PDC as a NTP server with no external link WAN

Similar Questions

• How to configure vCenter Server with an external smtp server?

  Is it possible to configure vCentere Server with an external smtp server?

  In our environment, we must configure vCenter server to send email alerts when the alarms are triggered. We use the google apps (smtp.gmail.com) server as our official email server.

  I know the steps to do the same?

  You must authenticate external messages. Here is one of this tutorial. http://paulgrevink.WordPress.com/2011/02/06/configuring-vCenter-for-email-with-SMTP-authentication/

• Can I associate an image in a slide show with an external link?

  I tried to link one of my images in a slide show with an external link. However, when I select the image in the slide show or its thumbnail, the "Link" option in the toolbar is not available. Is there another way to achieve this?

  Hi Avary.s

  I'm afraid, you can't have the link added to the image itself, so when you use slide shows you can ask for the link to the container either in the image of heroes. To confirm please take a look at this short video: http://projectuni01.businesscatalyst.com/screenshots/2013-02-15_2208.swf

  As the sticker is concerned, you have added to the thumbnails link check:

  http://projectuni01.BusinessCatalyst.com/screenshots/2013-02-15_2210.PNG

  Hope the helps of information.

  Concerning

  Anshul Sharma

• PIX to function as an Ntp Server

  Hi all

  I ask you if the pix can act as an NTP server with software Version 7.0?

  Thank you & best regards

  Igor.

  No, the PIX OS 7.0 is still just a NTP client!

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a008045277f.html#wp1484669

  sincerely

  Patrick

• ESXi 5.1 configured as a NTP server, do not sync with the Local PC

  I have a 5.1 ESXi server configured as an NTP server and a Windows Server 2008 R2 local PC that are not sync.  I understand well, it is not recommended for ESXi, but I read [1] [2] that, whenever an ESXi server is running as a client, it also acts as a server, so I enabled as a NTP client in vSphere by ticking the NTP client, adding some servers to the server list, and then click on run, and I also activated the 123 incoming/outgoing port by adding the shell of ESXi firewall settings.

  I'm pretty sure it isn't a firewall problem.  I completely disabled the firewall on my local PC.  Running "w32tm keyboardists computers: - IP address of the server -" give me the time of the server and running the software NTPQuery gives me an answer back on port 123 of the server time.

  I tried:

  - Date/time settings (right-click on notification area-> set date/time-> Internet time-> set as the IP address of the server) - sync fails (* an error has occurred while Windows timed with - server IP-*)

  - Group Policy Editor (Computer Configuration\Administrative Templates administration\systeme\service Time Service, currently disabled but because I heard this causes problems) - synchronization fails

  - The registry editor (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\settings) - synchronization fails

  - Command prompt, using:

  w32tm /config /manualpeerlist:-IP of server- /syncfromflags:MANUAL /reliable:yes /update
  net stop w32time && net start w32time
  w32tm /resync /rediscover
  
  
  

  This updates the registry properly, but the outputs "the computer did not resync because no time data was available."  And when I use the command "w32tm/query/source" the source is always "The local CMOS clock."

  Here is the output from w32tm/query /configuration

      [Configuration]
  
  
      EventLogFlags: 2 (Local)
      AnnounceFlags: 5 (Local)
      TimeJumpAuditOffset: 28800 (Local)
      MinPollInterval: 10 (Local)
      MaxPollInterval: 15 (Local)
      MaxNegPhaseCorrection: 3600 (Local)
      MaxPosPhaseCorrection: 3600 (Local)
      MaxAllowedPhaseOffset: 1 (Local)
    
      FrequencyCorrectRate: 4 (Local)
      PollAdjustFactor: 5 (Local)
      LargePhaseOffset: 50000000 (Local)
      SpikeWatchPeriod: 900 (Local)
      LocalClockDispersion: 10 (Local)
      HoldPeriod: 5 (Local)
      PhaseCorrectRate: 1 (Local)
      UpdateInterval: 360000 (Local)
  
  
    
      [TimeProviders]
    
