Peak to peak

Similar Questions

• How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  It does not work like that. It cannot be scheduled for a specific time.

• BIAS Peak Pro 7

  Hello

  I used to run the Bias Peak Pro 7 on mac os 10.7.5.

  Y at - it someone here to tell me if it works with mac os 10.8?

  Thank you

  Assuming that you are referring to this application: http://roaringapps.com/app/bias-peak, it seems to be at least up to: support OS X Mavericks (10.9).

• Satellite A300 DVD tray will not open and cause high CPU utilization peaks

  Hello

  I have a laptop Toshiba Satellite A300 - 1 MM and I have a problem with the optical drive (Mat * un DVD Ram Uj880as):

  DVD - RAM plateau sometimes refuse to open. The LED lights up briefly, but still nothing. Windows recognize the drive but the plateau of refuses to open. Eject commands the position of work and management of the computer-> disk management will not work. I can open the tray manually but the optical drive will not read any cd/dvd. No error code in return.

  When that happens it cause peaks of high utilization of the processor (from 60 to 100%) in the System Idle Process. Just stop and restart it solve. After that, the laptop also runs fine and the optical drive.

  I replaced Win7 32-bit with a 64-bit version and the problem persist.

  Help, please. Thank you.

  I have the same machine with Win7 32 bit and use several players. Everything works perfectly. On this virtual path, it is not easy to say what may be the problem. The configuration of your laptop is not known to us, and we don t know how you set up your operating system and additional applications are preinstalled.

  Maybe stupid advice now, but you must install recovery image original Vista that you got with the functionality of your laptop and test with the factory settings. If the same problem occurs we can chat about it.

• Hello! so, recently, I dropped my macbook pro! I was in public so I had no time to peak it upward and examine it! So, I just put is right back in my bag! It was a long dropp 1.6 feet! the flashing on the lower front part but the screen won

  Hello! So, recently, I dropped my macbook pro! I was in public so I had no time to peak it upward and examine it! So, I just put is right back in my bag! It was a long dropp 1.6 feet! on the lower part front light blinks but the screen lights! It also makes a really weird annoying beep I've ever heard for! Don't know what to do! Nothing reallt work screen, keyboard! but some how it turns on but shows no sign of working again! Help is needed!

  (Sorry for my bad spelling)

  Take it to a Genius Bar.  Assessed it the damage and get a repair estimate.  The evaluation is free.

  Locate your backup, you may need it.

  Good luck.

• What should I do to make my music release, I tried to restart my phone but it is frozen on the peak of Apple's music. There is no sign in or buttons to click and I can not get to any of my music

  Ive tried everything to unfreeze it, but it won't unfreeze. It is stuck on the peak of Apple's music and I can't go to my music at all. I tried signing in and out and even turn off my phone, but it does not work.

  Try double pressing the 'home' button and drag the application to the top music. Then hold down the sleep/wake and the "home" button until the Apple logo appears. -AJ

• How are Tone defined HB (RMS, peak) power PORT?

  Hello

  Just thought on how is the PORT HB your powers defined.

  Example for a PORT1 (1 your HB Source, 40dBm), it is said the Pwr is the amplitude.

  This means that it is a middle power, RMS power, or absolute maximum power?

  I found the answer to my own question.

  I tried to experiment a PORT1 of 40dBm (10W) @ 50 ohm with a 50 ohm load.

  I put Vmeter and Imeter in the interval to display sinusoidal waveforms

  Vpk = 31.62V

  IPeak = 0.6325 A

  Ρcrete = 20W

  PMR = CIPP/2 = 10W

  This means that the PORT in MWO powers are in fact RMS or mean values and not absolute peak of your power.

• Tool search peaks

  Hi all

  I'm new to the forum, so my apoligies if this problem has already been dicussed. I'll try to find the first 100 highest peaks of a temporal record of pressure which is actually a series of weather phenomena (see Figure) with the tool Find Peak. My problem is that the algorithim is grateful for "secondary" in the event of impact even tips. I thought at first the signal filtering to remove noise high frequency and 'secondary' summits and then use the pics to find, but the magnitude of the peaks is important. So I need to return to the track of original time. Any ideas?

  Thank you.

  Josef

  '

  Hello

  I have attached a scenario and a layout of the VIEW. The script loads the data of the folder the script is in and load the page from the same folder layout. You probably need to adjust the file name of your specific data file name. The script uses the extensions again in 2015 DIAdem, so please make sure you have this available version.

  Let me know if it is close to what you are looking for.

  You will see for the area detected by the script and the peak found in each box labled with a small symbol. I added a few comments to the script to explain what it does. Let me know if you have any questions.

