PIX to function as an Ntp Server

Similar Questions

• PIX as a NTP server for inside networks

  I currently have my PIX receiving NTP of a trusted external source. I would put my switches to pick up their time to the PIX. I don't see anywhere that it is possible. I have tried using my interior of interface as the source server for the customers, but they never receive NTP messages and remain unsynchronized.

  Our PIX is the internal common points for each of our offices (they create our web of connections Internet VPN tunnels) and are the logical choice for traffic NTP ditribute throughout our org.

  Can someone answer for sure that PIX will act as NTP servers when it is called by clients configured for example:

  Insside source NTP server (PIX1_IP)

  This works when PIX1_IP is actually all other(non-PIX) NTP internal source.

  For security reasons, the PIX is only an NTP client. Is not a NTP server and response to queries from the NTP clients. PIX does not meet the NTP queries. If you enable logging on the PIX you can see a syslog message

  % 3 PIX-610001: int_name of interface for the NTP daemon: package refused to

  IP_addr

  OR similar.

  Hope that helps!

• PDC as a NTP server with no external link WAN

  A bit of a unique environment...

  Here's the background: R2 Windows Server 2012 (GUI) virtual (VMware, Hyper-V, don't think that it matters tho?)

  HIGHLY SECURE (No link whatsoever outside the network) environment which is currently in phase of tests .

  Small environment, then domain, DNS, and DHCP controller all-in-one...

  The issue is, this PDC must to also act as NTP server for the whole environment...

  Now, since there is no link with the outside world, I can not synchronize time with a server such as time.windows.com or pool.ntp.org time so I need to manually configure the time on DC1 and let members computers synchronize their time with mine, so we chronological consistent throughout the network, even if it can be turned off in regard to real-time.

  Sounds easy enough, but as my username suggests, I'm a total noob, then how?

  A few items of Microsoft (like this: https://support.microsoft.com/en-us/kb/816042) suggest that to set the internal clock as the source for our NTP server on the domain controller requires changes in the registry... I sincerely hope that as advanced as a 2012 R2 server should be able to something like that happen to without necessary to enter regedit.

  In addition, in the article above, will it work if my domain controller is a virtual machine, or it's only about physical machines?

  And once I have the task, the issue of the domain member computers comes to mind... the following thoughts come to mind:

  -Should I go into each computer only member and point manually to my DC to tell him that his also the NTP?

  -What about some news servers that join the domain?

  -Are there maybe a GPO, I can create this for me? And if so, how? (GPO Noob too = P)

  Thank you to troubleshoot a windows apprentice young power make it work and not get fired! =)

  Kind regards

  knowNoob

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• NTP server lag get higher

  Hello

  I installed the 2012 server in vmware esxi

  the server is a satandalone and is not a member of the domain

  I have configured the server to be a ntp client and synchronize time from an ntp server closest to you.

  When I check the offset of the time I get a 0.03 s

  and this result is good for my environment, but after some time the offset increase until it get 0.3 s

  What are the causes of the offset to change after a while and increase so high

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Altered in Cisco Unity Connection and cancelled permits NTP server

  I use Cisco Unity Connection 8.6.1 and cancelled my Inbox licenses.  A few days ago I noticed that the timestamp of the voicemails was different from what said our CUCM so immediately, I assume that the NTP servers were different.  I was correct and made the change on our server CUC.  I came back to add another user, a few days later and was motivated that I didn't have enough licenses.  After researching on it after the fact, it seems that this happened because the value of NTP server is one of the values that cannot change with the current license, and I'm in a State of the trial for 30 days (24 days left now).  Now my problem is that I don't remember what would replace this NTP server.  How can I fix this problem?

  Hi William,.

  I guess the connection of the unit is installed on the virtual machine and therefore license MAC is here

  You can get the rehost license by launching the mail to [email protected] / * /

  regds,

  aamns

• NTP server authentication

  I'll put up the master NTP server on Catalyst 4000 series switch. I want to implement authentication between the server and the client. I have the following commands is not working.

  What's wrong with the commands below?

  Server:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  NTP master 6

  NTP max-associations 10

  Client:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  key to NTP server 10.0.0.1 1

  AV

  I think there are two separate issues here and they are not really related to each other. It is a question if your switch must be configured as master ntp. If the switch is configured as master ntp, then it will offer his version of time that it is authoritative or not (either correct or not). I think it is a bad idea and hope that this is not something that you did intentionally.

  The other question is why the switch is not hours of instruction from the marine server. It seems that there are several reasons why this can happen. It is possible that the NTP requests you are not to get on the server or the server responses aren't you. My guess is that it probably is, since the show ntp association does not show a reference to the server of the Navy clock. Or it is possible that the NTP response is you but there's not enough variability in traffic through the network switch is not able to synchronize with the server. I saw a customer network when it's a problem for a while.

