PE 1800 PERC LD 0 PERCRAID SCSI Disk Drive

Similar Questions

• H9 SCSI Disk Device

  My desktop computer HP Pavilion HPE h9 - 1215t Phoenix CTO has a hard drive WD 2 .0TB with the C drive, containing the Windows 7 operating system.  There is also a SCSI disk (MTFDDAK2 MTFDDAK256MAM - 1 K).

  What is the SCSI drive?

  "My H9 is an h9 - 1215t and the SSD 256 GB is not recognized when I go into computer, management of disk storage management."
  Computer Management displays:

  Disk 0 (basic 238.35 GB online) with 3 partitions; No name 100 MB EFI system Parition
  OS (C: 227,71 GB) and HP_Recovery (D: 10.54 GB NTFS).
  ---
  DISK 0 - it's essential / Micron (256 GB) Solid State Drive (SSD) with 3 partitions.
  DISC 1 - it's your drive Western Digital hard (2 TB).
  ---
  MS Windows 8.1 with UEFI and Secure Boot is significantly faster (almost compressed as) than MS Windows 7.
  I don't know how this specific HP computer was (originally installed) installation.

  You have applied the update driver Intel Rapid Storage Technology (RST)?
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-119917-1&cc=us&DLC=en&LC=en&OS=4063&product=5261660&sw_lang=
  ---
  The age of this SSD, MANY manufacturers released a updated firmware to date - to increase performance and respond to questions. For example, my SanDisk Ultra II SSD had a firmware update (2nd quarter 2014) that solved problems with Windows 8.1 reboot intermittently.

• What is WDC WD10 EADS-65M2B1 SCSI Disk Device

  What is WDC WD10 EADS-65M2B1 SCSI Disk Device

  Thanks a lot to explain that to me.  Yes, I noticed that the My Book device brought back ups info.  Thank you for helping me...

• Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

  Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?

  Hello

  You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

  If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

  Hope this helps and works.

  Chris

• Extend a thickness of stocked SCSI disk?

  It looks like so it is possible to extend a thickness of stocked SCSI disk.  It's not something I do very often does anyone have any notes on this?  It seems that snapshots should be deleted everything first.  It is a Windows 2008 Server.   Thanks for the help.

  Yes, it is possible with discs thin provisioned too.

  Basically you will ensure that the VM has no snapshots, increase the drive to the desired size in the virtual machine properties editor and then use the measure of volume inside the windows disk management console.

• How to fix windows in virtual scsi disk?

  Hi guys,.

  I have a server windows server 2008 in my computer running on wmware preinstalled. A week ago my server crashed. Now when I try to repair using the windows image, it says "Setup not found disk units installed on your computer.

  The drive I have installed windows is a SCSI disk (a virtual scsi disk, I have not all scsi devices connected to my PC). Without disks hard appear in the BIOS but if I am not mistaken, it's normal because only the SATA and IDE are see the place in the BIOS.

  I just need to repair windows using the iso, I have... Help, please

  most of the time the problem of 'lack of pilot' on Win7 and 2008 is bad downloads

• How to find if a scsi disk can be used as a ROW or only use not vsphere CLI.

  Hi, I want to know if the SCSI disk can be used as RDM and a remote computer running vSphere CLI.

  I tried to use 'vicfg-scsidevs - l', but it doesn't have the required information list

  ===============================================

  Here is sample out put

  MPX.vmhba0:C0:T1:l0

  Device type: disk

  Size: MB 69459

  Full name: disk space from VMware (mpx.vmhba0:C0:T1:L0)

  Plugin: NMP

  Device console: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Seller: VMware model: Block device Revis: 1.0

  SCSI level: 2 is nickname: status:

  : RDM Capable is removable:

  Other names:

  VML.0000000000766d686261303a313a30

  empty fields "Is Capable RDM" here.

  =======================================================

  When I executed the command 'esxcfg-scsidevs - l' on an ESX Server, he gave me the necessary info.