  Andreas

• peak hold dasylab lite

  I'm going to build a system to display the hydraulic pressure to tip during an impact event. I use a pressure sensor high frequency Omega DFX101 - 5K, an Omega VAC - PS1 power supply, OM-USB-1608 acquisition, Windows XP, DasyLab Lite, SuperLogics forn small PC, HDMI display. The advanced event lasts about 3 ms and I want to hold and display of pressure Ridge on a digital meter as large as possible on the monitor. I also need to compile the file and run it on a client computer running the Runtime. Not much, right?

  With DASYLab Lite you do not have the module of statistical values, but you should have a way to block / Peak Hold module. Configure for Cumulative Maximum. Display in the digital meter set to display the Maximum.  You can make as big as your monitor digital meter display.

  With DASYLab Basic or Full, you have more options.

  With DASYLab Lite, you have the Options-> key Actions that allows you to define an essential feature which can reset the average block module when you click the key combination.

  You cannot compile DASYLab in an executable file. The license of DASYLab Runtime executes existing spreadsheets (files *.DSB). You must ensure that the DAQ configuration is the same. With a single device, which should be easy.

• Calculate the peak-to-Peak Amplitude

  I wonder if it is possible to calculate the amplitude peak to peak of a sine wave. I have a waveform of a proximeter for a period of ten seconds and would like to calculate the amplitude peak to peak for each cycle.

  The DIAdem analysis window has a peak/Valley feature that will allow you to find the peaks and valleys of a signal.   Depending on the exact service you use, you can either keep those results as a 'results chain' or a new property of the wave.  Whatever it is, once you have found the peaks and valleys, you can add the pic to the absolute value of the value to find the full peak-to-peak amplitude.

  If you need to do this in an automated way, you can write a script fast enough to call these functions programmatically.

• TC data show the HF peak

  I have a 1102 I read in 32 TC data channels with.  Attached is a screenshot of a band chart showing data and as we see there are HF narrow peaks in the data with a dT of 2 degrees.  I say HF only with regard to the acquisition of 1 Hz rate.  Any suggestions on how to calm up to 0.5 degrees of noise dT?

  two options:

  1 - Use a filter.  A median filter is known as the peak 'killer '...

  2 - find the root cause. analyze the configuration & ground (ground loops?), increase the sample rate, seek sources of EMC noise (power devices: pumps, heaters, room ligth;) RF devices:,...), connect a scope, look at correlations.

• filter the peaks on the signal from ECG pulse!, help!

  Hello

  I have RCV of the ECG signal. I filtered the ECG signal and get the resource (interval between each pulse of ECG) records.

  

  The source of the signal have noise I use a threshold but sometimes spikes of failure. Like the previous capture. Normally, if you get a pic of fault detected, I'll try to find this index to add to the left or right of the peak, normally I add to the lower value. This works if it has only a bad impulse between 2 good.

  The problem come when I have more than a ridge between the two coupons.

  Also, when the impulse of R a loss threshold I have trying to find the index and get 2 new reading making division 2 peak value.

  I have attached the method I've used to adapt it. I only works if I have 1 Ridge added on real measures of R or pulse 1 loss R, when I have several pics no work.

  I would like to hear an idea to make it work better. I don't like the idea of removing the value interval, I have 2 hours of reading and if I remove the values I have lower data outoput is why I tried to summarize or division of values to get the correct reading without losing any data.

  Perhaps, there is any better filter for ECG of entry, so I have a R-own pulse and less noise between ECG pulses.

  Any advice is welcome.

  Best regards, Fred.

  Almost.  in the last step, you have extracted the real part of the complex waveform.  Instead, you must retrieve the extent.

  

  BTW, this idea isn't mine.  I got from this article

  http://www.ScienceDirect.com/science/article/PII/S0010482501000099

  

• Feedback loops for the algorithm of peak power of solar cell

  Hello. I have some experience with Labview but I am struggling with the structures and feedback. I have an instrument that defines a load power voltage and measures. It will be connected to a solar cell that has a peak power (see the trace on the photo). I need a simple program that will make the instrument to oscillate around the point of maximum power. He must set the voltage, power, add a voltage increase, measure power, then add or subtract the voltage according to the question of whether the power has increased or decreased from previous measure. I am attaching a schema. Start V and delta V will be given and fixed. I don't know how to implement with Labview code. Thanks for any help!

