PE4 of installation on a Macbook Pro

Similar Questions

• I just got an upgrade DVD Amazon's LR5.  There is no option .pkg for installation on a MacBook Pro.  Only setup32.exe, and setup32.64.  What should I do?

  I just got an upgrade DVD Amazon's LR5.  There is no option .pkg for installation on a MacBook Pro.  Only setup32.exe, and setup32.64.  What should I do?

  You can try to download the Mac version and using the serial number of the drive.  LR serial numbers are normally good for both platforms.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• CS6 installation fails on Macbook Pro retina

  CS6 installation fails on retina Macbook Pro (10.8.2)

  I downloaded the demo CS6 Design and Web Premium and tried to install. It downloaded fine and I can open the .dmg file, but now when I click on the application of installation I get the error message "setup initialization failed. Please download Adobe Support Advisor to detect the problem. "I did as he said, but he found nothing. I deleted the trial and downloaded the demo of Master Collection CS6 to see if the result was different... it wasn't. Received the same error message. I looked so other forums and I tried their methods to solve this problem, but I had no chance. Time is a bit of gasoline. Start school in a few days and a Photoshop, InDesign and Illustrator class is difficult without Photoshop, InDesign or Illustrator.

  Someone knows what to do?

  -Dylan

  I tried a new account and it failed.

  I seem to have found a workaround. I used the application related Manager HERE http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4774&fileID=4438 and my problems have been solved. I was able to install all of the CS6 programs with this Manager. Must have been send me corrupted files or the Manager itself was corrupt.

  Everything downloaded, installed and updated perfectly. I didn't make you I had any trace of deleted previous attempts of my computer and then downloaded the app handler.

  Very weird solution but I am glad it worked. Thank you.

  http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=4774&FILEID=4438

• Photoshop CS6 test installation freezes my Macbook Pro

  Hey all, here for you question.

  I have a 2.4 Ghz Macbook Pro with 4 GB or RAM running 10.7.4. Whenever I try to install the Photoshop CS6 (or any other trial besides), the installation stops at half way through and crashes my computer.

  I made sure I uninstalled all my other stuff CS5.5 and even downloaded the Adobe cleaner to clean my system. I even went through AppZapper to get rid of all the other stuff CS5.5 too and yet it still happens to me.

  Any idea what's going on?

  Thank you.

  I finally got to work. I tried to load it via Safe Mode, one last time and it worked.

• CS6 first installation on a MacBook Pro.  Cannot find the serial number.  CS5 owner all the way back to CS3

  I try to install CS6 Design & Web Premium on my MacBook Pro for the first time.  I can't find the serial number.  I own CS products completely back to CS3.  When I try to install CS5 (with serial number), I get an error message saying that it cannot find a previous version.

  Help!

  Lost serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html

• Flash player installs on my Macbook Pro OSX version 10.9.2... Help?

  I can download the installer and the same get flash downloaded before it tells me to close safari near 50%. When I close safari it appears with the same error massage as if I don't close. I made sure my security setting will allow the modules and called to start several times, what I am doing wrong?

  1. click click the apple in the upper left corner of the screen.

  2. select Force Quit.

  3. close Safari

• Questions new installation HD SSD for MacBook Pro

  I followed the online instructions how to install the SSD for my MacBook Pro. I then rebooted by Mac in recovery mode and formatted the drive in Mac OS extended (journaled). It was a little bit tricky message sometimes giving such as erasure of disk failures, but eventually it worked. I selected to install the OS on this HD. The image of the OS were first shown on OS X Lion, but my current OS is El Capitan. I just figured that he was installing the original operating system provided with the mac. The installation went well but then we he had finished wen timer back to 1 hour, 46 minutes. He made several times and after 6 hours, I decided to leave and start over. The second time after erasing HD and formatting again the OS that came was El Capitan for installation so I continued. This time, the installation has been completed and at the end says "OS could not be installed on my computer, reboot and try again." On the third attempt has received a similar message from the failed to install ' year error occurred during extraction of the files in the package "Essentials.pkg." " »

  Anyone has any idea why this doesn't work or suggestions please?

