Microsoft.com/default.aspx/KB/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Above the tutorial shows you how to do a repair installation.

  See you soon. Mick Murphy - Microsoft partner

• Unable to start boot corrupted files Windows Vista Home premium

  Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.

  Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go

  burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.

• Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

  I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start without doing a new install? The new facility will lose important files.

  Hello

  It's a normal reaction after replacing the hardware that you have replaced.

  The hard drive with the installed operating system contains the old motherboard drivers, etc..

  They must be replaced with the new motherboard, drivers etc.

  You will need to reinstall the operating system and then install the new drivers of motherboard (you should have a diskette of drivers for it), if the new installation does not probably them, that it will not...

  To backup your data > buy a hard drive USB enclosure > put your hard drive in it > plug it into another computer > read and copy your data from it in this way.

  See you soon.

• Vista Home premium erratic start/restart

  My wife has a touch screen of HP under Vista Home Premium.  The machine has a wireless internet connection, and often it does not recognize the connection on a cold, start although it will usually recognize on a subsequent reboot.  In addition, these past few weeks (since she loaded Explorer 9) we get a blue screen with the message BUGCODE USB DRIVER.  The only USB devices she has are his keyboard and wireless mouse.  In Device Manager, they are marked by the little exclamation point indicating a driver issue, but when you try to download the current driver, Windows says that the driver is fine.  And when you stop the machine and bring it up, the problem often - disappears until the next crash.  What gives?

  Hello

  You can configure the computer to clean the start State and check if the third party application is causing the problem. To configure your computer to clean boot follow the link below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When you are finished troubleshooting, follow the last step in section to start on normal startup.

  Hope that information was useful

• Validation in Windows Vista Home Premium at the start: errors and complications.

  I was directed to this forum as a last chance for my situation.  I'll copy what I wrote before:

  First of all: I can't run Microsoft Genuine Advantage Diagnostic Tool.

  With that of the road, I'll try to explain my situation.  Earlier today, I ran in the hope to get rid of some unnecessary files in disk cleanup. Well, he eventually delete most everything out of my C: drive.  So I ran a restoration of the system to an earlier time.  After the restoration, I tried to connect but received a box saying that my Windows Vista Home Premium product key is not valid.  They gave me three options:

  Reduced functionality mode (does not work; see below)

  Enter the product key

  Contact HP - do you have this: they wanted $ 100.

  Now before to get started by offering suggestions, you need to get more information.

  I can't use the reduced functionality mode.  When I click on it, an error with file not found window appears.  The only way I can access my desktop is by going into safe mode, and I can't go in safe mode with network.  So based on this little bump in the road, I was not able to use the tips I found online, because none of those working in safe mode.

  Now there is more.  Frustrated, I tried to follow guides anyway.  So I followed the following steps:

  Step #3 game

  (1) open Internet browser

  (2) Type%windir%\system32into the browser address bar.

  (3) find the CMD.exe file

  (4) make a right click on CMD.exe and selectrun as administrator

  (5) type: net stop slsvc (it may ask you if you are sure, click Yes)

  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  (7) type: Rename tokens.dat tokens.bar

  (8) type: cd %windir%\system32

  (9) Typenet start slsvc

  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  (11) restart twice

  Not only that not solve my problem (since I was in safe mode I was refused permission), but it has created a new problem.  Now when I start my computer normally, IM is more given three options (reduced functionality mode, enter a product key, contact HP).

  Instead, when I log on, an error pops up saying: "Insert the Windows CD or installation DVD into your computer to begin the process of resettlement." Now, my computer was shipped with windows and everything installed by the factory with the sticker on the side of the tower.  I have no Dvd or Cd.

  I've had this computer for almost 3 years and I can not lose what I have on my computer. I have a genuine copy of Windows.  I have no idea what I'm supposed to do now.

  I used these links:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/3561f32a-d581-4DBD-b90e-fd680f970258/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/c9340e5d-7efb-4edd-B256-defa6b997062/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/ae720c35-3C91-4f07-85AD-82d99297cb11

  and many others that I can't find my way.