  MPX.vmhba0:C0:t0:l0

  Device type: Direct access

  Size: 138919 MB

  Full name: disk space from VMware (mpx.vmhba0:C0:T0:L0)

  Plugin: NMP

  The console device: / dev/cciss/c0d0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T0:L0

  Seller: VMware model: Block device Revis: 1.0

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: false

  Is Local: true

  Other names:

  VML.0000000000766d686261303a303a30

  So is it possible for vSphere CLI through which we can tell if the SCSI disk device can be used as ROW or NOT?

  and what parameter defined as capable of RDM?

  Thank you

  Chandra Sekhar P.

  Hi Chandra,

  In order to get the SCSI LUNS that can serve as RDM, you must use the QueryConfigTarget method. This method is defined on EnvironmentBrowser. You need to recover some EnvironmentBrowser object ComputeResource the HostSystem where the virtual machine is created. The configTarget.ScsiDisk returned after the method call contains the logic unit number information that is capable of RDM.

  I hope this helps!

  Neha

• VI 3 virtual machine SCSI disk is changed on the IDE drive in vsphere 4

  Hi Experts,

  When the virtual machine SCSI disk is add to the Vsphere virtual machine, only the scsci disk 3 VI is replaced by the mode IDE drive can be added.

  How to solve it? Thank you.

  Add a SCSI controller on the virtual machine and then add the disk

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  -Josh

  Trying to learn

• Several stores data on the Local SCSI disks?

  Hi all

  Is it possible to have several data stores on 1 partition VMFS on scsi disk?  or have you partition than to install multiple VMFS partitions?

  I have 1 VMFS 500 GB partiton, but it does not chop into several datatsores?

  The 'fb' partition created during installation is the VMFS data store. You can add another disk and use fdisk without problem.

  To do what you want, I guess you would need to delete the existing partition and then use free space to create new partitions 2 or more which could then be formatted with the VMFS. It is a question of intresting so I thought I'd look around (not enough to trash my interesting, but interesting test server). I found this ad that may be useful

  http://www.virtualvcp.com/content/view/67/26/

  Think I might give this whirl next time, I have a system still undelivered to the customer

  Post edited by: bulb for spelling and clarity

• Reference Dell 2950 Perc 6/i Raid card device driver

  Good morning community, I'm trying to find the Dell 2950 Perc 6/i Raid adapter Device Driver for Windows 2008 R2 Standard OS. Thanks in advance for your help. Modem489

  You don't need to load a driver for the PERC 6 / i in Server 2008 or newer version, the driver is 'native' for Windows.  If you think that you need a driver, I suspect it is because you tried to install and it is not all discs.  If Yes, do not forget that PERC does NOT support RAID/JBOD, then you must configure disks to a virtual disk (VD, matrix RAID) before they can be presented to the OS.  It can be configured in the CTRL-R utility (be sure to check the boxes of progress/Initialize options too).

• What is the best way to move the node for virtual device to an IDE SCSI hard drive?

  I used PowerCLI on vSphere 5.0 5.5.

  I'm deploying VMDK that were created with a switch in Ghost from Symantec, which by default is the HDD to IDE interface.  How can I change the HD of IDE, SCSI using PowerCLI?

  We also seek to regenerate the VMDK with the correct setting in Ghost, but maybe it's not feasible.

  I looked at the post below, which seems close, but don't tell me how to change the Type as the disk ID number.

  Sort of put the virtual device node / drive SCSI ID?

  When I look at the vmdk on the host for the virtual machine, I can see that the ddb.adapterType field is set to "ide" and KB 1016192 - conversion of an IDE virtual disk to a virtual SCSI disk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1016192

  I need to have the value of "free", but I can't manually change the vmdk file.

  In addition, the hard drive has the VM operating system already installed on it, so I don't want to just remove it.

  Another related problem is that I can not put the type of SCSi LSI Logic SAS controller LSI Logic parallel (Windows VMs does not start if it has the value LSI Logic SAS). I just get an error "inconsistent backup specified for device 0.