  About 2 months ago I reformatted my HD original as installed latest OS El Capitan as the mac has been slow. Does have a report with questions I get on doing the same thing with another HD?

  What model of MacBook Pro?

  Which SSD model?

  You have another Mac?

  Possible causes:

  -Incompatibility of your Mac with this specific SSD. Recently, some users have reported what appears to be these incompatibilities

  -You damaged the cable flex between the drive and the system board.  It is a common problem and causes intermittent problems initially and if it's even worse the Mac will see is even more disk

  -You have an another hardware problem as RAM bad or other component.

  I'd do it

  -Run Apple Hardware Test

  Using Apple Hardware Test - Apple Support

  -Connect an external drive and install OSX on this disc and boot from this facility and see if you have any problems

  -If you have another Mac download a compatible OS x Installer for the Mac App Store and create a USB bootable using device

  http://liondiskmaker.com/

  and install OSX on the SSD.

  This is the Office Mac Pro forum. I asked that your post moved to the appropriate forum.

• guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

  The guys that I need help please,

  Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

  I need help please

  Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• MacBook pro 2011 very slow to load anything, download applications, installation of El Capitan...

  I am a computer scientist, to work on a Macbook Pro 9.2 A1286 2010 client; I found first of all that it would not recognize the HD. Then, of course, first a PRAM reset.

  Still no hard drive. So I ran Apple Hardware Diags, he finds that everything was fine... but he did not check the drive, because he did not either.

  So I swapped the HD for the nine existing. Still no joy. Then, I tried the optical drive SATA port using a trolley car, and it worked.

  So, now I think to myself, I just need to replace the original HDD SATA cable.

  But in the meantime, I now use this optical drive SATA port to install an operating system.

  So I'm intstalling El Capitan... and he's going VERY slowly... said 27 minutes left, then after even 30 minutes, it says 26 remaining minutes... even for every minute of time estimated to the left. Hours trying to install what should move a lot more quickly. Two SATA ports run at the same speed, so that wouldn't make any difference.

  I have about 20 + Mbps download speed, and I d/l El Cap several times before on this same bandwidth and it goes as one might expect.

  Also, I noticed in trying to engage around all preparation of the installation, everything seemed to be in slow motion, with a lot of time-outs of spinning, before of the OS responds... even trying just to get the pop down menu, etc. It is a system with no operating system, just off the coast of the temp install DVD or USB operating system installed.

  The summary is that something in the firmware seems to be wrong. I find that there is a SMC and EFI up-to-date, but who can not install without the latest OS, so the attempt to d/l El CAP.

  I'm looking for light bulbs go out there as to what might slow down this computer that doesn't even have a hard drive running an OS yet?

  Thanks in advance for any input you may have.

  Ironic

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan activity. Also, visit The FAQ XLab and read the FAQ on the treatment with The Spinning Beach Ball of Death.

  Download and reinstall OS X El Capitan 10.11.4 Combo Update

  
  

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• The installer stuck on my new MacBook pro

  It all started the installer of MacBook Pro and the screen is blocked on setting up your Mac... rainbow color wheel continues to turn. Been almost an hour now. Help please!

  Press and hold the power button until the screen goes black.

  Wait 10 seconds, then press the switch once at startup.

  Make sure that your Mac is connected to a source of power not only functioning on battery to go through the first time boot sequence.

• Try to reinstall osx to sell the macbook pro, but when it starts to install I get a window saying 'impossible to find information about this installation machine' "contact applecare".

  I erased from my hard drive to sell the macbook pro to my father.  "" When I go to install OSX I am invited to install OS X El Capitan and it will check computer and a window pops up saying 'Impossible to find information about this installation machine' "contact AppleCare.  I have an APPT with the Apple store Monday, but was hoping I could fix myself first.  Anyone have any ideas?