  Hello

  Search here for a simulated a simple peak loop

  It allows to store the previous registry data at offset

  e time delay without the processor and also to simulate the transfer of communication with instrument

  concerning

  Tinnitus

• Peaks above the threshold

  Hi all

  I changed one of the examples of Diadem to return the heights beyond a given threshold in a series of data. This works fine for a single data file using the script below. Now, I want to modify this script to individually perform the calculation on a long series of (too large for concentenate) files every time that record the results in a new data file. I enclose the code that I use and some many simplified data files. Could someone explain to me how this next stage of script or maybe post a code example of something similar?

  Thank you

  Option Explicit ' force explicit declaration of all variables in a script.
  Call ScriptInclude (AutoActPath & "ThresholdPeaks.VBS")
  Dim i, Xch, Ych, threshold, MinDev, MaxMin, EndTime
  Dim CursorType, CursorMode, CursorX1, CursorX2, CursorZoom

  Dim MyFolders()
  Call InitMyFolders
  '-------------------------------------------------------------------------------
  Void InitMyFolders
  ReDim MyFolders (1)
  MyFolders (0) = 'C:\Find all Peaks\'
  End Sub
  '-------------------------------------------------------------------------------
  Call DataFileLoad (MyFolders (0) & "Data1", "CT", "Load") '... DataFilename, FileImportFilter, ImportAction
  Xch = 'Time' ' X channel to analyze the peaks of
  YCH = '1 a' ' Y channel to analyze the peaks of
  Threshold = 20' threshold of entry here
  MinDev = 3' (0.. 100) percent of the APA (Peak - threshold) to exclude
  MaxMin = 'Max' "(Min, Max) find local Maxima and local Minima"
  Call ThresholdPeaks (Xch, Ych, threshold, MinDev, MaxMin) ' find spikes

  Hi Mark-

  The code sets the Xch and Ych to constant string at the beginning of the script names.  When you search the channels by name in the data portal, DIAdem will start at the beginning (top) of the Data Portal and stop at the first instance of channel finds it suits on behalf of which you are looking.  That is why, since your threshold the script is always via the channels 'Time' and '1 a' the first channel group, even when new data files are loaded.

  To fix the script, you will need to modify the code to reference the channels by group name and the name of the channel, instead of just the name of channel - and you will need to do inside the loop that takes care of each database in turn.

  e.g. Xch = Strain2/Time"."

• output signals of the rectangle a PEAK sine wave conversion

  Hello

  I have a question on the treatment of a PIC16F84 output signals. It seems that the simulation of Multisim does not work properly - but before I blame Multisim, I ask the community NOR or software engineers or a solution. Because I'm German, you are invited to continue this thread in German if it is allowed by the rules of the forum. If you need additional information to analyze my problem, I'll be happy to provide.

  The circuit itself has to convert "composition by pulse" signals "tone" (DTMF tones). So you can get old, classic phones work on new devices that do not support the "composition of pulse" more.

  The circuit is powered by the analog telephone line current loop line. The PIC is provided by a rudimentary voltage regulation and count pulse signals (voltage failures / power interruption on the telephone line). After that the captain means the series of impulses in their equal number (e.g. 3 pulses = number 3). The captain gives finally two signals with different frequencies to generate a DTMF tone (e.g. number 3 here is 697 and 1477Hz). As you can see in my PDF file attached, it works very well.

  Now I have to convert the rectangle wave given by the captain to an at least similar to a sine wave form - otherwise the device that receives the DTMF tones won't understand them.

  So I connected a low-pass filter at the output of the PIC. Now, expect the rectangle signal to be smooth in a way as the 'e-function' will (loading / discharging a capacitor through a resistor). But the results are very far from that - as you can see I have very strange curves.

  When I implemented a frequency generator with the same output signal as the PEAK and the low pass filter even I get curves as expected.

  So we can say that the output of the PIC works like a frequency generator in my circuit. But why does the filter not behave as it should?

  I've tried a lot of different values for the parameters of my RC-filter and simulation - this does not solve the problem.

  It would be nice if someone has any idea how to solve this problem.

  Thank you.

  The output impedance of the PEAK may be too high. May be that my car 50 output? Try scaling of impedance of the filter.  Do the 10000 ohms resistance and capacitor 10 nF.

  Lynn

• Min/max to accumulate dasylab peaks? Is this possible?

  In collaboration with Dasylab 10.  I'm looking to collect peaks min/max on a form of sinwave we will run.  Is this possible?  If so, how?  Or I have to just to oversample and sift through data?

  Thank you!

  Select this option.

  Use the statistics module called Minimum / Maximum.

  This will display the value (you choose minimum, maximum or both), or will display a TTL signal, with a peak TTL (5V) to record highs.

  Adjust the hysteresis value to avoid detection from noise and spikes, or use a moving average to smooth out the signal.