PCI-6052E and SCXI-1520

Similar Questions

• Name of the traditional model DAQ and SCXI-1530

  Hi all

  I'm using Labview 6.1 and 7.1 of DAQ traditional. I'm working on a system with a data acquisition card (PCI-6052E) and several SCXI (1520, 1530) cards. The SCXI cards are installed correctly because MAX can detect all.

  I want to do a program with traditional DAQ that allows to detect all SCXI cards and Show names of model on the front panel.

  I found in Tradtional DAQ, there is a VI entitled "Get SCXI information", which returns the types of models of SCXI cards, something like, 50, 51...

  I found in the help file on 'Get SCXI Information' VI there are some kind of configuration file saying 51 stands for SCXI-1520. What does the acronym for 50?  Where can I find the full configuration file or can somehow I change it? As 51 means something else...

  Any ideas are much appreciated... Thanks to you all!

  This is a duplicate of the last post in this thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=53087

• Calibration of the scxi-1520 and scxi-1314

  I have a SCXI-1000 chassis with the scxi-1520 module and the scxi-1314 terminal block and I was wondering how to do a calibration on it?  What I have to send back them to OR for calibration or I can send it to a local company to perform the calibration?  If I can send it to a local provider, what the procedure would be to calibrate?  According to the manual of the module scxi-1314, everything we do is check the resistance and for the scxi-1520, it performs internal calibration.  Is this correct?

  Ron

  Hi Ron,

  You can send them to OR get these calibrated, or you may have a local company. Manual calibration procedures are available herefor many of our products online. Here are the procedures of calibration of 1314and 1520.

  Other issues on the calibration should be directed to ni.com/calibration.

  Chris W

• Why do my pci-6052e configured as traditional daq and daqmx in MAX?

  I have an old computer of three year with 1 GB of RAM and a 3.00 GHz running Windows Server 2003.  It has already been used for experiments of movement control and has a 7333 motion control card and a PCI-6052E.  Now all I want to do is sample data of a pressure sensor and a flow meter using the PCI-6052E, but for some reason, this card is configured in MAX as a DAQmx device and a traditional DAQ (Leagcy) deivce.  Unfortunately, when I write the LabVIEW 8.2 VI, the only available data acquisition tools are DAQmx and Max my two instruments are installed in traditional DAQ.

  If there is only one card PCI-6052E in the computer, why MAX card PCI-6052E called dev3 DAQmx and a card PCI-6052E dev1 in traditional DAQ?  How can I fix?

  Cpesko,

  I am happy here, you have a few things working under Windows Server 2003.  We do not however have any software under this OS except what is listed here.

  DAQmx and TDAQ are 2 different drivers and this is the behavior expected that devices that support both would be present in the title of each driver.

• SCXI-1520

  Hello

  I have a 6036E PCI data acquisition card. I want to use the SCXI 1520 Signal conditioner for my measurements. What are the accessories necessary for the installation of the SCXI-1520 module.

  Priyank

  Hi Priyankbit,

  You would need to have a SCXI chassis with 1349 SCXI with cable Pin E Series DAQ 68 - 68 (SH68-68-EP) to connect the SCXI-1520 and connected to the PCI-6036E. You may need to have the connection to the SCXI-1520 block to connect your sensors to the SCXI-1520.

  In detail, you can consult the SCXI page.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1604

  I hope this helps

  Kind regards

• limited on PCI-6052E sampling frequency

  I'm trying to measure with two channels with a PC containing a NI PCI-6052E card that is capable of 333KS/s on LabView 8.2. With two channels each channel must be able to 333KS/s / 2 = 166.5KS / s. everytime I try to set the sampling frequency above 94339 Hz I the following warning and the vi no longer works.

  WARNING 200012 occurred DAQmx start Task.vi:1
  Possible reasons:
  Clock speed specified is greater than the maximum ADC conversion rate. ADC invaded errors are likely.

  If I place a similar task in the Measument and Automation Explorer and I can easily make two channels measures to 160kHz without error. Above 166kHz I start getting the same caveat (200012). The code that I use calls first DAQmx create Channel.vi, then DAQmx Timing.vi and finally DAQmx start Task.vi. Everything works fine and I did measuements, but I can't rise above 94339 Hz sampling rate even if it should be possible.

  I just looked and I can't understand the issue here.

  Dear Voyn,

  I thank very you much for your message on our forum. If you create a task for a single channel, you can get a higher sampling rate? Are you able to reproduce the same problem with an example from the finder example? Go to hardware to go end tab selected and output-DAQmx online-online-online-online Acq Cont voltage analog measures & chart voltage-Int Clk.vi

  You can select several channels as well. If it shows the same behavior; which driver DAQmx do you use?

  Best regards

• Using the SCXI-1520 module for measurement of torque

  Hello

  I'm working on a project that requires a measument couple in real time on a speed-shaft drivetrain configuration phase.

  I have the SCXI-1520 module, and I think with a with a configuration of full-bridge strain gauge to do this.

  The problem is that it is not possible to connect to a real-time measurement, so my first solution was using some sort of wireless transmission to receive data in the SCXI-1520 module

  The Arduino + Xbee seems to be the best way to go, but at the same time, I think I might have a few problems of conditioning of the signal while transmitting data to LabVIEW through the SCXI-1520.

  Don't you think it's the best way to do it, or is there a better solution?

  Thank you!

