PERFECT MOTHERBOARD

Similar Questions

• Motherboard integrated audio system works perfectly for CS5.5

  Hi all

  I'm building a new system to edit with the help of Production Premium CS5.5. We do mostly wedding videos and would need to edit 3 to 4 layers (from 3 to 4 cameras) of AVCHD 1920 x 1080 images.

  I read that you need a compatible sound ASIO as part of the configuration system card required. Will be the integrated sound card on the Asus Intel X 58 Rampage III EX work very well if you like, or should I buy a dedicated sound card?

  Thank you very much

  Kind regards

  Anthony Freeman

  www.freemanproductions.co.za

  Audio on-board is often a better solution than a card dedicated sound. Yes, your audio Rampage works perfectly with CS5.5

• 2013: MacBook Pro replacement motherboard or not

  Brain Trust,

  I need some advice here.

  I have a 2013 fully bridged on (500 GB SSD, 16 GB of RAM) MacBook Pro and the sound from the speakers awefully distorted.

  I did all the regular troubleshooting inclusing a clean installation of the operating system, applications 3rd party and the problem persists.

  The distortion is NOT dependent on volume, it is still there, as if the sound is cut at all levels.

  Now, the headset on the port is perfectly clean, so I think I have it narrowed down to the (material) built-in drivers for speakers. I went to the Genius bar and they agreed and recommend a motherboard replacement. Since I have a month left my Applecare, I could do it, but I hesitate. Professionally, I rely heavily on my machine on a daily basis, and I fear that a machine otherwise perfect with zero problems (other than the problem of speaker) will be messed up.

  What is your experience with a motherboard swap and what do you recommend I do? Live with the distortion and contemplate a great Macbook, or opt for repair until the warranty runs out. NB, I have a very old Macbook that I can use for the week or I'll have to miss my machine.

  I'll answer my own question:

  Do it! I had a fantastic experience! Not only was my main problem, distortion in speakers, correctly diagnosed and resolved, since engineering also saw a small white spot on my screen (who had been there forever), I also had a nine screen. Not only that, I got a new valve and bottom plate, so after 3 years of intensive use, my Macbook Pro looks like new again. Total costs under Apple care program: $0.

  It's really the only problem with Aplle MacBooks: my excuse to buy a new went through the window, this machine will last me a few years ago!

• No automatic updates with the new motherboard. The adjusted settings as advised by your article, restarted the computer - nothing. Downloaded new copy, same problem.

  I get a notification that there is a new update for Firefox and click on it, but the computer is unable to connect to the server and download (if not internet connection works perfectly). I downloaded a new copy and the problem was not solved. I went to your site and set the parameters as indicated by your article, restarted the computer and it is still impossible to have an automatic update as before. (Before the change of the motherboard on the computer of authorized service everything worked fine).

  Try to remove FF from your pc and then it re-download the new version.

• Motherboard MacPro 5.1 update

  Hello!

  I have a MacPro end of 2012, what I am now looking to upgrade. This is the version of 3.33 GHz 6 hearts.

  I want to upgrade into a computer modern games of upgradable - which in turn can be improved for the next ten years or more, but I still want to keep the beautiful original MacPro chassis (which is a bit sentimental for me).

  I think to put a motherboard MSI games standard in there (likethis one), as well as to replace the power supply, maybe fans to liquid cooling and all the rest. Essentially building a hackintosh PC monster game inside my MacPro chassis.

  What I was asking is how many drilling and sawing and tearing out what I need to do to be able to build this? I guess that the card mother apple has specific dimensions, and so I can not just to loosen a few screws out and screw a new in where the old one was. The MacPro is quite strange when open, it has a big weird box inside of him, and the HDD/SSD slots resemble those of a traditional rig.

  It has never been done before?

  I've read other discussions where people looked to upgrade the previous MacPros but they have been met with a response that it is not possible to know how all the pieces in an original MacPro work together.