  When you disassemble a machine for sale, the only Mac OS X can be installed without providing WHAT YOUR Apple ID is the original version it comes with.

  You can not install ElCapitan in this situation, what is left as an exercise for the buyer.

• Installation SSD Samsung 850 EVO on 13 in Macbook Pro with El Capitan

  I bought a Samsung SSD 850 EVO solid state drive and installing the end 2011 girl 13 "Macbook Pro running El Capitan.  Before the installation, the drive was formatted by disk utility and then cloned with the CCC.  The reader will not be able to boot up the laptop and and when selected as the boot disk I get the following: bless tool was unable to put the current startup disk.  There are several 'solutions' on YouTube, but they have not quite caught up El Capitan.  I tried to go back and formatting the drive with Snow Leopard then coming forward, but that doesn't work anymore.  It was the idea of "geniuses" at the local Apple Store.  Any thoughts?

  dnatino wrote:

  I bought a Samsung SSD 850 EVO solid state drive and installing the end 2011 girl 13 "Macbook Pro running El Capitan.  Before the installation, the drive was formatted by disk utility and then cloned with the CCC.  The reader will not be able to boot up the laptop and and when selected as the boot disk I get the following: bless tool was unable to put the current startup disk.  There are several 'solutions' on YouTube, but they have not quite caught up El Capitan.  I tried to go back and formatting the drive with Snow Leopard then coming forward, but that doesn't work anymore.  It was the idea of "geniuses" at the local Apple Store.  Any thoughts?

  There has been some problems reported with disk SSD Samsung SSD 850 EVO and Mac.

  Search you on FAQS Samsung:

  http://www.Samsung.com/global/business/Semiconductor/minisite/SSD/global/HTML/Su report/faqs_01.html

  a bad drive?  http://Apple.StackExchange.com/questions/181136/you-can-t-change-the-startup-DIS k-for-the-selected-disc

  Try resetting the NVRAM EXTRA memory http://support.Apple.com/kb/ht1379

• I lost the installation disc, I have a XP OS on an old laptop IBM I would use INSTEAD on my macbook pro (which already has Parallels Desktop) - is it possible?

  I lost the installation disc, I have a XP OS on an old laptop IBM I would use INSTEAD on my macbook pro (which already has Parallels Desktop) - is it possible? I don't have a cd on my laptop burner - can I use an external hard drive

  OEM license...  N °

• How do you get Silverlight to work on a MacBook Pro. I am stuck in a loop of the installation, installation, uninstall, uninstall.

  I contacted Microsoft and Netflix to try to resolve the problem.   I have a Macbook Pro.   I used to be able to stream Netflix.   Then, suddenly, I can't.   I tried to uninstall and reinstall Silverlight, and I can't seem to do.   I called tech support and they sent me here.   Obviously, there is a version of Silverlight on my computer I can't see or find that I need to get on my hard drive in order to make this work.   Any assistance in this matter would be greatly appreciated.

  Hello

  1. don't you make changes on the computer before the show?
  2. What is the exact error message?

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2:

  Try to uninstall silverlight by following the steps:
  a. click on Start menu.

  b. go to the control panel

  c. open Add or remove programs & characteristic.

  d. choose Microsoft Silverlight in Add Remove Programs dialog box.

  e. click on remove

  f. it asks confirmation.

  g. click YES to uninstall Silverlight.

  Reference: Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  
  Method 3:
  Try the steps to manually clean a broken Silverlight installation:
  How to clean a facility damaged Silverlight and then reinstall Silverlight
  http://support.Microsoft.com/kb/2608523
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

  You can display the query in the Silverlight forum for more help:
  http://forums.Silverlight.NET/

  Reference link:
  What is Silverlight?

  http://www.Microsoft.com/Silverlight/overview/default.aspx