PERC 6i to H700

Similar Questions

• RAID controllers

  Does anyone have a good link which explains the differences in Dell RAID controllers and accessories?

  For example.  The same controller works in the 2950 Dell R710 like?  How are the different cables?  Are batteries and cache different?

  In general try to understand what goes through one server to another in the Department to RAID Dell.

  Thank you

  All the info is here:

  http://www.Dell.com/learn/us/en/04/campaigns/Dell-RAID-controllers

  Although it isn't everything in a nice chart - you need to read all documents to get answers.

  Easier way? Ask here.

  CarterIT

  The same controller works in the 2950 Dell R710 like?  How are the different cables?  Are batteries and cache different?

  In general, the parts are designed to compliment the tech in the server, doesn't provide backward compatibility for older, less advanced hardware. The 2950 takes the PERC 5 / i, PERC 6 / i SAS 5/iR and SAS 6/IR. The R710 may take a PERC 6 / i and SAS 6/iR, but also uses the S300, H200 and H700 controllers.

  PERC 5 and 6 PERC use a SFF-8484 connector; the PERC H200 and H700 use a connector SFF-8087.

  Batteries must be the same, but the cache size and type are different (PERC 5/6 have 256 MB; H700 has 512 MB and 1 024 MB).

• PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

  Hello

  I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

  Best regards...

  Grolle,

  Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

  If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

  I would like to know how will install it.

• Dell Power Edge R410 & Dell Perc H700 modular F2WGY

  Hi guys

  Need some advice please, a few weeks ago, we bought a Dell R410. This came with a modular 6/ir Perc. However, when we arrived at the installation of drives we noticed that the controller did not recognize disks larger than 2 TB. It's not good because we need to use 2 x 3 and 2 x 500 GB disks in a RAID 1 Configuration.

  After Googling autour, I came to the conclusion that the card that it came with the "Perc 6/ir' does not support disks larger than 2 TB.

  So, I advanced and bought a new modular a "Dell Perc H700 F2WGY" controller which apparently supports disks more great.

  the controller came yesterday so I removed the old Perc 6/ir controller from the slot in the bottom of the map editing and trendy "Dell Perc H700 F2WGY" modular at the same place. : Photo of slot, I inserted H700

  H700 card: see picture

  PERC 6/ir map: see picture

  Anyway, once I inserted the card and started, I was presented with the error; "PCIE training error" system HALT.

  Obviously this would not start any further. So I brought the wrong card? im confused at the moment between modular and integrated? the pcie slot is low for integrated only cards?

  I then add the new map on the PCIE Top slot. the system then started and he could see the card. However, it found no readers?

  What exactly I do bad will this card work at all? or I'm out of luck and need another card?

  Cappilio,

  The problem you are experiencing is due to the model of the H700. Map H700 modular version is actually designed for the blade server Poweredge series. The model that you would need is the H700i which is the version that is integrated, designed to go into the white storage controller slot you are talking about. The references are KK67X and CNXVV. The latest model of the H700 is the H700A which is the adapter, it's the model that is necessary for installation in a PCIe location.

  This link explains in detail in the overview H700 - http://www.dell.com/downloads/global/products/pvaul/en/perc-technical-guidebook.pdf

  Let me know if it helps.

• Add the disk to the PERC H700 of RAID integrated table 5

  Hi all.

  I have currently a Dell PowerEdge R710 configured with 4 SAS - 2 10 146 k Seagate 2.5 "drives in a Perc h700 integrated Bay RAID-5. I ordered a SAS-2 10 146 k disk Seagate 2.5 "to add to the Bay RAID-5 storage, making it a 5-disc set. What is the best way to add the drive to the RAID-5 array without losing any data? I have OpenManage Server Admin on the server.

  OS: Windows Server 2003 R2 32 BIT

  You can use OMSA... go in storage, PERC, virtual disks and select Reconfigure in the drop-down list of tasks available for your RAID 5.  This will add the disk to your RAID 5, then you will need to adjust the partitions in Windows once it is completed.

• DELL perc h700 battery replacement, please help

  1. where to buy, and what exact model battery... is there a link please if you :)

  2. how to replace it? a guide to how to do it.
  Needs a power Server? Or can you replace it while the server is running?

  3. If I replace it, do I lose my config, configuration raid and other things, as if you take the bios battery, you lose all the config...?

  Thank you, hoping that someone will help me out here, its my first time changing battery...

  BrownGhostDK,

  You can go to Dell.com site and search for the part number 312-0448. This is the same kit for the Perc 5.6. and h700.

  To replace it, you will need to turn off the server and unplug the power cord, then hold the power button to drain flea power. After that then just remove and replace the battery. Power back up normally. The configuration is stored in the controller and will not be lost by replacing the battery. The main role of batteries is to provide the power required to save the data from the cache when the server goes down.

  I would like to know if that helps...

• R410 Sostituzione con PERC H700 hard drive

  Supporto Gentile,

  If line a detailed by the sostituzione di un disco compatibile con quello hoist by R410 Server con controller perc h700

  Speaking Saluti

  Gianluca Ticconi

  Buongiorno, the sto contattando by mail

• PERC H700 RAID 5, 3 disks, 1 Reporting failed and 1 predictive failure

  Hello:

  I have a PowerEdge T410 with a PERC H700, RAID 5 with 3 disks.  The controller reported a failed drive so I replaced the week last with a drive of new/refurbished.  Now only 1 week later it reported another drive has failed and the drive replaced as predictive failure.  Looks suspicious, i.e. I am doubting the controller card.