  I would say the next step could be to debug ntp package and see if you send to the correct address and see if you have found answers.

  HTH

  Rick

• Can I use the same NTP server configured in the firewall to guard

  I configured the NTP server in my VCSC Expressway it synchronized correctly, but I'm unable to configured in my VCSC Gatekeeper with the same NTP server address that is configured in VCScExpresway.

  Please suggest

  Hello!

  You use in.pool.ntp.org. This isn't a single ntp server, there is a pool of servers,

  then you might see different ntp servers, and they can also change and sometimes

  It can also happen that yo will get a limit down.

  If I get him here, I have for exmple get:

  $host in.pool.ntp.org
  in.pool.ntp.org has address 113.30.137.34
  in.pool.ntp.org has address 119.226.101.131
  

  and a little later, I got:

  $ host in.pool.ntp.org
  in.pool.ntp.org has address 123.108.225.6
  in.pool.ntp.org has address 125.62.193.121
  

  In any case you want to configure multiple NTP server addresses.

  So, if you want to use this area (India):

  * You must configure these three host names as described here: http://www.pool.ntp.org/zone/in

  * See who works for DNS resolution (which may also be the problem here)

  * you have a suitable internet access

  * see that the firewall is open to 123 to any host on the internet

  * If you are not in India use a different area

  On the VCS under Maintanance > tools > utilities you could for example check if you can resolve DNS and traceroute/ping external hosts on network.

  The other option is to find at least 2 NTP servers you know and that you can use and set up.

  then you could lock the specific IPS in the firewall, otherwise it should be open to all.

  Its also not hard to set up your own server NTP, incidentally.

• Cisco ISE synchronization and NTP server

  I am currently implementing Cisco ISE to our customer.

  But having a little problem Cisco ISE cannot synchronize with NTP server.

  Keep in mind, NTP servers in AD.

  Currently, Cisco ISE synchronize just at the local level.

  Cisco ISE implemented distributed mode, when there are two Cisco ISE installed on VMware (Administration & monitoring primary & secondary node), and another is the device (political Service node).

  As a result of it might not sync server NTP and the ISE of Cisco, Cisco ISE often OUT-OF-SYN.

  Is there a solution for this problem?

  Gandhi,

  This is a known issue, I have crossed upwards and have not read that you use AD as your NTP server, there have been problems with integration of the ISE and ACS with AD as their ntp source, please use another device like sources ntp, for example a router.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• ESXi 5.1 configured as a NTP server, do not sync with the Local PC

  I have a 5.1 ESXi server configured as an NTP server and a Windows Server 2008 R2 local PC that are not sync.  I understand well, it is not recommended for ESXi, but I read [1] [2] that, whenever an ESXi server is running as a client, it also acts as a server, so I enabled as a NTP client in vSphere by ticking the NTP client, adding some servers to the server list, and then click on run, and I also activated the 123 incoming/outgoing port by adding the shell of ESXi firewall settings.

  I'm pretty sure it isn't a firewall problem.  I completely disabled the firewall on my local PC.  Running "w32tm keyboardists computers: - IP address of the server -" give me the time of the server and running the software NTPQuery gives me an answer back on port 123 of the server time.

  I tried:

  - Date/time settings (right-click on notification area-> set date/time-> Internet time-> set as the IP address of the server) - sync fails (* an error has occurred while Windows timed with - server IP-*)

  - Group Policy Editor (Computer Configuration\Administrative Templates administration\systeme\service Time Service, currently disabled but because I heard this causes problems) - synchronization fails

  - The registry editor (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\settings) - synchronization fails

  - Command prompt, using:

  w32tm /config /manualpeerlist:-IP of server- /syncfromflags:MANUAL /reliable:yes /update
  net stop w32time && net start w32time
  w32tm /resync /rediscover
  
  
  

  This updates the registry properly, but the outputs "the computer did not resync because no time data was available."  And when I use the command "w32tm/query/source" the source is always "The local CMOS clock."

  Here is the output from w32tm/query /configuration

      [Configuration]
  
  
      EventLogFlags: 2 (Local)
      AnnounceFlags: 5 (Local)
      TimeJumpAuditOffset: 28800 (Local)
      MinPollInterval: 10 (Local)
      MaxPollInterval: 15 (Local)
      MaxNegPhaseCorrection: 3600 (Local)
      MaxPosPhaseCorrection: 3600 (Local)
      MaxAllowedPhaseOffset: 1 (Local)
    
      FrequencyCorrectRate: 4 (Local)
      PollAdjustFactor: 5 (Local)
      LargePhaseOffset: 50000000 (Local)
      SpikeWatchPeriod: 900 (Local)
      LocalClockDispersion: 10 (Local)
      HoldPeriod: 5 (Local)
      PhaseCorrectRate: 1 (Local)
      UpdateInterval: 360000 (Local)
  