      NtpClient (Local)
      DllName: C:\windows\system32\w32time.dll (Loca
      Enabled: 1 (Local)
      InputProvider: 1 (Local)
      AllowNonstandardModeCombinations: 1 (Local)
      ResolvePeerBackoffMinutes: 15 (Local)
      ResolvePeerBackoffMaxTimes: 7 (Local)
      CompatibilityFlags: 2147483648 (Local)
      EventLogFlags: 1 (Local)
      LargeSampleSkew: 3 (Local)
      SpecialPollInterval: 900 (Local)
      Type: NTP (Local)
      NtpServer: -IP of server-,0x1 (Local)
    
      NtpServer (Local)
      DllName: C:\windows\system32\w32time.dll (Loca
      Enabled: 1 (Local)
      InputProvider: 0 (Local)
      AllowNonstandardModeCombinations: 1 (Local)
  
  
  

  Any ideas?  Thanks in advance.

  Your ESXi server response shows that the leap indicator is 3 and the server stratum is 0.

  This means that ESXi NTP server is synchronized and unable to provide a valid reference time to customers.

  We recommend that you configure your ESXi host with valid upstream NTP servers such as:

  0.vmware.pool.ntp.org,1.vmware.pool.ntp.org and 2. VMware.pool.ntp.org

  as described in the KB article or alternatively your internet service provider NTP servers.

  Although not recommended, you can configure ESXi to allow a reference time by using the own system clock

  If you can not configure ESXi to synchronize to external NTP servers upstream.

  UI, tab Configuration, using software (time setting), properties, Options, and NTP settings.

  Specify "127.127.1.0" as your single NTP server. Don't forget to check the box "restart NTP service to apply the changes.

  then click OK twice to close the dialog boxes. Wait a few minutes for NTP sync, then try your test.

  According to RFC 4330, NTP-SNTP (Simple) customers must not use time in a package of NTP response if the

  stratum returned is 0 (and the leap indicator is 3). Apparently, your client Windows NTP Simple is more

  the RFC.

• How to configure Gemfire mode client/server with external supplier of XA transactions

  Hello

  I would like to have a transaction between the operations of Gemfire and WebSphere MQ using Atomikos as XA transaction manager.

  The documentation is rather evasive about how to configure Gemfire with an external transaction manager when using a client/server Gemfire deployment.

  Any help appreciated.

  Thank you!

  Unfortunately the Atomikos is not supported. Please see this thread for more information: GemFire and Atomikos in tcServer

  -Jens

• Can I use the same NTP server configured in the firewall to guard

  I configured the NTP server in my VCSC Expressway it synchronized correctly, but I'm unable to configured in my VCSC Gatekeeper with the same NTP server address that is configured in VCScExpresway.

  Please suggest

  Hello!

  You use in.pool.ntp.org. This isn't a single ntp server, there is a pool of servers,

  then you might see different ntp servers, and they can also change and sometimes

  It can also happen that yo will get a limit down.

  If I get him here, I have for exmple get:

  $host in.pool.ntp.org
  in.pool.ntp.org has address 113.30.137.34
  in.pool.ntp.org has address 119.226.101.131
  

  and a little later, I got:

  $ host in.pool.ntp.org
  in.pool.ntp.org has address 123.108.225.6
  in.pool.ntp.org has address 125.62.193.121
  

  In any case you want to configure multiple NTP server addresses.

  So, if you want to use this area (India):

  * You must configure these three host names as described here: http://www.pool.ntp.org/zone/in

  * See who works for DNS resolution (which may also be the problem here)

  * you have a suitable internet access

  * see that the firewall is open to 123 to any host on the internet

  * If you are not in India use a different area

  On the VCS under Maintanance > tools > utilities you could for example check if you can resolve DNS and traceroute/ping external hosts on network.

  The other option is to find at least 2 NTP servers you know and that you can use and set up.

  then you could lock the specific IPS in the firewall, otherwise it should be open to all.

  Its also not hard to set up your own server NTP, incidentally.

