PC won't start-preparation of auto repair. After, there is a message: 'automatic repair is unable to repair your PC' and ' Log: C:\windows\System32\Srt\SrtTrail.

Similar Questions

• Spectrum of HP x 360-13-4009na: Machine starts with "Preparation of auto repair. Cannot reset. "The disk is locked.

  One day the machine started start mode "Preparation of auto repair. I tried to reboot several times, including a hard reset without effect.

  Then I tried to "put this PC" but I get the message "the drive where Windows is installed is locked." Once, he did pass this screen and asked me my credentials for the Windows account but then failed. Now it's to the same message.

  I then tried of the system hard disk diagnostics. The DST short and SMART test passed BUT the long DST has failed with an error code ridiculously long...

  0LPMB9-7LT88D-MFPWMG-61V503

  My conclusion is that this problem is hard disk (SSD) related, but what I can do now.  Needless to say my warranty missed in January 2015 (I think) and the machine is currently blocked.

  Does anyone know what the code above means?

  If it's a SSD failure, how can I get it replaced and then how do I reinstall Windows 10 since HP did not provide support for recovery with the machine, either 8.1 win or win 10.

  Any help appreciated.

  Paul.

  Your long test failed.  I wouldn't replace the drive if I felt it unnecessary.

  You'd better replace but weather that you do it yourself or not, I can't comment. HP has no instructions for your model on the replacement of this player.

  If your comfortable with DIY, go ahead as long as its out of warranty.

  Specs say it has a 256 GB SSD M.2

  Personally, I would like to look at the disc before I ordered one, to make sure that I get the correct type.

  Good luck.

• Whenever I start my computer a black rectangular box appears and says "C:\windows\system32\cmd.exe".

  * Original title: popup?

  Whenever I start my computer, a black rectangular box appears and says "C:\windows\system32\cmd.exe" immediately after a grey box appears saying "Windows cannot find"C:\Users\Amber\AppData\Local\browser extensions\client.exe". Make sure you typed the name correctly and then try again.

  Hello

  It seems to be a left over Malware boot entry that was removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use the System Configuration tool in Windows 8/8.1.

  http://www.7tutorials.com/how-use-system-configuration-tool-all-its-awesomeness

  "With the help of Configuration (msconfig) system.

  http://Windows.Microsoft.com/en-us/Windows/using-system-configuration#1TC=Windows-8

  You can also use this free program to do, too:

  "Autoruns for Windows V12.03"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Just installed 14 elements, but the editor will not start. The notice appearing - Italian - is: Impossibile find it punto di ingresso della procedure nella libreria di special dinamico C:\WINDOWS\SYSTEM32\MSVCP110.dll _crtCreateSymbolicLinkW

  Just installed 14 elements, but the editor will not start. The notice appearing - Italian - is: Impossibile find it punto di ingresso della procedure nella libreria di special dinamico C:\WINDOWS\SYSTEM32\MSVCP110.dll _crtCreateSymbolicLinkW

  Hello

  Update your Redistributable Package VS.

  https://www.Microsoft.com/en-AU/Download/details.aspx?ID=30679

• System does not boot, get the white screen after preparation for auto repair

  Hello

  I have a Toshiba Satellite with Windows 8 and yesterday there were some ongoing update and must restart.  When the computer reboots, it took some time and then I got a blue screen (very quickly) who said something as she encountered a problem and needs to fix (it is really fast and I can't see the whole text).  Then goes and comes back as it is booting (with the toshiba logo) and he says prepare auto repair.  Then it goes to a white screen. I tried to get into the HARD drive recovery (power with F12) and when I select HDD Recovery and confirm Yes, it just goes to a blank screen.  I went into the Setup utility (powering now F2 while) and has chosen default install and who does not either (although it has fixed the problem with my keyboard backlight does not). Support of Toshiba said that it is the operating system, not the hard drive.  But I need a drive recovery media that will scan all.  Anyone know other options?  I have a disc of recovery of a Microsoft coming 8 Pro (dell).  Would it be an option, to use it (I got it on a flash drive) and start-up of that?  Thanks for the help.

  Hi John,.

  Thank you for the update.

  Given that you want to use the Windows 8.1 recovery disk, you won't perhaps able to start Windows 8 using Windows 8.1 because the computer may not be able to find the files of Windows 8 start to recover.

  Yes, you pouvez install 8.1 Windows using the recovery disk. However, you may not be able to perform the upgrade option when installing Windows 8.1. When you click install now and follow the instructions, you must choose the Custom Advanced option to continue installation. Choose Advanced custom options will create a folder in the C: drive (or any other partition when you do not want to install) named the Windows.old folder which expected to have all of your files and documents of previous installation and are accessible.