  I am posting this from my laptop not my computer with the problem.

  Here is the link to the original thread:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/6b962e8b-ff83-4b4d-a3bd-c7d9a8dc2471

  Is it possible that I can fix this?  Can I install Linux or something, just so that I can access my files?  Thank you.

  Hello
  
  Since you are concerned about the data on the drive, I suggest you first backup of data.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files
   
  I recommend you contact the manufacturer of the system to help about it.
  http://h30434.www3.HP.com/
  http://welcome.HP.com/country/us/en/support.html
  http://welcome.HP.com/country/us/en/contact_us.html

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• File sharing between 'Vista Home Premium' on desktop PC and 'Windows 7 Starter' on laptop

  Hello

  I have a desktop under Vista Home Premium PC.

  I would use my laptop, Windows 7 Starter, to access the files/folders on my desktop running.

  The existing guidelines of Microsoft tells me to select one of the three options on the 'Remote' tab in the 'System properties' window, you get to via the settings 'distance' in the 'System' part of the 'system and safety' in the control panel.

  However, the "three options", to which it refers do not, appear on my phome PC or laptop.

  Exactly how you set this to the top!

  Thanks in advance for your help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack MVP-networking. EZLAN.NET

• Failed to start error with crcdisk.sys Vista Home Premium

  Hello

  Windows Vista Home Premium boot failure

  Recently, I was not able to start properly under Vista Home Premium 32 bit.  I was directed to repair Startup that does not seem to solve the problem.

  This is the report I received:

  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:196611 problem
  Signature of the problem 05: BadDriver
  Signature of the problem 06: BadDriver
  Signature of the problem 07:0
  Signature of the 08:0 problem
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  I loaded Windows recovery environment from a flash drive and so many startup repair and system restore will not work. all I get is a "Microsoft Corperation" and a green loading bar that loads without result.

  Before this failure, I started to feel a significant increase of the OS, boot time. then after, I ended in failure to start.

  In addition, Startup Repair said that the cause of this problem comes from a driver. If this is the case, how can I fix this with command prompt in Windows re?

  Any help will be greatly appreciated.

  Hi kook.

  Also, please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/87c702d7-f482-4165-9263-464c0f421485

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can I extract "Chess Titans" of a laptop under 'Vista Home Premium' on a storage key and then play on a HP NetBook running Windows 7 STARTER operating system?

  Is it possible to extract "Chess Titans from a laptop Gateway running Vista Home Premium at a stick of storage and then play the game, on a HP Netbook, running Windows 7 STARTER? Need help!

  Hello
   
  You cannot extract Chess Titans of a Gateway laptop and put it on windows 7 starter edition
  Ttitans of chess is integrated into the operating system and cannot be installed outside.
  Chess Titans is available in editions of Windows 7 premium
   
  See the link
  Learn more about the games in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/learn-about-Windows-games

• Windows Media Center in Vista Home Premium must be restarted every other time I start a video

  Every other time that I select a recorded program to watch, Windows Media Center gives me a message that the drivers are not installed or loaded properly and I need to restart Windows Media Center.  What is happening with this?  I am running Windows Vista Home Premium version and keep my computer up-to-date.

  Hello
   
  There is no option to download the system files.
   
  If scan sfc does not resolve the files, you can follow the rest of the troubleshooting steps in the article to fix corrupt files: http://support.microsoft.com/default.aspx/kb/929833
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Update in Windows Vista Home Premium to Vista Ultimate

  Hi all

  I'm trying to upgrade my windows Vista Home premium to ultimate and I have the original CD for the ultimate, but when I put the CD and to upgrade it won t upgrade and it gives me this message:
  "- The upgrade cannot be started. To upgrade, cancel the installation and choose it to upgrade to a version of windows that is newer than the version you are currently using. »

  And my computer is up to date so I put t understand is something to play or I have to install a clean version of windows Vista?
  And if I have to install a clean version anyway to install windows without deleting my documents?
  Hope someone will help me :D
  THX

  H,

  If you perform a new installation that will be wiped all files, you must back up your documents and other members of staff.