• Altered in Cisco Unity Connection and cancelled permits NTP server

  I use Cisco Unity Connection 8.6.1 and cancelled my Inbox licenses.  A few days ago I noticed that the timestamp of the voicemails was different from what said our CUCM so immediately, I assume that the NTP servers were different.  I was correct and made the change on our server CUC.  I came back to add another user, a few days later and was motivated that I didn't have enough licenses.  After researching on it after the fact, it seems that this happened because the value of NTP server is one of the values that cannot change with the current license, and I'm in a State of the trial for 30 days (24 days left now).  Now my problem is that I don't remember what would replace this NTP server.  How can I fix this problem?

  Hi William,.

  I guess the connection of the unit is installed on the virtual machine and therefore license MAC is here

  You can get the rehost license by launching the mail to [email protected] / * /

  regds,

  aamns

• NTP server authentication

  I'll put up the master NTP server on Catalyst 4000 series switch. I want to implement authentication between the server and the client. I have the following commands is not working.

  What's wrong with the commands below?

  Server:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  NTP master 6

  NTP max-associations 10

  Client:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  key to NTP server 10.0.0.1 1

  AV

  I think there are two separate issues here and they are not really related to each other. It is a question if your switch must be configured as master ntp. If the switch is configured as master ntp, then it will offer his version of time that it is authoritative or not (either correct or not). I think it is a bad idea and hope that this is not something that you did intentionally.

  The other question is why the switch is not hours of instruction from the marine server. It seems that there are several reasons why this can happen. It is possible that the NTP requests you are not to get on the server or the server responses aren't you. My guess is that it probably is, since the show ntp association does not show a reference to the server of the Navy clock. Or it is possible that the NTP response is you but there's not enough variability in traffic through the network switch is not able to synchronize with the server. I saw a customer network when it's a problem for a while.

  I would say the next step could be to debug ntp package and see if you send to the correct address and see if you have found answers.

  HTH

  Rick

• Cisco ISE synchronization and NTP server

  I am currently implementing Cisco ISE to our customer.

  But having a little problem Cisco ISE cannot synchronize with NTP server.

  Keep in mind, NTP servers in AD.

  Currently, Cisco ISE synchronize just at the local level.

  Cisco ISE implemented distributed mode, when there are two Cisco ISE installed on VMware (Administration & monitoring primary & secondary node), and another is the device (political Service node).

  As a result of it might not sync server NTP and the ISE of Cisco, Cisco ISE often OUT-OF-SYN.

  Is there a solution for this problem?

  Gandhi,

  This is a known issue, I have crossed upwards and have not read that you use AD as your NTP server, there have been problems with integration of the ISE and ACS with AD as their ntp source, please use another device like sources ntp, for example a router.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• PIX as a NTP server for inside networks

  I currently have my PIX receiving NTP of a trusted external source. I would put my switches to pick up their time to the PIX. I don't see anywhere that it is possible. I have tried using my interior of interface as the source server for the customers, but they never receive NTP messages and remain unsynchronized.

  Our PIX is the internal common points for each of our offices (they create our web of connections Internet VPN tunnels) and are the logical choice for traffic NTP ditribute throughout our org.

  Can someone answer for sure that PIX will act as NTP servers when it is called by clients configured for example:

  Insside source NTP server (PIX1_IP)

  This works when PIX1_IP is actually all other(non-PIX) NTP internal source.

  For security reasons, the PIX is only an NTP client. Is not a NTP server and response to queries from the NTP clients. PIX does not meet the NTP queries. If you enable logging on the PIX you can see a syslog message

  % 3 PIX-610001: int_name of interface for the NTP daemon: package refused to

  IP_addr

  OR similar.

  Hope that helps!

• upgrade windows vcenter 5.1 with oracle external to the appliance database virtual 6

  Hey people,

  We have a Windows external Vcenter 5.1 with an oracle database server. We would like to upgrade to an appliance Vcenter virtual v6 with an external oracle database. I was not able to find much info on this since most posts and blogs are based or sql.

  Is it as simple as deploying a new installation of a Vcenter virtuall device v6 and then connect it with our database current oracle and move virtual machines and turn from the old Server 5.1?

  GR,

  Michiel

  Welcome to the community,

  You can not skip vcenter windows 5.1 with oracle external to the appliance database virtual 6. You can improve windows vcenter 5.1 with oracle database external to vCenter windows 6.0 with external oracle database.