  Make sure you have the drivers available for the devices installed on the computer as network card, drivers etc. of video card you install Windows 8.1.

  Hope the information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Satellite P200 - 17 c - Vista won't start up - how replace/repair boot.ini

  Hello

  I have a Toshiba P200 - 17 c of the vista computer and it won't start, freezes on the splash screen. I have
  used iso image to boot from and ran repair disk, makes no difference.
  Machine will not get beyond microsoft loading page (with yellowish scroll bar).

  My question is: How can I replace / repair the boot.ini file to get the machine to start or disable all applications / drivers for applications in order to get the machine to start.

  I have not (my fault) create a back up or restore disk.
  After booting the machine from cd, system repair running and try to run the system restore doesn't work...

  Can anyone advise on a way to replace/repair boot.ini or turn off the drivers?

  Try to avoid to pay another £30 pounds for a recovery disc that I already paid for the licensed software, don't know why.
  If you pay because you do not get a copy of Vista with machine...

  Anyway any help would be most appreciated.

  G

  Hello

  > How to replace / repair the boot.ini file to get the machine to start or disable all applications / drivers for applications in order to get the machine to start.
  I doubt that this could be done under Vista cannot modify the boot.ini as on Win XP OS.
  To edit the boot.ini file you must use the BCDEDIT command.
  However, I put t think it would start the Vista correctly.

  In my opinion you have two options;
  You can use the safe mode and might attempt to start the Vista slim or you have to reinstall the entire operating system yet.
  But I doubt you'll be able to start in safe mode if the system repair and system restore didn't work too.

  So in my opinion the last real solution could be the new facility.

  Concerning

• Satellite Pro C850-1FN stucks in the form of preparation of auto repair

  Hello

  I have a Satellite Pro C850 1FN and for some reason it stuck in a display of automatic preparation for startup repair. He will be sitting with the text on the screen, and after 8 minutes bluescreen shows then talk about a problem and then re boot PC.

  The cycle then continues.

  Any ideas greatly appreciated.

  Hello

  It looks like the repair automatic isn t possible.
  Have you tried another HARD drive recovery option?

  The HARD drive recovery process would begin the new system, but also the driver installation and would set the laptop back to factory settings.

  I think that if the system repair isn't possible, your next step should be the HARD drive recovery.
  In case the recovery of HARD drive would not work too, then you should use the recovery disc.

• My PC is always on auto repair at startup and when I try to change things that ot says that he is not administrator

  Hi guys,.

  My PC is always on auto repair, and when I try to change anything, it says that he is not an administrator on my PC. I really really need repair because I have an assignment due soon. Please help me!

  Hi Emily,.

  Thanks for posting in the Microsoft Community.

  I suggest you refer to the position of Justin Kostic, posted on October 29, 2012 and see if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-is-stuck-in-an-automatic-repair-loop/2310c795-d39b-460f-9e4c-c95008e5ce51

  Hope this information is useful, if not let us know with the updated status and we will be happy to help you further.

  Thank you.

• Cannot start the virtual machine guest after receiving "License expired message" host ESXi 5.5

  I can't start computer virtual invited after receiving "License expired message" 5.5 ESXi host. I am able to copy the vm folder prompted with all its files using WinSCP I had already installed on a desktop computer in the network.

  However, it takes an extremely long time to download the VM [2.5 mb/s], which is of course a different question.

  It seems that I was still on the trial with my vsphere client license, until it expired. I am able to view the virtual machine within the workstation 10, but I can't turn it on. It says "Please install a license to power on this computer" there is no way to install a license anywhere.

  My question is... .will I be able to access this virtual machine if I download on an external hard drive, then add it to 10 VMWorkstation that I possess a current valid license?

  Even if the evaluation license has expired, you should be able to connect to the ESXi host using the vSphere Client and follow the steps mentioned in the article that I posted before you enter the free license key.

  André

• HP ENVY TS m6 Sleekbook: HP ENVY TS m6 Sleekbook will prepare the auto repair when booting with Seagate Backup Plus 2 to

  I had problems for some time with my HP ENVY when you restart.   I have a backup Seagate more Desktop 2 TB connected via a USB hub.    When it is connected and restarting the computer, it goes to the screen to "prepare the AutoFix.   So I have to unplug and restart and that's fine.     I don't know why it continues to be.   I checked my BIOS and it should boot from the hard drive first.     Any ideas?

  @mikejenkins1,

  Hello and thanks for the display on the HP support forums.  Using a USB hub, you get a signal from one of the disks is trying to make a repair due to a possible disconnection during a writing session.  You will need to do is a test on the external drives to see if one of them has problems.  Try to make a direct connect with each drive connected by tonight and see if they are the problem on their own.

  If one of them is causing the problem, try and use the test drive of windows.  Here is a link to help you with that.