  Googling: install motherboard from the PC to the mac pro case revealed much success as:

  o-build-using-an-original-mac-pro-case-p http://www.InsanelyMac.com/forum/topic/277025-how-to-the-perfect-hack-Pro-Mac-PR...

  With the help of a case of G5 seems to be easier

  ml http://Build-its.blogspot.com/2011/04/How-to-fit-your-PC-in-Power-Mac-G5-case.HT

  build.1087925 / http://forums.macrumors.com/threads/using-a-Mac-Pro-Tower-for-a-Custom-Computer-

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

• Bad video port, can I get an expansion card video or what I need to replace the motherboard?

  I have a Compaq SR2150NX, the monitor works on another PC, but will not be on this one, so I guess the video port is bad.

  Can I get a plug in video card and install it, or do I need to get the motherboard replaced?

  If I can get a video card, I can't know how to disable the frame on one, I need to disable or how I?

  My computer is a HP 5188-6734 motherboard and I can't find this one exactly, but I found a HP 5188-5588 one on e - bay for about $70, which seems to be and seems that I can tell, exactly like what I have.  Can I replace the one I have with this one without any problems?

  Looking for help.

  You are this posting in the wrong forum, this is a forum of the laptop and is a desktop system.

  Yes, you can get a video card, install and use it.  However, you sure is that the video works is not, or is it possible that the video didn't come out because you have a larger problem as the system's not initialization and display at all, because of a sort of failure such as food or the card mother?

  If you have a spare PSU, you can try exchanging it instead of the original.  If you have a spare video card, even a few old (especially some former) PCI worthless, that you can install to see if you get any screen output.  Note that you need to maybe use the CMOS clear jumper or remove the battery for 10 minutes, while the power supply is disconnected after adding a video card, or by deleting and trying to use the video again.

  I don't know if the specifications of the two Councils are quite similar, you should look at the datasheet for your system and compare that against what ebay sellers asking them is capable of.   Generally if you have a processor socket 775 lines they list and your using the same chipset, you should be able to simply plug in the parts and windows must be able to start pretty far to plug-and-play all the minor differences.  This is the situation in which I expected, you can buy the replacement cards model you mentioned and it works perfectly except possibly having to install a driver or two, but I can't be sure without detailed specifications.  They are very close to the info, I have found, might even be just a 2nd revision of the same Council of PCChips where everything what they changed was a clock IC generator or something similar that would not do your use in any way, except that to be sure, you have the good bios when looking on the HP site for the models with this Council in there instead of the bios for your system model #. If they take even a different bios which they cannot.

• Motherboard crashed on the old computer. Moved old hard drive to new computer to access all the files. I can't locate my extensive library of bookmark on the old drive. Is there a way?

  The old functions drive crashed motherboard perfectly in this most recent computer as drive "F". However I can't find a way to access the library from the bookmarks that I had before moving here, this player to the newest computer then reinstall fresh Firefox.

  Is there maybe any file system or another that has perhaps kept my bookmarks of Firefox library?

  That should not happen, Firefox would have no reason to look for an old profile everywhere except the reader where the active Windows version is installed. Make sure you Show hidden files and folders in folder-> Display Options in Control Panel.

• Qosmio X 870 PSPLXA 00T00E - details of the motherboard

  I have WIndows 7 Home Premium 64 bit on this computer. I have trouble finding information about the motherboard for islet need to know if she will be able to handle the SATA III or has only been designed to SATAII. Also, what is the maximum size hard drive, this machine can handle?

  Thanks in advance for help :-)

  Hello, not long ago I bought an SSD for my qosmio X 870, AFAIK could manage only SATAII, but since most hard drives are SATAll / lll compatible, you need to check on this, "so-called" lll SATA retro-compatibility, I bought a Samsung Evo 850 with 500 GB and it works perfectly!
  In regards to the maximum, that I don't know, but at least 1 TB as the original drive.
  See you soon!

