[PE9] noise or no sound during export

Similar Questions

• No sound during export to tape

  I'm trying to export a SD sequence 4:3 on tape DVcam using a Sony DSR-40 via firewire. After changing the MPE for just the software, I get a video signal to tape, but not the audio. Sequence and the bridge are both set at 48 k.. EEMS that I must be missing something. Any thoughts?

  Audio is normally set to read on the computer.  Change this in the settings of reading so he goes on FireWire.

• No sound during calls, fine rings, test in options button-> noise audio playback ring

  My sound does not work very well, the test under options-> audio button playing the sound of the ring. Yet when I call the echo test or any other organization they can hear me but I can't hear anything. I hear it ring when they call me, but I hear about them.

  The answer was in the last answer. I had to remove the audio device from the Device Manager and make sure to uninstall the driver, and then restart, after which he replaced with a device called simply "high definition Audio Device". Now it's working.

  Please note: you have a bug in your test under audio settings button. So who plays with his success when you can play sound during a call, it is not a valid test. You should do the same in both cases.

• iPhone 5 c does not always sound during calls to the.

  iPhone 5 c does not always sound during calls to the.

  Is do not disturb on?

  This is the icon of Crescent Moon at the top right of the screen

  If yes – you can control center - activate by sliding upward on the homescreen of the lower edge and tapping on the icon

  If this is not the case - check to see if these contacts are in your blocked list

• Dell order configure 3.1.0.250 crashing during export to exe

  Dell order configure 3.1.0.250 crashing during export to exe. I tried on two different machines with the same result. I have .NET Framework installed 4.5.2. Here's the report from crashing Windows.

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: cctkgui.exe
  Signature of the problem 02: 3.1.0.0
  Signature of the 03:559147 c 2 problem
  Signature of the problem 04: WindowsBase
  Signature of the problem 05: 4.0.30319.34209
  Signature of the 06 problem: 5348b4e9
  Signature of the 07 problem: f61
  08:6 problem signature
  Signature of the problem 09: System.InvalidOperationException
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 6d8c
  More information 2: 6d8c9c0d6ed9fe2f95cec4737399f068
  Additional information 3: J183
  Additional information 4: d18349a1ed7c01d977b9ab4c0697af85

  After posting the answer, I tried to create an exe from the package of local system and leading to an accident too.

  And also, when you asked for the model of the platform, if you meant what systems the package will be deployed on, his will mainly be on Optiplex 9020 and 9010 s.

• Dell xps l502x freezes making buzzz sound during playback of the audio or video file

  I have a two year old dell laptop xps l502x, who recently started producing some strange audio buzzz at regular intervals during playback of audio or video file.le sound is very similar to the sound when games used to freeze with the same anonying buzzz sound which is a very well known with the XPS L502X.i used only to have problem that the sound during games used to hang , but recently it has begun to occur during playback of audio or video files too.

  RTZ87,

  I just had a quick glance and the solution is in the thread below. Uninstall 'Dell Support help' and 'Dell Support Assist Agent'. They have been automatically installed on your laptop in the last two days and seem to be causing the problem.

  

• No sound during playback of DVD in Windows Media Player

  1. No sound during playback of DVD in Windows Media Player.

  Media Center recently stopped working altogether, the message alleges a solution will be found, but he never comes to the top with one and there seems to be no resolution right ahead of internet, I can see others too have a similar problem.

  So I would try Media Player, no joy it is thinking.

  It reads the dvd no sound, I go into options and make sure the external emu sound card is set, yes all well, but as soon as I put it on youtube videos sound turns off by train to play media player so a sort of conflict, if I close Opera / chrome browser and reopen his is back.

  Update or reinstall the drivers for the sound card in Device Manager, checking the PC or Support Downloads Web page of the card for more recent or different driver.

  Physically, reinstall the sound card to make sure that the contacts and the slots are clean and tight connections.

  If you have an audio chip embedded, try to use it to compare.

  Try the VLC media player to see if it has the same problem.

  Have you updated flash player for your browser?

  Try another browser to compare.

  Establish a clean boot, check for infection and then run the System File Checker of the steps in troubleshooting for Windows 7

  For irreparable system files, run a repair facility.

  It's much lower plant?  If so Clean Up Factory Bloatware and consider to go from worst to best with...

  Maybe it's time for a clean reinstall Windows 7?  The steps in the link provide the best possible installation.

  Report on the results of other ideas.

• I hear no sound during edirting in the first

  ! ! I hear no sound during edirting in first. My sound on the PC is OK as far as I can read audio in Youtube, mediaplayer etc...

  As far as I know nothing is cut and the audio channel not locked. In my effects audio, everything is ready to 0db and on the counters, I can see the audio.

  Adobe Creative Cloud

  IT works again; It was a material setting that has changed during the last update.

  Thank you!

  Hotel groeten / Kind eyes.

  Leo.

  Arcade events Ltd.

  Leo Vereycken

  p/a Lange Schipstraat 40/1

  2800 Mechelen

  Belgium

  Tel: + 32 15 272218

  Cell phone: + 32 479 294202

  Skype: Ingwe40

  Web: http://www.arcade-events.com/

  E-mail: [email protected]

  Van: Jim_Simon

  Verzonden: woensdag 6 April 2016 19:36

  Aan: Leo Vereycken [email protected]>

  Onderwerp: I hear no sound during edirting in the first

  I hear no sound during edirting in the first

  created by Jim_Simon https://forums.adobe.com/people/Jim_Simon> in Premiere Pro - see the discussion complete https://forums.adobe.com/message/8661810#8661810>

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA

• Is it possible to disable the play button during export to exe or app files?

  Is it possible to disable the play button during export to exe or app files? Can the app just start without the playbutton?