  I think updating the firmware of the controller first, but not sure if I should replace the faulty drive first, i.e. If updating the firmware could cause table failure.

  Also, if I install OpenManage on a virtual machine (host is ESXi 4.1), OM sees the controller?

  Thank you!

  Start on our live image and export logs of the OMSA facility there. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=CWF92&FILEID=3550743303&osCode=WS8R2&ProductCode=PowerEdge-T410&LanguageCode=en&CategoryID=di

• HARD drive failure e battery perc h700 [CF]

  Buongiorno,

  e' possibile situation UN preventivo by a hard e batteria equal o compatibility disk?

  PERC H700

  DELL ST3600057SS 600 GB SAS hard drive

  Power edge R510 (service tag C3YGW4J

  Grazie

  Ramon Cartabia

  the sto contattando by mail.

• Support for large hard drive PERC H700

  Nobody knows the biggest SATA drives supported by a PERC H700 in a PowerEdge R710? I read on another post that the H700 will support 3 TB disks. Would like to know whether he would support also 4 TB and disks of 6 TB.

  Thank you

  Simon

  Hello.

  I can see 4 TB SATA HD as supported but not 6 TB. It may be supported but not yet committed.

• Upgrade to PERC 6 / R to H700

  Hi all

  I have a T610 with the integrated PERC 6 I / R controller and that you want to switch to a H700, so I can add a second raid 5 array.  Is it possible to migrate raid 1 array existing to the new controller H700? and then configure the new raid 5 array?

  Thank you

  Bruce

  Bigfoot53,

  You can migrate the table since the Perc 6 / i of the H700, as seen on page 9 of this link - http://www.dell.com/downloads/global/products/pvaul/en/perc-technical-guidebook.pdf

  What would be in fact just, it is first of all get a good backup of the data, you should always do when you work with the chart. After you install the H700 and then start the controller BIOS (CTRL-R at the prompt) from there you will highlight the controller and press F2. In the F2 menu, you select foreign Config. Select IMPORT FOREIGN CONFIGURATION in the foreign Config menu! What it will do is indicate to the Scheduler configuration raid on the disks information are what should be used. Then it should import the configuration to the H700. Make sure that all drives are migrated.

  Let me know how it goes.

• PERC H700 adapter w / Cable X394K

  I am upgrading a PowerEdge T310 for a client that was originally shipped with a single HARD drive and no RAID controller (only one hard drive is connected to the mobo).

  I bought a Controller PERC H700 and the cable X394K and hung.  It doesn't seem like something to connect readers to food, with the exception of a connector 12 pin labeld "P3A.  But the server doesn't have a connector anywhere so that I can connect only.  The only thing available is a connector 8 pins on the socket.

  Is there an adapter cable to go from the 8 to 12 pins pins? Or do I need something else than the X394K cable, which provides the SATA data connector and power in a single molded unit?

  Please notify.

  Thank you!

  Hello

  The cable you have (X394K) is not designed for a T310. T310 cable with the right connector is Y690K.

  Thank you

• R410 replace H700 with integrated PERC 6?

  Hello.

  I R410 with H700 controller, but replace it with PERC 6 integrated (I need free PCI-E slot).

  can anyone provide a reference for PERC 6 integrated, compatible with the special slot (white) RAID R410.

  I have hotplug BP, if he cares.

  Thank you very much!

  WingDog

  Well, can you provide me with PN SAS and S300?

  SAS6/iR modular for Europe: HM030
  S300 modular for Europe: Y159P

  These are the numbers of spare parts. New purchases in Europe use a 8 digit CODE. I'm not able to locate a SKU of 8 digits for one of them, so we were not selling retail/cards again more. You will need to contact the service of spare parts when you use the 5 part numbers. Sale of new accessories generally do not have access to sell 5 figures/spare parts.

  Thank you

• PERC H700 drive failure

  Have a PowerEdge R510 with a PERC H700 / RAID 5. Newspapers showed the road 3 has failed, but turned upward. We have replaced (hot swap) with a new one (from Dell). Server administrator still shows as having failed, but turned upward, the logs show nothing except flashing in car 3 / unblinking the defective drive until it was removed (logs do not show the removal / departure of replacement or regeneration). Is there something we're missing in the H700? Thank you.

  Hello

  Install the latest version of the OMSA and check the State of VD. See the link for download with instructions for installation at the bottom of the page.

  http://downloads.Dell.com/FOLDER03252959M/1/OM-SrvAdmin-Dell-Web-WINX64-8.2.0-1739_A00.exe

• PowerEdge R310 and Perc H700

  I have an older R310 which does NOT support the hot-swappable drives and I'm looking to add a raid card Perc H700.  A few quick searches show only cables for installation bottom of basket.

  So I'm not the guy of material more experienced so there cables that go from the H700 to readers SAS?

  Hello

  It should be X394K part number. The description is HARD drive cable. PERC H200/H700 HDD card