• Work 6 GB/s hard drive IDE oucederomsurlesecondport 3 Gbit/s of the motherboard?

  Hi-
  
  I have HP Compaq DC7700 Convertible Minitowers desktop for home use.
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=3232028 & SPF...
  
  I would like to repalce the HDD (Seagate 160 GB, SATA 3 GB/s) as its problems donations.
  
  (1) do you think that any disk SSD will work with the above motherboard?
  
  (2) if not, SATA 6 GB/s Hard drive with 3 GB/s port of the motherboard above?
  
  (3) these discs hard SATA2 and SATA3 having the same type of power outlet?

  Hello:

  You may encounter a problem if you are installing a drive not HP SATA III any like I did with my dc7800.

  My PC has the first question appears on the document of support on the link below (even if the dc7800 was not among the list of the PCs).

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken & javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02711513-3%257CdocLocale%253D%257CcalledBy%253D & javax.portlet.tpst = ba847bafb2a2d782fcbb0710b053ce01 & sp4ts.oid = 3718645 & ac.admitted = 1379354458533.876444892.199480143

  I had bought a HDD WD Caviar Black 500 GB SATA III and every time I want to reboot the PC or several times in a cold, start I'd get a disc hard not found error.

  Of course, I assumed it was a defective and returned for a replacement disc.  The spare drive did the same thing.

  I have a HP 8200 Elite CMT with a Seagate 1 TB SATA III hard drive.  I put this drive in my dc7800 and it worked perfectly for the last two years, who confirmed to me that the support document affects more than the models listed.

  My recommendation for you would be to get the equivalent Seagate HDD which was in my Elite 8200, which is this one or stick with a SATA II if you can find one.

  http://www.Amazon.com/DP/B004IZN3YI/?tag=mh0b-20 & hvadid = 2478383168 & ref = pd_sl_8m29k5ycix_e

• The change of motherboard Pavillion DV9500 - compatibility

  Hello

  I have a computer portable pavilion DV9500 (code dv9541ev), and as usual for these series, the NVIDIA GPU failed. I got scratches on the screed and the resolution is 640 x 480.  I tried reformatting the chip bad using a heatgun, but I made it worse. Now I think to replace the motherboard. I find many of them on Ebay, but I think that they all are reorganized and I'll end up the same question soon. The reference number of the motherboard is 447982-001.

  I noticed that there are also similar motherboards, not having is not the NVIDIA chip, but the integrated INTEL graphics card. The one I found has p/n 447984-001.

  I was wondering if this motherboard can replace my original one, to have the Intel graphics instead of an Nvidia chip that failed on most people. Both motherboards can use the same Intel processor, from the pictures, I see that they have the same connectors etc. The only difference I see is that the other doesn't have the NVIDIA chip welded. I enclose also a few pictures.

  Does anyone have knowledge on this issue. Any help will be much appreciated

  .

  

  Kind regards

  Konstantinos

  Yes it works perfectly. The mounting holes are in the same place. You could end up with an empty port or must use a dremel tool to open a small hole on the side, but the Commission will work very well.

• Pavilion 500-164: motherboard replacement raises Questions

  
  

  Thanks, Malygris1, for your very comprehensive answer.  Unfortunately, I'm looking forward and installed the new Board of Directors.  For those faced with replacing a motherboard HP, I will elaborate on my trip.  The most important step was in buying for the motherboard.  I have no HP, but from a dealer on Ebay.  I DID, however, carefully note the model of the motherboard AND the designated HP part number of alternatives on a small paper on the motherboard label.  The same motherboard model is used in several models of HP Office; but, if the number of HP spare parts is matched, the info on the model should be on the motherboard.

  My original problems were solved with the installation of the new Council.  After a router struck by lightning, the ethernet port had stopped working, and when told to stop, or in standby mode, the machine would invariably restart.  The new motherboard solved both problems, which seem to be related to the power surge.