  From now officially VMware does not support migration from Windows to vCSA. But it is adventure, you can explore more

  https://labs.VMware.com/flings/VCs-to-VCVA-converter

  Concerning

• How can I communicate with an external application

  I develop a plugin for Premiere Pro and need to communicate with the server. Because the socket object is not supported in the body, I have to write an external application with C to communicate with the server.

  Is it possible that I can send or receive messages between jsx and the external application? Or y at - it another way to simply communicate with server with javascript API?

  It's a web page; You can use cookies.

  CEP_HTML_Test_Extension shows the use of cookies.

  Adobe-CEP/Samples · GitHub

• NTP server

  Hello

  I configured in the configuration of time esx server and all the VM are synchronized to the ESX.

  Now, I want to also synchronize Active equipment such as cisco routers to synchronize to the ESX. When I set up the router with the address ESX cisco, cisco does not recognize ESX as an ntp server and the stratum is more than 15 years.

  Also, is it possible to configure the ESX as an NTP server to meet the demand of the ntp? Or it's just for the virtual machine with the virtual machine tools and that's all.

  Thans a lot in advance for your answer.

  Welcome to the forums!

  At least, you must open ports in firewall ESX to accept ntp queries.

  esxcfg-firewall - o 123, udp, in, ntp

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• kernel_task runaway (from 300 to 600%) CPU with 2 external displays

  I have a MacBook Pro (retina, mid-2012), and for a year and a half, I've had episodes fighter during the kernel_task suddenly begin to consume all processor CPU (from 300 to 600%), is the response of the system so slow it is impossible to use.  I experience these episodes throughout the front 1-2 years that the machine went from Yosemite El Capitan and now Sierra.

  Normally, I use my MacBook with two external displays, both at work and at home.  At work, I have two external screens of Lenovo, and at home, I have two screens Apple (Apple Cinema Display 27-inch and 27-inch Apple Thunderbolt Display). I discovered that this kernel_task high CPU usage can only be stopped by disconnecting one of the external screens.  After unplugging an external display, the kernel_task subsides immediately to normal (< 5%).  After a few minutes, I can reconnect the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 300-600% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Note that since I upgraded to MacOS Sierra fugue kernel_task CPU frequency has increased considerably: of 1 kernel_task runaway every several days to a runaway almost every 10 minutes or so.   I don't have a reason this frequency has increased, but the runaway condition seems to have worsened by the fact that the photoanalysisd daemon is running like crazy on my grand (72 000) library of Photos.

  Also note that I started in recovery mode and have re-installed MacOS Sierra, and it has no effect on the runaway kernel_task.

  Any ideas on how to fix this resumption of kernel_task of all my CPU?

  I have attached my EtreCheck system report below.  This report was captured with two attached external displays.  At halfway while generating a report, the kicks and started kernel_task hogging CPU again.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-25 14:24:02

  Download EtreCheck from https://etrecheck.com

  Time 07:59

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Sometimes, while working with my MacBook connected to two external displays, the kernel_task pulls up to 600 to 800% CPU and stays there until I unplug at least one of the external screens.  After disconnecting, the kernal_task subsides immediately to normal (< 5%).  After a few minutes, I can plug the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 600 to 800% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Hardware Information: ⓘ

  MacBook Pro (retina, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro10, 1

  1 2.6 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 242

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Color LCD 3840 x 2400

  LED Cinema Display 2560 x 1440

  Thunderbolt Display 2560 x 1440

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since the start time: about an hour

  Disc information: ⓘ

  APPLE SSD SM512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Boromir (disk1) /: 499,05 (Go 140,24 free)

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Audio display

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: ⓘ

  / etc/sudoers, 2299 but file size expected 1563

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Beats Updater.app

  com.beatsbydre.BeatsDFUSupport [no charge] (2.1.0 - SDK 10.10 - 2015-10-29) [Support]

  /Applications/proxifier.app

  [no charge] com.initex.proxifier.macosx.kext (2.15.2b1 - SDK 10.7 - 2015-09-10) [Support]

