PE - 10 do not hear the sound files in preview, change or final movie. Works fine outside PE-10.

Similar Questions

• Can not hear the sound

  Downloaded a course to start and can not hear the sound when you view the course on the browser. Help me.

  Hello

  May I know who you have been faced with the question is specific to any browser or it occurs on all browsers? If it only occurs in Internet Explorer, then you can try to follow the steps below and see if it works-

  1. Go to tools > Internet in Internet Explorer options.
  2. Click the Advanced tab.
  3. In settings, scroll down to the multimedia section and please make sure that the below highlighted option must be selected.

  

  Once you checked the options above, then try to view the course on IE and check if it works.

  Kind regards

  Ajit

• IDT installed, can not hear the sound being transmitted

  I tried to fix the audio for a few days now, I got the IDT High Definition CODEC after awhile, but I can't hear the sound being released now.

  It would be great if someone, perhaps a professional give me sent assistance because looking around on the internet has proven that anyone had a similar problem that has not been resolved by a simple reinstallation of the driver, thank you.

  Product name: HP ENVY 15 Notebook PC

  Product number: A7H00UAR #ABC

  8.1 pro 64-bit of Windows

  (This all happened after a thermal cut-out)

  May be stupid, but a solution to my problem. A full stop after you have reinstalled the driver seemed to fix my problem (after the installation of the driver is restarted too) thanks HP Forums for all the help on the recovery of my audio well.

• Can not hear the sound of the UFO PROJECT PART6

  Hello, I am one of those who learn After Effect by your training material on the Adobe Web site.

  How to add video special effects | Tutorials Adobe after effects CC

  I don't hear the sound of the PROJECT PART6 UFO. WHAT SHOULD I DO?

  The speaker and the thin volume.

  See the PROJECT UFO PART6.

  (WHY ONLY ME?)

  Should I make the video from the beginning? (My laptop is too slow).

  10 WINDOW

  AFTER THE EFFECT CC 2015

  I think so.

  I've tried the shortcut key 0 [zero] and [delete] to the ram preview.

  But it did not work. OTL

  Make sure that you enable audio switch for the layer

  

  

• Can not hear the sound after installing Windows 7

  Original title: Audio problem

  I'm not able to hear any sound from my computer. I have integrated speakers it was working perfectly before, but after I installed windows 7 if I play any audio file I can see the game but I hear no sound what should I do

  Vista clean install of XP?

  Anyway, you will need to install W7 audio drivers specific for your audio device. Download on the part of the Web site of the manufacturer of your PC/laptop, Web site of the manufacturer of the motherboard if you made the yourseof PC, or, if you have one, the sound card manufacturer's Web site.

  See you soon,.

  Jerry

• Pavilion g4: can not hear the sound of my laptop

  I can't hear from the laptop. When I try to test the sound he says not to test tone. I think I got g4, but I know it's the Pavilion g series

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59154.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52791.exe

  Once the relocation of Chipset is complete, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• USB turntable set-up - can not hear the sound for the disabled application

  I BOUGHT AN ION PROFILE PRO PLATINUM-DRIVE TO PLAY MY LP BY DESK TOP. THEY HAVE SOFTWARE TO RECORD LP AND I PUT IN PLACE ALL THE NECESSARY PARAMETERS AND PROGRAM WORKS FINE AND I CAN HEAR MUSIC BY DESK TOP, ONCE I'M OUT OF PROGRAM AND I TRY TO PLAY AN LP ON PLATINUM I GET NO SOUND THROUGH MY OFFICE UPSTAIRS. I AM SETTING SOUNDS UPWARD. I DON'T LIKE ON THE RECORDING OF THE LP, I JUST WANT TO LISTEN TO THEM ACROSS THE TOP OF OFFICE; MARIOTAPCO

  Hi Mario,.

  1. What is the brand and the USB turntable?

  Check if the usb turntable is compatible with Windows 7, here is the link to check the compatibility of the hardware and software with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  The USB turntable requires the software to play music. I suggest you to contact the manufacturer of the hub on the issue.

• Can not hear the sound from the speakers

  I bought a new PC with WIndows 7 32 - bit OS, I have connected my PC to a Samsung LED TV. The problem is that I can hear audio thro headphones but not in my LED speakers?

  How to connect the computer to the tv, HDMI or VGA?  If you did with VGA, then you will need to connect an audio cable in the computer and television.

• My Windows Media Player will play the video of an MPG file, but it will not play the sound. What is the cause?

  I do video editing.  I transferred my camera video file and Windows Media Player played the video and audio very well at the beginning.  I edited the file with editing software and exported the file again.  Now, the sound will not play using WMP but it will play if I use video editing software.

  As a result, I've uploaded new files from the camera and now WMP not give me sound on those either.  If something seems to be affected by my WMP.  Any help you can give would be much appreciated.

  Hi rgosmond,

  (a) don't you get any specific error message when you play the video?

  (b) what is the file format of the resulting video file after editing by using the video editing software?

  (c) you are able to play the files on the computer? You hear the sound?

  I suggest you try the following steps:

  O make sure that windows MediaPlayer is not muted, press F7 on the keyboard to turn the sound back on.

  Ø check if the volume is at a minimum in Media Player, press F9 on the keyboard to increase the volume.

  Verify that the default audio device is correctly set

  1. click on start, type Sound in the box to start the search.

  2. click on sound in the results of search at the top of the start menu.

