PCI-DIO-32HS error FFFCB820 (-215008)

Similar Questions

• PCI-DIO-32HS on Windows 7?

  Hello

  Is it possible to use the PCI-DIO-32HS with Windows 7?  If so, can you direct me to the correct driver to install?

  Thank you.

  Hi aaron.cramer

  There is a traditional DAQ driver for Windows 7. The driver does not work for 64-bit operating systems.

  This link describes the limitations of the driver and download links: http://digital.ni.com/public.nsf/allkb/8EC9E81C3DE4E619862573930083BD7A

• Maximum latency to read/write for PCI-DIO-32HS with NOR-DAQmx?

  I was asked to evaluate using the PCI-DIO-32HS and NOR-DAQmx on MacOS X to essentially close a control loop.  My first concern is whether or not it can run fast enough.

  So my questions are: what is the maximum latency from the moment of receiving a signal strobe reading data from external hardware, then read a single 16-bit sample and sending it upward by NOR-DAQ to a user space application?  And, similarly, what is the maximum latency of sending a unique 16-bit value from a space application user down through NOR-DAQ, then write a port and affirming a strobe signal of external-data writing material?

  Thank you.

  Hi AliasMe,

  Thanks for posting and welcome to the Forums EITHER!

  Do you need to process the data in the software and generate a value on this basis?  DIO-32HS (alias PCI-6533) offers in the buffer of inputs and outputs, but you'd have a latency in your control system relying on the OS to do treatment.  Since this period is dependent on the system, I can't give a specification for the amount of time it would take.  However, integrating data in memory, processing and writing back to the card would likely be on the order of several milliseconds.

  Generally, we recommend FPGA in situations of control like this, so you can do all the processing in hardware.  However, if provide you more details on your request we can look into all the options available.

  -John

• 10401 DIO port PCI-DIO-32HS config error

  
  
  

• HP Pavilion m6-1045dx: update the bios y dios UN error

  Update the bios y dio UN error desde the pagina driver busque bios desde php the instale y y is reinicio pc sola y is quedo pantalla negra pero el equipo lights are una portatil HP Pavilion m6-1045dx

  Ayuda than devo hacer para las dress bios?

  @David- 100

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• PCI-DIO-96 - OEM IBM

  Dear support,

  I got my hands on some PCI DIO 96 maps in scraps of IBM tape libraries.

  These cards were inside a special device PC running OS/2.

  The card IBM partnumber is: 19 p 5156 (OEM 068-02369-0000)

  Is there anyway that I can run these cards under Windows?

  I suspect there is another 'firmware' inside the map, because it does not load the driver correctly.

  Said driver Windows Manager: could not start the device.

  I use NEITHER-DAQmx 9.0.2.

  Some PCI card info:

  PCI\VEN_1307 & DEV_0054 & SUBSYS_00541307 & REV_02\4 & 258F4AE7 & 4040

  Thanks in advance.

  H. Haken

  Netherlands.

  Hello h. Haken.

  I did some searching on Google with the provider information you gave. There are a few other manufacturers who use the same name (PCI 96 DIO) for their cards. With the vendor information you gave, I came across the site of calculation of the measure .

  In the end, we can conclude that this device is not working under the DAQmx driver. Please contact the manufacturer for the correct driver.

  Best regards

• Integration of material NI_DAQ and NOR-DAQmx software on the same system PCI-DIO-96

  Hello

  We have a great system that is developed in VB and uses the traditional inherited NOR-DAQ system. The system controls the controller PCI-DIO-96. We would like to upgrade to some parts of the system to NOR-DAQmx and use VB.Net and we know that you can install both systems together on the same computer.

  We have a few questions:

  (1) once the legacy of NOR-traditional DAQ OR DAQmx software can be integrated in the same system. Some parts of the system will always use the VB and the other parties will use VB.Net.

  (2) if the answer to the first question is Yes. Are there hardware or software limitations? Is there a recommended way to integration?

  (3) are there articles based on the knowledge about it?

