PCI not found after the failure of the system on the Satellite L25-S1217

Similar Questions

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Error 404 - not found - after the installation of Essbase 11.1.2.2

  Hello
  
  I encountered error.
  
  I have a box of PMC 11.1.2.2 using Windows 2008. After the installation of Foundation and configure it, there is no problem at all. I can open workspace and interop as well.
  However, I added Essbase, installation and configuration of it. But after installing Essbase, I managed to turn it back on Hyperion Sharing Service, it did not work.
  
  The error that says:
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  
  What I did is also a reconfiguration of shared services, Essbase. But no luck at all.
  Does anyone have any idea, please advise. Thank you.

  Sometimes, this error may be because the data source details are incorrect that I showed you yesterday in WebLogic.
  I don't know how you managed to cause questions to the Foundation after the addition of essbase as I do not have the process that you did.

  If I go to WebLogic and change the user to the EPMSystemRegistry data source and then start the server EMP service the same errors are generated.

  <15-Jun-2012 08:32:58="" o'clock="" bst="">
  ".>

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Re: Unable to use webcam - not found in the Satellite L670 Device Manager

  Hi, I'm french, sorry for my English.

  I can't use my webcam. not cam in Device Manager.
  I have download the latest drivers and it installed.
  I looked in the bios, cam is on, I am trying to turn off / restart / turn on. Updated BIOS updated.
  facial recognition work to, say "use by another program or not found" something like that.

  Can you help me?

  Thank you

  Hello

  It s not recognized in Device Manager?
  You have a few unknown devices in Device Manager?

  The webcam should be included under point: imaging devices
  You should see peripheral USB video.

  You see that?

• Windows xp sp3 system root of the Hal.dll error or not found after auto update of windows system corrupt does not load.

  12/07/2011 my system automatically downloaded a system update and rebooted when it restarted, it wouldn't load windows and gave this error message. What should I do? I tried to remove the hard drive and put it on another computer if I could look at the problem but I don't know what to do to fix. My backup information are on another hard drive in the original computer. I use Norton 360 for my backups.

  It is extremely unlikely, there is nothing wrong with your file hal.dll despite what says the error message (do not try to replace).

  It is extremely likely that XP just cannot find the fine hal.dll where it says to look for.

  XP is maybe not able to find the file, it's file system is corrupted (Norton that sometimes), or if your c:\boot.ini has somehow become corrupted and told XP to find files in never never land.

  You must first run a chkdsk /r on your distressed HARD drive and if that does not do it, you have to redefine your boot.ini file.

  If you have the drive in another machine, you can open the file c:\boot.ini with a text editor and copy/paste the content back here for analysis.

  You can also rename your file c:\boot.ini to something like c:\boot.ini.bak (so now you do not).  In a single partition installation, XP is not even a file c:\boot.ini to start.  He'll complain briefly, but always begin (unbelievers - try it).

  t can take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  I'll keep an eye on your Norton since when your charge again, Norton System may corrupt your file system again and you will have to repeat the chkdsk/r to repair (so you can set Norton).

  I put the drive in the original system and fix it there with the XP Recovery Console.  After all, it's where he has to work, right?

  If you have any bootable XP installation CD authentic where you can start the XP Recovery CD of Console, you can make a bootable CD from the Console of the Recovery XP (no XP media required).

• Disk drive not found in the Satellite P845T-102 (Code 19)

  Hello

  I recently bought a Satellite P845T-102 and the disk drive is not recognized by Windows (Windows 8). Does not appear in my computer, has no light and will not eject.

  The drive is a TSSTcorp CDDVDW TS-U633J.

  This is the first time I tried to use it so I don't know if it was never acknowledged, or if a windows update caused a problem.

  Troubleshooting it says my driver is up to date, and Manager of devices displays the following message is displayed:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I have tried to uninstall the device in Device Manager and rebooting without success and have also tried to download the driver on the Toshiba site.

  I would appreciate any advice to help solve this problem.

  Post edited by: gt79

  I put t know if this will help but check please - http://support.toshiba.com/support/viewContentDetail?ct=SB&soid=445782&ref=EV

• I get this "application not found" after file uploading a file .zip, changed my anti-virus, but it still does not

  Original title: "application not found" after the file download

  Windows 7 HP pavilion HPE.