  Appreciate any ideas.

  I thought that I would come back and update this post.  I got it works by changing a setting when I create the VMDK.

  I changed the way I created the VMDK via the Symantec ghost32.exe (version 11.5?) application by adding the following switch:

  -vmdkAdapter = free

  Ghost32-clone, mode = restoration, src = 'SRC %', dst = "% DEST" - vmdkAdapter free course =

  It worked for my Windows 2008 VMDK, don't know what he'll do for any other type.

  At the end of the day, I have never able to edit the VMX of PowerCLI file, although I got close enough.

  Regarding PowerCLI, I think I have corrupted files on the ESXi server and could never get around it. The steps were roughly as follows

  1. the Copy-DatastoreItem cmdlet to copy the file vm.vmx on the desktop of the local computer

  "2 use Get-Content to read file and change ddb.adapterType ="ide"with ddb.adapterType. =" free ".

  3. copy a ConvertTo-LinuxLineEnding cmdlet from the internet and remove CR/LF characters to the BYTE level; because nothing else has worked.  I still don't think it worked 100%.

  4 copy-DatastoreItem to copy the vmx file to the directory of the virtual machine.

  The vmx file has the correct setting and looks ok, but I think something is broken here, because when I use the VI Client to look at the data store, there are only 2 files in the directory. I don't know which more.

  5 remove-hard drive

  6 New-hard drive - vm $vmObj - diskpath "[datastoreName] vm/vm.vmdk", at this point, I get "the path of the specified disc is inaccessible or does not exist.  It is probably because I have damaged the structure of files on the data store.

  When I delete the virtual computer in the VI Client, I can remove it with success, but I have to manually delete the directory on the data store using skip
  Control data store.

  Maureen

• Time machine HDD not fixed by first aid to the disk driver

  My 1 than to Seagate HARD drive works well, but recently, did not properly. Suggested that I use the disk driver. I ran first aid, and who ended up with first aid process has failed.

  Can I just throw the HARD drive and get a new one, or is there something else I can do.

  IMac early 2008 using OSX v 10.11.5.

  Thank you, John

  I just throw the HARD drive and get a new

  Yes.

  Even if disk utility is able to 'fix' a hard disk dive, it is bound to fail once again, sometimes in a very short time. Replace it.

• importer of cd for ipod touch 5 with no disk drive

  Hello

  I have a macbook pro retina mid-2014 running Mavericks OSX 10.9.5 no disk drive and I would like to buy a series of CDs for the purpose of importation on my ipod touch 5: what is the best way to do this please?

  Thank you

  Buy and use an external optical drive connected via USB. Apple sells a. Most of the other USB external optical drives work very well. It is better to get a powered by AC power from the USB bus vice.

  If you have another computer with optical drive, you can use the disk share

  Use the CD or DVD drive from another computer with your Mac - Apple Support

• Laptop HP 430: I can update/modify/update my disk driver or adapter and processor to display in my laptop HP 430

  Can I update/change/update my disk driver or adapter and laptop display in my HP 430 PC processor? If Yes, can you tell me where? If I need to go to the service center near our location for the upgrade or update. And what is it. Thankyouuu in advance for the answers

• Disk drive not found in the Satellite P845T-102 (Code 19)

  Hello

  I recently bought a Satellite P845T-102 and the disk drive is not recognized by Windows (Windows 8). Does not appear in my computer, has no light and will not eject.

  The drive is a TSSTcorp CDDVDW TS-U633J.

  This is the first time I tried to use it so I don't know if it was never acknowledged, or if a windows update caused a problem.

  Troubleshooting it says my driver is up to date, and Manager of devices displays the following message is displayed:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I have tried to uninstall the device in Device Manager and rebooting without success and have also tried to download the driver on the Toshiba site.

  I would appreciate any advice to help solve this problem.

  Post edited by: gt79

  I put t know if this will help but check please - http://support.toshiba.com/support/viewContentDetail?ct=SB&soid=445782&ref=EV