  Hi Kenny,

  What type of operating system are you using? When you say 'Real time', do you mean look at a signal when it occurs? If you use communication networks, you will not be able to get truly control in real-time because communication networks is not deterministic, and you cannot guarantee the synchronization.

  If you try to get a signal and he discovers that you buy it, you should be able to use the Arduino and LIFA with LabVIEW. Adding the SCXI-1520 will not add any additional resolution in this circumstance.

  Best regards

  Anna L

• The PCI-6052e does support I2C or SPI communication?

  Currently, I am trying to build a data acquisition system to test, among other things, SPI and I2C devices verification of characteristics and surveys of behaviour without advertisement above the different temperatures.  The DAQ card that I use is the PCI-6052e as well as the SCB-68.  It has 8 ports DIO, but can someone tell me if it will support SPI or I2C?  Another post in the forum indicated that it will not support 16-bit SPI, but for my application only 8 bit is necessary.  I am not opposed to research in other materials DAQ, such as the USB-8451, but would like to see if the 6052e can do the job first.  If she can't, then my next question would be; Can the 6052e and USB-8451 operate in parallel which allows me to use both analog and digital functionality?  Thank you

  If you will try little he hit then you might find these links useful:

  • SPI digital waveforms reference library
  • Protocol series Communication design reference for devices of digital signals

• Rear connector of the SCXI-1520 module as input?

  Good morning,
  
  Regarding connectors on the SCXI-1520, is it possible to use the rear connector as a 68-pin input (instead of an output)? 
  
  I have the following hardware and wanted to know if it's feasible to pipe a signal from an SC-2345 to a PC through the path below.
  
  NI SC-2345 (Signal Cond. Block)  --> NI SCXI 1520 (Universal Strain/Bridge) via 68-pin cable   -->  NI SCXI 1600 (USB Digitizer Card) --> PC
  
  Thanks
     
  

  Hello hma1,

  Unfortunately, you will not be able to do.  The only "entry" would be taken in chassis cascading signals.

• Portege 7020 error message: PXE - E01 PCI vendor and device ID do not match

  Hi all

  I get this error message (ID PXE - E01 PCI vendor and device do not match) when starting, when I use my portege 7020CT on a cd-docking station. The error message occurs only when I boot with the power adapter.
  I know what means the error message, and I tried to change the boot priority and the BIOS update. None of that helped him. I can't say when the error occurred since I used a LAN card wireless for a long time.
  The ethernet LAN for now, so im card dosnt work using an ethernet pccard.

  Toshiba has released a "patch" for this problem but only with the station of transhipment on the DVD, I also tried, but it didn't work either.

  What seems strange is why the problem only occurs when the power supply is turned on?
  When the message appears, the screen is locked and I can not pass.

  hope someone can help me.
  / Dreadeye

  Hello

  Well, you're right. This message is displayed if it of not possible to boot from LAN.
  In this case, it s advisable to change the boot priority.
  But it seems that you have already tried to change this option. It s very strange questions because it s occurs only if the power supply is turned on.
  I n t really have no idea, but I found this site:

  http://support.Intel.com/support/network/adapter/1000/sb/CS-010508.htm

  Try installing the latest Boot Agent. I put t know if it helps but you can try it.

  Good luck

  Good bye

• Satellite M40X driver PCI Device and NetworkController problem.

  Hello..

  I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
  Any suggestion on which driver files may resolve this problem.

  Thanks in advance
  Shine

  Hello

  As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.

  Good bye

• Yellow brand - PCI Device' and 'Network controller' on the Satellite A100-787

  There is a yellow question mark in Device Manager for a pilot called "PCI Device" and also for "Network controller" even if the network (LAN) connection is working well and all the other computer functions seem to work well.

  What are these devices?

  The second device appears to be a LAN or WLan card. You should check if one of these cards were not installed under network adapters.
  The PCI device can be a card reader. Check this box too.

  But I really don't understand why these yellow exclamation points appear in Device Manager. I assume that you have installed all the drivers available. Did you?
  Please check if some drivers were not installed.
  If so, then download and install!

• PCI device and SM Bus, MISSING controller and impossible to INSTALL - HP Pavilion g4 1264ca

  I had recently done a clean install on my laptop and when I rebooted, it was missing the drivers for the PCI device and SM BUS controller. When I go to Device Manager and try to reinstall or search the hardware changes, my computer is unable to install. Also, I was missing my network Ethernet and wireless drivers, but I installed the appropriate via the HP website drivers. However, still miss me these two pilots. I tried to install on my laptop, but just AMD chipset, which creates more problems because once the program asks me to restart the computer it remains stuck to the Windows loading screen (rotation around the Windows logo colors). If someone could find the right drivers for me download or ways to diagnosis this problem, any help will be greatly appreciated.

  Laptop model: HP Pavilion g4 1264ca

  Hello:

  You should definitely the amd chipset drivers to install the smbus controller.

  Here's what I've done for you...

  I have zipped and attached just the driver files raw you must install manually only under attachments below smbus controller.  As you saw that the chipset driver file contains a lot of other things as well.

  Unzip the files in a folder.

  Go to Device Manager and click the controller smbus needing drivers.  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.   Then restart.

  The PCI device is the card reader that needs a driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&product=5186397&sw_lang=

• PCI device and unknown device (code 28)

  After the installation of Wind8.1 my Hp 250 G2 (FOY89EA #ABE) lost the PCI device and when I connect to HDMI or VGA, no image is produced on the TV. How can I solve this problem?

  You are the very welcome.

  You need this driver that is not on your PC support and driver page...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124774_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.