  
    
      [TimeProviders]
    
      NtpClient (Local)
      DllName: C:\windows\system32\w32time.dll (Loca
      Enabled: 1 (Local)
      InputProvider: 1 (Local)
      AllowNonstandardModeCombinations: 1 (Local)
      ResolvePeerBackoffMinutes: 15 (Local)
      ResolvePeerBackoffMaxTimes: 7 (Local)
      CompatibilityFlags: 2147483648 (Local)
      EventLogFlags: 1 (Local)
      LargeSampleSkew: 3 (Local)
      SpecialPollInterval: 900 (Local)
      Type: NTP (Local)
      NtpServer: -IP of server-,0x1 (Local)
    
      NtpServer (Local)
      DllName: C:\windows\system32\w32time.dll (Loca
      Enabled: 1 (Local)
      InputProvider: 0 (Local)
      AllowNonstandardModeCombinations: 1 (Local)
  
  
  

  Any ideas?  Thanks in advance.

  Your ESXi server response shows that the leap indicator is 3 and the server stratum is 0.

  This means that ESXi NTP server is synchronized and unable to provide a valid reference time to customers.

  We recommend that you configure your ESXi host with valid upstream NTP servers such as:

  0.vmware.pool.ntp.org,1.vmware.pool.ntp.org and 2. VMware.pool.ntp.org

  as described in the KB article or alternatively your internet service provider NTP servers.

  Although not recommended, you can configure ESXi to allow a reference time by using the own system clock

  If you can not configure ESXi to synchronize to external NTP servers upstream.

  UI, tab Configuration, using software (time setting), properties, Options, and NTP settings.

  Specify "127.127.1.0" as your single NTP server. Don't forget to check the box "restart NTP service to apply the changes.

  then click OK twice to close the dialog boxes. Wait a few minutes for NTP sync, then try your test.

  According to RFC 4330, NTP-SNTP (Simple) customers must not use time in a package of NTP response if the

  stratum returned is 0 (and the leap indicator is 3). Apparently, your client Windows NTP Simple is more

  the RFC.

• Define information about NTP server using powerCLI

  How can I adjust the settings of the NTP server on a host group ESXi using powerCLI?  I want to set my primary and secondary NTP servers names and them all to have the NTP Server service start by the host.

  Thank you!

  Like this

  Get-VMHost | Add-VMHostNtpServer - NtpServer myntpserver

• NTP server

  Hello

  I configured in the configuration of time esx server and all the VM are synchronized to the ESX.

  Now, I want to also synchronize Active equipment such as cisco routers to synchronize to the ESX. When I set up the router with the address ESX cisco, cisco does not recognize ESX as an ntp server and the stratum is more than 15 years.

  Also, is it possible to configure the ESX as an NTP server to meet the demand of the ntp? Or it's just for the virtual machine with the virtual machine tools and that's all.

  Thans a lot in advance for your answer.

  Welcome to the forums!

  At least, you must open ports in firewall ESX to accept ntp queries.

  esxcfg-firewall - o 123, udp, in, ntp

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• FW PIX configuration using PKI on Microsoft Server CA

  I just wanted to know ther was looking for someone out there who has led to private PKI IPSec on a PIX 515ER to CA Server of Microsoft 2 K Advanced Server help. If so, can you please direct me for details of how to implement this? I'm more interested in implementing IPSec with ICP on remote users dial-up (via the Internet) using customer Cisco VPN and ends on a PIX firewall. Thanks in advance for your answers.

  Hello

  Try the following link

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_user_guide_chapter09186a00800898d9.html#1031583

  MS CA server installation is a very simple task...

  a. install network / active directory / DNS / IIS services

  b. then add the CA on the Server service. ensure that u Select Business certification, not stand-alone option... (I also recommend to read a few notes on the MS site of).

  c. once the installation type sequence url on the web browser from a remote PC

  http://certsrv/ - this url will allow you to request and see the status of the certificates...

  I used MS CA servers for a PKI IPsec deployment and it work very well...

  I hope this helps u

  concerning

  with this

• PIX 501 problems with the web server internal.

  I want to open for my internal Web server, so it can be accessed from outside and I read about it here and how to do it and I do what I think of his right, but I can´t operate.

  Now I just tried to open the http port standard 80 but later I want to open a specific port and also use SSL on the web server for added security.

  Then I would like my setup now get help and also how to do when using other ports and SSL later.

  Thanks Thomas!