  After a file download (zip file), I get the above message. I can download and open Rar files very well. running norton antivirus, try turning it off to see if it is interfering, same problem. any help is appreciated...

  Hey Liindajean,

  The association of files with .zip files may be damaged. Try to use the information provided in the response of the thread below links to solve this problem.
  Windows 7 unzip problem

  Hope that helps.

• Photoshop CS6 not found after downloading and putting in the serial number

  Photoshop CS6 not found after downloading and putting in the valid serial number. Only the extended version will appear as available. How I just downloaded photoshop CS6 only?

  Thank you!

  If you follow the 7 steps you can directly download a free trial here: Download Adobe CS6 tests: direct links (without Assistant or Manager) | ProDesignTools

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• ODI-1222: start failure on agent edge internal: logical schema was not found in the main repository.

  ODI-1222: start failure on agent edge internal: logical schema was not found in the main repository.  but when checked that all the logical schema is perfect

  because of this session is failing.does anyone have the solution to this problem

  Hello

  Do you have the logical schema of the you configured for the respective physical server and assigned the same context. If not, please set up and re - test your work.

  hope this can help you

  Kind regards

  Phanikanth

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos

• "the file is not found" after apple update.

  "the file is not found" after apple update.  Before the update, I've drag only the pictures I want to edit iPhoto to lightroom and change them.  However, after I upgraded apple iPhoto photos, there is no connection between my modified pictures and lightroom and I get the above message. I know where the photos are (in the content of the packaging of my iPhoto library).  However, when I try to find photos by clicking on the exclamation mark (on the thumbnail of the photo) which means that the photo can be found, I can't open the iPhoto package content.  does anyone have a solution?

  I recommend that remove you the Photos app entirely.

  File > PlugIn options... > import from iPhoto.

  However. If you want to continue to manage with Photos AND Lightroom, you can create an alias of the Masters record (in the package contents) and place it in a suitable place. Lightroom will be able to see this file in the import dialog box.

  Locate one of the images that is missing and it should be able to locate the others.

• I receive the error RE5DX9.exe - Ordinal not found after installing Resident evil 5.

  Original title: error message

  Hai I use windows 8 pro recently I installed resident evil 5 on my pc, I get an error ' "RE5DX9.exe - Ordinal not found." " Here is the error in the event viewer. The 5297 ordinal not found in the dynamic link library xlive.dll. "How to solve?

  Hi Adhithyaraja,

  I suggest that take you a look at the existing thread resident evil 5 in xboxlive.dll the ordinal not found error that describes exactly the same problem and a possible solution (RyanT response - Support Engineer, October 5, 2009).

  Hope this helps and solves your problem. If Yes please mark your post as answered if this can help others in the community - thanks in advance.

  See you soon,.

  LZ.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• AutoCorrelate not found in the DLL

  Hello

  I get the runtime error after when I try to use the function AutoCorrelate in Labwindws 2012.

  Function AutoCorrelate: (return value is-5094 [0xffffec1a]). Function not found in the scan DLL library.

  I have included advanlys.h at the top of my function and added the LFP to advanced for my custom libraries of CVI analysis.  I am tring to use the sample code I copied and pasted from the online help documentation.   I can't locate the corresponding advanlys.dll the advanlys.h wants to make reference.

  Example code below:

  #include "advanlys.h".

  Double x [256], rxx [512];

  int n; n = 256;

  Uniform (n, x, 17);

  AutoCorrelate (x, n, ALGORITHM_CORCOR_NO_NORMALIZATION, rxx);

  Same here, but I noticed that my sharing folder is the same as my old CFS files developed with CVI 8.5.1.

  CVI shared Dir = "/ C/Program Files (x 86) /National Instruments/Shared/CVI.

  I looked more closely in this folder structure and concluded that:

  C:\Program Files (x 86) \National Instruments\Shared\Analysis

  published the nianlys.dll of CVI 8.5.1.    My new installation of 2012 has made this squash a copy later.

  Maybe it's the first of many cases where older versions with new conflict.    I regret trying to keep the old version of the CVI on this machine to support the previous facility.

  Thank you for leading me in the right direction!

  Best regards

  Phil

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.