  3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:

  4. on the playback tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  5. on the playback tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  6. If the sound settings are well positioned, you are using speakers as the audio device and your speakers are already set as the default device, go to method 5 now.

  7. Select the audio device you want as the default audio device and then click on set as default.

  8. click OK to save your settings and close the sound dialog box.

  Now, check if the problem is resolved.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the photo in Windows Media Player.

  * Original title: Windows Media PLayer

  I have Windows Media Player version 12 installed but when you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the picture.  Please see image attached.

  Even if I see that I can change the version of the file in a different format, I have the same problem with videos on websites that I can not of course change the format before playing these.

  I managed to fix the problem for about 20 minutes by flattening my computer re - install the operating system and this resolved until all updates have been through, and then it disappeared again.  I tried many codecs packs and this still does not help.

  My system is running Windows 7 and Media Player version is 12.0.7601.18840, which tells me that Media Player is the most recent version.

  Please can someone help?

  

  Open uninstall a program in windows and in the left click on the feature to turn on or off windows. Clear the check box of the window Media Player, and then click ok. This will uninstall the drive, and then restart.

  After restarting the same steps, now, check the box for the same and perform a restart and if all goes well it should solve the problem.

  Note: Make sure that Windows is up-to-date.

• I am not able to hear the sound even if my drivers are installed properly in windows 7

  I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
  I have media chip c with creative 5.1 speakers.
  until this works perfectly...
  I am facing this problem since I made a mistake.
  only, I went to run and went into 'msconfig '.
  After that, I marked start diagnosis then applied
  After having no repeat no sound...
  and then I clicked on normal start, but still I can't get my sound help please

  Hello

  1. What is the brand and model of your computer?

  2. this issue occurs when access to a particular file by using Windows Media Player?

  3. do you see red X on the volume icon in the notification area?

  4. are you able to access the files of music from the original location?

  You can follow the suggestions and then check.

  Solution A: For sound program on your computer.

  Method 1

  You can follow the steps listed below:

  a. right click on the volume icon in the notification area.

  b. go to the playback device and right click on the empty area.

  c. Select Show disabled devices and Show disconnected devices.

  d. right-click on the pregnant , select Activate and go to the Properties.

  e. use of the device select use this device (enabled)

  f. click apply and OK.

  Method 2

  Make sure that the Windows Audio service is started.

  a. click on start.

  (b) in the search box, type services

  c. right click on Windows Audio and go to Properties.

  d. Select Automatic from the Startup type drop down.

  e. click on start.

  f. click apply and OK.

  g. restart the computer.

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Solution B: Due to Windows Media Player.

  Method 1

  You can run the troubleshooter in Windows Media Player.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2

  You can address everyone on the file.

  a. right click on the file and click on Properties.

  (b) in the Properties window, click on Security tab.

  c. now, click on Edit , then click on Add.

  d. now, type everyone in the box and click OK.

  e. then check the full control box.

  f. click apply and then click OK

  See also:

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

• I hear the sound when I download but do not see the image until a few seconds later, where can I go to diagnose this problem? r

  I hear the sound of the movie I am streaming before you see the characters who speak. Can I solve this problem by going somewhere in the Control Panel, or I have to go to a certain site?

  A moderator has moved this thread to Windows pictures and video Forum.

  You are able to view multimedia clips continuously successfully with other media players?

  To ensure that the player can try to download codecs automatically, you must maintain Internet access while playing the file, and your Internet security must be set to medium. In addition, you must be logged in as an administrator or as a member of the Administrators group. Finally, follow these steps in Windows Media Player:

  1. Click the arrow below the now playing tab, and then click Other Options. 2. On the Player tab, select the check box automatically download codecs . http://support.Microsoft.com/kb/291818 Codecs: Frequently asked questions http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions Media Player Codec Pack http://download.CNET.com/Media-Player-codec-pack/3000-13632_4-10749065.html Have you tried to uninstall the audio driver in Device Manager? Start > right click on computer Select manage Select Device Manager Click on the + next to sound, video and game controllers Right-click on the driver and select uninstall Close the Device Manager Restart the computer You could also try uninstalling WMP, restart and reinstall WMP How to uninstall Windows Media Player 11 in Windows XP http://support.Microsoft.com/kb/934372

• I made pdf file and added the audio file as a file embedded using acrobat pro 8, it works fine on pc (windows) when I move tab (android) the pdf file open but sound did not work. what I have to do to make it work

  I made pdf file and added the audio file as a file embedded using acrobat pro 8, it works fine on pc (windows) when I move to tab (android) the pdf file open but sound did not work. what I have to do to make it work

  Adobe Acrobat for Android or iOS software currently play any sound or video.

  -Dov

• I hear the sound to the hybrid Aver pcmcia tuner

  I hear the sound to aver hybrid pcmcia tuner. On another model, the noise is absent

  Post edited by: alexey_k

  Hello

  This 3rd party device does not for me. It s are not a product of Toshiba.
  I recommend asking for advice or additional information support of Aver.
  Guys should provide more information on clean products

  concerning

• I get error message libraries does not properly. the sound on my computer doesn't work do not at all.

  Sound on computer not working do not at all.

  Hello

  1. don't you make changes on the computer before the issue started?
  2. what operating system are you running on your machine?
  3. were you able to hear the sound of your computer before?

  Follow the steps in the articles below and check if this solves the problem of noise.
  
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Please provide us with more information about the issue of libraries so that we can help you to fix.