  / System/Library/Extensions

  [no charge] com.makemkv.kext.daspi (1.5-2016-09-25) [Support]

  Startup items: ⓘ

  TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 156 jobs

  [running] Apple 108 jobs

  Launch system demons: ⓘ

  [loaded] com.apple.jetsamproperties.Mac.plist (2016-08-25) [Support]

  [no charge] 41 tasks of Apple

  [loading] 153 jobs Apple

  tasks of Apple 109 [performance]

  Launch officers: ⓘ

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-11) [Support]

  [loading] com.cisco.anyconnect.gui.plist (2014-06-10)

  com.DisplayLink.UserAgent.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-01-04) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-29) [Support]

  com.backblaze.bzserv.plist [running] (2016-07-11) [Support]

  com.Cisco.anyconnect.vpnagentd.plist [running] (2014-06-10) [Support]

  com.DisplayLink.usbnivolistener.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-09) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-01-04) [Support]

  [loading] com.sharpcast.xfsmond.plist (2013-11-30) [Support]

  User launch officers: ⓘ

  com.backblaze.bzbmenu.plist [running] (2016-09-25) [Support]

  com.vladalexa.MagicPrefs.plist [running] (2016-09-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  HWMonitor Application (/ Applications/HWMonitor.app)

  Hidden CPULed Application (/ Applications/CPULed.app)

  Application of hidden activity monitor (/ Applications/Utilities/Activity Monitor.app)

  Dropbox application (/ Applications/Dropbox.app)

  Hidden SizzlingKeys Application (/ Applications/SizzlingKeys.app)

  Beats Updater Application (/ Applications/bat Updater.app)

  Hidden NET Monitor Application (/ Applications/Net Monitor.app)

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  Silverlight: 5.1.20913.0 - SDK 10.6 (2014-03-07) [Support]

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-18) check the version of

  User Plug-ins internet: ⓘ

  WebEx64: SDK-1.0-10.10 (2016-01-23) [Support]

  Safari extensions: ⓘ

  Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-15)

  3rd party preference panes: ⓘ

  Backblaze backup (2016-07-11) [Support]

  Flash Player (2016-08-29) [Support]

  FUSE for OS X (OSXFUSE) (2013-11-30) [Support]

  Java (2016-08-18) [Support]

  MagicPrefs (2016-01-20) [Support]

  MenuMeters (2014-10-22) [Support]

  TiVo Desktop (2009-11-23) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Boromir: Disc size: 499,05 GB disc used: 358,81 GB

  Destinations:

  Frodo Time Machine [Local]

  Total size: 999,86 GB

  Total number of backups: 40

  An older backup: 09/09/16, 02:09

  Last backup: 25/09/16, 11:49

  Backup disk size: too small

  Backup size GB 999,86 < (disc 358,81 GB X 3)

  Top of page process CPU: ⓘ

  345% kernel_task

  56% Information System

  44% cloudphotosd

  42% iTunesCacheExtension

  30% activity monitor

  Top of page process of memory: ⓘ

  1.44 GB kernel_task

  1.18 GB com.apple.WebKit.WebContent (6)

  786 MB mds_stores

  590 MB bztransmit

  Mdworker (18) 492 MB

  Virtual memory information: ⓘ

  256 MB of free RAM

  4 pm used GB RAM (5.96 GB being cached)

  768 KB used Swap

  Diagnostic information: ⓘ

  25 sep, 2016, ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-25-134618_ 13:46:18 [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  25 sep, 2016, 13:19:15 /Library/Logs/DiagnosticReports/photolibraryd_2016-09-25-131915_[redacted].cpu_ resource.diag [details]

  /System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/Supp ort/photolibraryd

  25 sep, 2016, 13:06:44 test - passed

  September 22, 2016, 16:03:11 ~/Library/Logs/DiagnosticReports/Microsoft Word_2016-09-22-160311_ [redacted] .crash

  com.microsoft.Word - Applications / Microsoft Office 2008/Microsoft Word Word.app/Contents/MacOS/Microsoft

  Start safe mode, use this way and see if the problem is recurring