  Thanks Jeremiah

  There are a number of limitations to the use of NOR-DAQmx and NOR-DAQ traditional at the same time.  First of all, only one of the drivers can access the device at a time.  To switch between the drivers, I recommend that you read this knowledge base Article: that I can use OR-DAQ traditional (old) and NOR-DAQmx simultaneously?  You will need to use the equivalent functions of VB .NET to switch between the pilots.

  In addition, the system should use Windows XP or an earlier version.

• What is the connector 100 OEM part number used on the PCI-DIO-96 map pins?

  I have a PCI-DIO-96 card and I want to make my own custom cable to connect to the connector of the OID 100 i/o pins.  However, I can't find any reference to the reference OEM of the connector used on the PCI-DIO-96 Board so I can order his companion.

  If anyone knows of any information about the connector part number 100 pins used on the PCI-DIO-96 Board, I would be very happy to know this information.

  Thank you.

  Well, I found earlier the information I was looking for...  Page 1-3 of the PCI-DIO-96 manual (section "Custom wiring").  FYI, I have the March 2009 edition of the manual.  (it helps to actually read the manual, huh?)

  In this section, two OEM mating connectors are suggested:

  Company AMP (P/N 749879-9)

  Honda Corporation (Ref. PCS-XE100LFD-HS)

  I went to the website of the GPA.  There are actually two AMP parts active that do the trick... the P/N given in the PCI-DIO-96 manual map is the non-RoHS connector version.  The compliant version RoHS/ELV of this connector is AMP P / N 5-749879-9.  (Note than the previous one "5" in the part number)

  For the purposes of referral, the connector is a series of 0.050 "SCSI cable insulation Dispalcement Connector [CID] (100 pins to 0.050" Ribbon).

  In the United States, Heilind Electronics (http://estore.heilind.com) carries the AMP part.  Minimum purchase is six parts.  At the time of this announcement, they have a few hundred in stock.

  If all goes well, that helps other readers.

  -Mike

• Center solutions Lenovo (app) PCI Express hardware error reports

  The diagnostic Center Solution Lenovo software reports error PCI Express WPE001001-WL7X2I material. The yoga of the Thinkpad X 1 seems to work otherwise. Everyone knows about this problem? Require a repair or replacement?

  Thanks for any advice.

  If the error happens when material test, then you should not worry happens to me on a x 1 carbon 3rd gen idk why but for some strange reason, it gives just by failure on the part of the PCI-e what so ever if you run the test time 2nd or 3rd it should give a green pass icon.

• PCI-6115: no error is raised when a buffer overrun occurs

  Hello

  We use a PCI-6115 continuous acquisition to 10 MHz mode.

  We read samples in blocks of 10e7 samples (i.e., by blocks of a second). Before you read the samples using the 'Daqmx Read analog 2D I16 NChan NSamp' VI, we check if the samples are available using the property "Daqmx Read--> status--> samples available by channel":

  • If 10e7 samples are available, we call the 'Daqmx Read analog 2D I16 NChan NSamp' VI with timeout =-1.
  • If not, we wait a few milliseconds and retry.

  Unfortunately, we didn't intercept errors related to buffer overflows. I mean, I did some tests. And when a buffer overrun occurs, instead of getting an error related to a buffer overrun, the property "Daqmx Read--> status--> samples available through" simply returns 0 indefinitely.

  This behavior is not what we want. We want something solid to detect buffer overruns. Is there a VI or property to check if a buffer overflow has occurred?

  Instead of testing ourselves if samples are available, is it best to let the 'Daqmx Read analog 2D I16 NChan NSamp' VI do with timeout =-1 directly?

  Thank you

  Kind regards.

  xRed,

  I don't have the equipment to test this at the moment, but I think DAQmx's task Done.vi go do what you want.  The problem with the help of samples available by channel property is that it is valid to call it when the task is technically done (error, or after the acquisition of all of the samples in a task finished) to determine how many samples can be read.  As the error you have is a buffer overrun, there is no samples that can be read safely, the query returns 0.  In your case of error, I expect that DAQmx is task Done.vi would return True for 'task performed?' output and the error you code were expected since the release of "error".