  6.3 (1) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  alfta hostname

  domain ciscopix.com

  names of

  name 192.168.1.16 TerminalPC

  name 192.168.3.0 Lager

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 255.255.255.0 Lager

  permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list outside_cryptomap_40 255.255.255.0 255.255.255.0 Lager

  outside_cryptomap_60 ip access list allow

  192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  outside_access_in tcp allowed access list all eq www

  host 62.108.197.90 eq www

  IP outdoor 62.108.197.90 255.255.255.192

  IP address inside 192.168.1.254 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 62.108.197.10 255.255.255.255 outside

  location of PDM 62.108.197.11 255.255.255.255 outside

  location of PDM 192.168.1.0 255.255.255.255 inside

  location of PDM TerminalPC 255.255.255.255 inside

  location of PDM 192.168.2.0 255.255.255.0 outside

  location of PDM Lager 255.255.255.0 outside

  location of PDM 192.168.2.0 255.255.255.0 inside

  location of PDM 62.108.197.137 255.255.255.255 outside

  location of PDM 62.108.197.137 255.255.255.255 inside

  location of PDM 195.67.210.72 255.255.255.255 outside

  location of PDM 62.108.197.90 255.255.255.255 inside

  PDM logging 100 information

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) tcp 62.108.197.90 www TerminalPC www netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 62.108.197.65 1

  Enable http server

  http 62.108.197.10 255.255.255.255 outside

  http 62.108.197.11 255.255.255.255 outside

  http 195.67.210.72 255.255.255.255 outside

  http 192.168.1.0 255.255.255.0 inside

  http 62.108.197.137 255.255.255.255 inside

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set esp strong - esp-sha-hmac

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  peer set card crypto outside_map 20 195.198.46.88

  outside_map card crypto 20 the transform-set ESP-DES-MD5 value

  outside_map 40 ipsec-isakmp crypto map

  card crypto outside_map 40 correspondence address outside_cryptomap_40

  peer set card crypto outside_map 40 62.108.197.137

  outside_map card crypto 40 the transform-set ESP-DES-MD5 value

  outside_map 60 ipsec-isakmp crypto map

  card crypto outside_map 60 match address outside_cryptomap_60

  peer set card crypto outside_map 60 195.198.46.88

  card crypto outside_map 60 the transform-set ESP-DES-MD5 value

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 62.108.197.137 netmask 255.255.255.255

  ISAKMP key * address 195.198.46.88 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 sha hash

  10 1 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Telnet 192.168.1.0 255.255.255.255 inside

  Get out your ACL - access-list outside_access_in permit tcp any host 62.108.197.90 eq www

  And a new application:

  outside_access_in list access permit tcp any host 62.108.197.90 eq www

  Access-group outside_access_in in interface outside

  * You have the group-access above on your original configuration message, BUT not on the above post.

  Don't forget to issue clear xlate after the change and also record with write mem.

  Try to do this in the pix CLI instead of using PDM.

  Hope this helps and let me know how you go.

  Jay

• PIX Firewall Syslog on Windows NT Server

  Can someone direct me to an on-line document explaing creating a Win NT box to receive messages from syslog frm pix 6.2 (2).

  Thank you

  Vik

  Don't think that there is no documentation specifically about this.

  You will need some software of syslog, Kiwi Syslog software is free and very good, you can get it from www.kiwisyslog.com.

  Load it then configured your PIX to receive messagaes logging for it, that's all there is to it. Commands on the PIX can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_62/cmdref/GL.htm#1028090

  I suggest that you use UDP rather than TCP syslogging. If you use TCP and the PIX is unable to join Server syslog for some reason, the PIX of design stops all traffic that cross (the theory is that if you are unable to open a session, do not allow it).

• helps connect to the NIST NTP server on port 123

  I can get time NIST in day format using the rt_nist_date_time.llb example, posted on ni.com, but I can't connect to NIST NTP format time data using the port 123.  I freely admit to be over my head with this stuff and have spent a large part of this holiday Thanksgiving reading on UDP and TCP.

  The attached vi summarizes what I've tried so far.  The case of the UDP is what I thought would work, but I can't come up with a network address that likes the open UDP vi.  Can anyone out there help this n00b tell the time?

  The attachment is supposed to be in version 8.0, although I work in 9.0

  Here is a link to time formats: http://tf.nist.gov/service/its.htm

  Jeff

  Altenbach says:

  See if you can parse the resulting string.

  OK, things seem to work. Here's how to analyze all of the NTP package. Of course, if you only want the timestamp, you could just parse the desired substring and eliminate a lot of products in bulk.

  Things are a little tricky because the timestamp differs from 4 years from the definition of LabVIEW or in the representation of FXP 32.32. If you don't care to fractions of a second, you could analyze only the integer part of 32 bits for the simpler code.

  (I wrote this between the Turkey and dessert, please make sure of course, it's all good. Change as necessary. )