  Check a drive for errors

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• HP Pavilion DV6: prepare the auto repair

  Hi, I just got more details during Test drive

  Test Drive: 1

  INTELLIGENT control: PAST

  DST short: FAILURE

  FALURE ID: PLM961-5HO815-XDO141-6OSVO3

  PRODUCT ID: LD945PA #ABG

  Hard drive 1

  Test drive: FAILURE

  Can you please suggest what is it?

  Hello

  The error code 24 characters (PLM961 - 5 H0815 - XD0141-600SV 3) is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Tecra A4 won't start no-switches power off after 3 seconds

  Hey all,.

  I really hope you can help me on this. I recently bought a step expensive laptop Toshiba Tecra A4 to Ebay. He said there is a disk failure hard only... it's not.

  When I try to turn on the laptop, the lights come on and the DVD player starts to turn... everything is normal. But then after about 3 seconds it stops before that it can reach the bootscreen - as I would remove the power cable.
  The very strange thing is that sometimes we'll tell every 1 15 try the laptop starts as it should be and start my Linux live CD. Then I can work for hours, and bad don't get passes nothing... until I want to turn it back on. Then the game starts from the beginning.

  I tried already to:

  -Remove the hard drive from default
  -remove the power cable
  -only remove the battery
  -replace the RAM or be one of the two
  -to remove the two RAM
  -remove the power cable and the battery during the night to reset the CMOS

  ... nothing has changed.

  I would be very happy if someone could help me. So far, I have found that the writings of forum without response to this problem in the WWW - if at least I'm not the only crazy :-)

  Thank you very much

  Hans

  > When I try to turn on the laptop, the lights come on and the DVD player starts to turn all normal. But then after about 3 seconds it stops before the splash screen, it can reach

  My friend had the similar problem, but a replacement RAM helped.
  In your case, it might be everything. (motherboard, etc.)

  The BIOS can be updated from windows OS since only based victory of BIOS is available for download The ASP (partner) would update the BIOS but to be honest, I doubt it s a BIOS related issue to me it sounds like a hardware problem

• Lightroom 6.6.1. won't start not on a Mac after upgrading OS to El Capitan

  I use Lightroom since version 3 and never had a problem like this. I've updated my iMac with OS X El Capitan three days ago. After the upgrade I wanted to use Lightroom 6.6.1 but it does not start. It seems that it will start but suddenly it closes without any messages. The next time I try to start Lightroom again it closes immediately, I don't even see the first screen displayed every time that we start a program of Adobe.

  Post edited by: João Alves

  Finally, I could start Lightroom 6.6.1. The problem was with my synched on Google Drive folder structure. I decided to sync less files instead of all records and apparently it was missing some important files to LR 6.6.1 work.

• 15 Ubuntu won't start in VMware workstation 12 after a recent update of Ubuntu

  I'm quite new to the environment virtual system and linux. Someone could me help on my question below?

  I have a virtual system installed using VMware workstation 12. It works fine, until the upgrade of Ubuntu this morning.

  I have no idea what the update installed.

  After the required reboot, Windows VMware has always stop a black page.

  Before everything, there were some posts that I think they should be useful to target the issue here.

  

  He said:

  SMbus host controller not activated!

  No valid rapl area found within the package 0

  Thank you very much for your help!

  -Ninggang

  I found a solution!

  There is problem of ubuntu, new kernel is bad and it's a bug.

  To start again just hold SHIFT while your machine virtual machine to the menu shows ubuntu boot.

  Select Advanced, then choose more old kernel version and that's all.

  After you restart your virtual machine it always start on black screen, you need to delete newes kernel version linux-headers - 4.2.0 - 30 to begin on the old version and problem SOLVED!

  remove the kernel:

  sudo apt-get remove linux-image-4.2.0-30-generic
sudo update-grub2

  reboot.

• XPS 12 stuck on the preparation of the auto repair

  Hey,.

  I have a huge problem with my new dell xps 12 boots go POST but to get stuck on loading windows logo or the preparation of auto repair. I don't know what to do anymore. I tried to boot from USB only legacy enabled it does not start. I'm trying to see if my DRE order can help, but I don't know if it is compatible with windows 8. I can't use F8 F2 and F12 to enterering of INSTALLATION and Startup Options.

  Help, please!

  All,

  I have a XPS 12 that was stuck on "automatic Preapring repair." I had put to sleep it and bought another, I recently met the old an and had a quick Google to see if something had changed! Of course, I came across this:

  

  I opened the XPS 12, reinstall the daughter (removed all connections and reconnected) card, turn on the laptop with a fresh install of Win 8.1 and it installed and everything seems good! He runs a Windows Update as I type!

  Worth a try? Give it a go!

  Good luck!

  Paul