  Hope this helps,
  Dan

• ENVY of HP TouchSmart m6-k015dx: pci express root error complesx

  My product id is TouchSmart from HP ENVY m6-k015dx showing pci express root complex error please tell me how to solve and I can add dedicated graphics in this laptop if yes what is the best for this laptop?

  rajan3 wrote:

  My product id is TouchSmart from HP ENVY m6-k015dx showing pci express root complex error please tell me how to solve and I can add dedicated graphics in this laptop if yes what is the best for this laptop?

  I made a simple search for HP and found this:

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/unknown-device-on-PCI-Express-root-complex/TD-p/4765843

  See if works...

• reset the error 50002-6533

  Hello

  I use a card PCI-DIO-32HS (NI 6533). An error occurs while writing data to the card, after which I can't reset the map using the tools DAQmx or (reset devic) MAX (DAQmx). I always get "error-50002 occurred to resetting the device. A self-test on the device works. The only way to use the card is to restart the computer, which is quite irritating when you search the bug. Is there another way to reset the map without having to restart the computer.

  Add. Info:

  Windows XP SP 3, LabView 8.0

  See you soon.

  Hi Bernard,.

  I know that you can force windows to delete and detect a usb device, and I wonder if you can do the same with a PCI card.

  http://digital.NI.com/public.nsf/allkb/1D120A90884C25AF862573A700602459?OpenDocument

  I wonder if this is useful. It certainly looks like the way you code. I heard sometimes use the reset device.vi twice in LabVIEW can help, but I've never tried it personally.

  I hope that you manage to tackle the issue of coding you have!

• Identify a DAQ card

  I got a PCI card that has been placed in a box with a personalized label of the PCI-DIO-32HS. I took it for that. Tried to install it in windows using NiDAQ drivers but it is not detected. Windows detects it as a multimedia video controller and measure Automation recognizes an unidentified device in the device options and Interface. The card has a DB-15 connector and a BNC connector. On its rear that b REV 15381 P/N is printed on the circuit board. A bar code label on it says 15380 DT3155 V REV A. How can I identify this card?

  Sorry for the inconvenience. It wasn't an acquisition of data. It was actually a monochrome image capture card. Thanks for the support.

  http://www.CMC-KUHNKE.com/products/default.asp?ID=jmmqdqcse&l=en

• P65570

  I have an old card board. Brands only I see is "P65570". It's a card with a grid 50Pin connector used to connect a PCI-DIO-32HS card via a ribbon cable.

  Does anyone know if this Board was never made by National Instruments?

  I'm looking for a description/Schematic of what makes this forum. Any help would be appreciated!

  Kind regards

  AK

  The "P65570" does not appear to match any of the products from National Instruments. You will find the part number of the Board of directors or its model number?

  Thank you

• Error 10461 / 10008 @ DIO Port Config (legacy, lvdaq.dll)

  Hello!

  In my company, we have many tests in Paris, all controlled by an extraordinary Labview (compiled) program and the PCI-DIO-96 cards.

  I changed and compiled the program several times in the past and did not have a unsolvable problem before.

  But now the Port Config.vi DIO (lvdaq.dll) always shows me an error 10461 (recource not availabe) when I want to run it.

  It is used to control the DIO-96 cards.

  So I thought that it is a problem with my DAQ / DAQmx Config on my computer that had changed several times. But the strange thing is that the Version compiled on the Paris test shows the same error today and their configuration has changed.

  I have checked and double-checked everything at least twice (numbers device ect.) but I don't know how to solve this problem!

  My Cfg.: DAQmx 8.9, 7.4.4, Labview 8.6.1 DAQ & compiler

  Thanks in advance for any help with this problem

  There is a known compatibility issue between the traditional DAQ driver and DAQmx 8.8/8.9 with old devices DIO. The DAQmx 8.7.2 driver rather than the more recent installation should solve.                                                                                                                                                                                                                                                                                                                                                                                                       http://Joule.NI.com/nidu/CDs/view/p/ID/1087/lang/de

  Andrea Perin