  For me it loads instantly on Mac as an application as well. The slides appear automatically, without, I must hit the 'play' button. You can go to preferences - beginning and end and check - Auto Play. If you want to reduce the loading time, choose the Preloader option and reduce to 20 about and republish.

  Thank you

  Anjaneai

• CS6 Indesign crashes during export epub

  My indesign cs6 crashes during export epub. I have windows 7. I uninstalled and installed again, but nothing happened. When I start to export with the kindle amazon program also plugin stops working, theoretically it is not a bug of amazon. What to do. Could someone help? Thank you. I have had no error message.

  I would post your problem in the forum here http://forums.adobe.com/community/indesign/indesign_generalInDesign. They will be able to help you.

• Always get horizontal lines on video during export to 720 x 480 AVI with "Deinterlace" turned on

  Professional Hello again fine,

  I use 6 first on a Windows 7 computer.

  I always get horizontal lines in my video during export to AVI 720 x 480, even with "Deinterlace" lit.

  I had a doubt on another thread and said robodog2 that it is interlaced with the lines of the file are not displayed when you use a selection of progressive export file...

  http://forums.Adobe.com/thread/852077

  So I found the box "Deinterlace" via "chronology of export > movie > settings > special treatment > Modify > deinterlace ', but if I have this box checked, I still have horizontal lines.

  Here are the screenshots of the same base video before importing them in at first for an effect reverse, and after I saved the resulting file 720 x 480 AVI... the final file appears with the same horizontal lines if yes or no deinterlacing is checked.

  Lines are more visible when viewing the video in Windows Media Player they appear in these screenshots below... the lines have in fact characteristics of edge in the public eye.  The lines look like an old used TV sometimes when the antenna was not getting good reception.  Also, I am saving successfully the "chronology of export > movie" path with different codecs (this is no longer a file generated from the preview, I was talking about in the previous thread on this)... so I'm sure all the parameters with this version and I get this result with three different codecs, with and without the "Deinterlace" checked... I had the same experience over and over yesterday evening while he was also working with another file.

  No one knows what is the cause?... Please see the pictures below

  Thank you

  digiday

  AVI file of front of record in first -own original 720 x 480, 30 frames per second

  

  After the backup in the first 6

  Horizontal lines showing in this first 6, 720 x 480, 30 fps AVI file

  

  Hi David,

  Yes, I finally solve this problem, based on a chance observation on another forum.  On another forum a guy once mentioned the setting ' NONE FRAME ' in the 'Record Options' in the dialog "Export movie" when I export my movie to an AVI file, as seen in my screen shot below.  Otherwise, I think that setting was failing to "FIRST FRAME ABOVE".

  For the most part, I was getting these terrible horizontal lines when I exported the graphic effects that I created with imported Photoshop layers in my film projects... in these kinds of exports that horizontal lines were much worse and more obvious that if I was just export a project with the actual video that I had imported in my project.

  But still, even with the imported video, as examples of images that I posted on this thread, even in this case I saw the horizontal lines.

  So one guy on another forum said something about "ANY FRAME" setting in my export dialog box.  It relates to something else about deinterlacing it is better for this problem as the "FIRST FRAME SUPERIOR" or "FIRST FRAME BELOW" settings.

  As can be seen in my screenshot below, which is the setting I talk, but I was using the old 6 first of 1999all about, and options in the new versions of first export dialog are different.  The guy on the other forum that mentions that setting, that eventually solved my problem, said that the adjustment did not differ in a newer version of first he used, but I found this setting in my dialog "Export movie" , and that solved the problem.

  It was so simple and I went by so many things to try to solve it, including my files running through other apps to try to pre empt the problem and none of it worked... He just turns out to be THAT simple adjustment "ANY FIELD" and that solved the whole problem.

  First 6 and some newer versions of first, seem to have other problems, such as the creation of an oblong shape, rotation image from a round graph-shaped eggs after importation and applying an effect of rotation, but otherwise, once I realized that the solution of horizontal lines, I did pretty well understand many things in this former first and I got pretty good results.

  Viel Glück!

  

• No sound during editing or rub. EPs

  No sound during editing or rub.

  EPs

  With the help of text - audio speech.

  For some reason, the audio track is represented and rereads in the end of the project. But, there is no playback in edit mode, so I can't ' time my text and images...

  You have any advice?

  Thank you

  Greg

  

  Hello

  Can you check the timeline that the audio is not muted, see screenshot for the audio icon (highlighted)?

  Lilybiri

• Problem of resizing during export (LR3.0)

  I'm trying to export with the dimensions of 720 x 540 pixels. The export picture is 720 x 480 pixels. What I am doing wrong?

  Rick

  As Lee Jay said, you probably have cropped not the image that you are exporting to a 4:3 ratio. One of the good features on export from LR is that it does not distort the images during export, but maintains the ratio of the crop in the image you are exporting and match the version exported to what you have specified. So try to crop your image using the 4:3 ratio from the drop of the crop tool and see what happens.

• Lightroom 6/CC, add noise during export?

  Hi all

  Since the update to LR6/CC, I noticed that eexported images seem to significantly louder that the Lightroom develop overview, patient with me because it is difficult to explain;

  I export in sRGB JPG, adding no compression by means of limiting the file size/affect the quality of the image and add no sharpening, yet the exported images look so loud as they should.

  To combat the problem, I would add 30 Luminance in before the export noise reduction - which makes the images look much too smooth and obviously reduced the noise in Lightroom, and yet the exported JPG looks like the forecast develop did before adding... weird noise reduction.

  Everyone knows this and know a way around which is not to add before the Luminance export?

  Thank you!

  A by-side screenshot showing the view to point to 100% / 1:1 zoom and the exported JPG, also at the 100% zoom would be useful so understand if there is actually a difference or if it's the preview that shows a difference.