  I installed the new Board of Directors of the Windows 10 updated 500-164 and held my breath I have it powered for the first time.  I was pleasantly surprised to see that everything looked the same as when I left it.  Recognized support assistant the new Board of Directors as part of a desktop computer 500-164.  I have not tried; but I hope that the recovery media will work, if necessary.  Malygris1, do you think that if Support Assistant recognizes the info on the model, the recovery disks will work?  I'm curious to know how it works, but, if not, no big deal, as I now have a new image Acronis 10 Windows installation, which works perfectly on the 500-164 Pavilion (without "Pitfalls", as some have reported with audio, etc. of the wireless card.).

  My second concern was whether or not Windows is always activated with the installation of the new Council.  He said that he "Windows is not activated.  ... Rats and other profanity.  I know it can take time to be put in correspondence with the info from Microsoft, so I updated the bios and checked the rest of the ports for the features of the machine.  I returned in configuration/system Panel and he told me that the activation information were "unavailable" - different from the message 'not active' sooner.  I've been waiting on this screen for a few minutes and the message changed to "Windows is activated"!  I was ready to make Microsoft telephone activation and I had run a keyfinder to get the original MS product key for Windows 8 from the hard drive, but I didn't have to use both methods.

  So, in summary, if you want a card mother 'replacement', shop for the exact number of spare parts HP; not only the MFG part number.  It will save you a lot of grief.  Obviously, if you want to 'upgrade' from your motherboard, all bets are off, because it's a totally different scenario with different issues to deal with.  My project was a complete success at a cost of $103 for the new motherboard and several hours of my time.

• Qosmio F10 - problem with the motherboard

  The chipset of the graphics card is overheating. After not long used the chipset losing conection with PBC and portable with a value of $2500 is nothing (my after 26 months). The cost of the new motherboard is about $900. Toshiba is expected to cover some costs of replacement for motherboard fault. Why do clients have to pay for the mistake of Toshiba? It's not fair. I bought Toshiba laptop because they claim that the quality is perfect. A way of 26 months is this perfect quality?
  Thanks Toshiba of such quality. I will recommend your products. Bartosz

  Hello

  I'm sorry for you and the rift that has happened outside the warranty period. But after 2 years, it may be that a material abandon. It was perhaps better to buy an extended warranty, sometimes it really helps in such situations.
  But if I were you I'd just be more anger then rather accept the situation, sell your machine on ebay and buy another. That's the only advice I can give you since toshiba never cover some costs of replacement since then all users who have a machine with outdated warranty wishes to benefit from this service. :)

  Welcome and good weekend

• The upgrade of dv6835nr (dv6000 motherboard) motherboard

  Hello people. I had a perfectly working dv 6835nr computer for four years now and for some reason, it has overheated went crazy. Now, it does not start.

  It's pretty 4 years old lappy with C2D 1.86 Ghz with 3Gib of ram and HDD 250 with a former > Intel GMA X 3100

  I want to MOVE the jury (and the processor maybe) and I'm desperate for a new replacement motherboard and HARD drive in the same chassis (for reasons that I can't buy a new laptop).

  Can people to the HP service center in a the top end of the dv6000 series motherboard? (I think the dv6000 has the same frame, I think than any other top panel with graphics too must match)

  OR if it's possible but not eligible by the people of HP service center, can I go outside, if so where can I get parts... ? Can someone tell me what HP model dv6000 series of cards can fit in?

  Thank you

  Akshay

  India

  I don't know if you have already gone through, but all the specifications of your system, including the motherboard are in the section of this Web site, just type in your model number and download. I don't know what kind of chip (intel, athelon, etc., these websites also proved useful information.) I share this because I recently had a problem with Sony. T Hey claimed that I could not pass my Pentium D processor dual core 4 G ready for windows 7. When I checked my sys. BIOS it said 64 bit ready. Site Web from Intel provide the same information. Manufacturing specified able only 2 G. Cannot always count on manufactured goods. My experience with HP technical support has been a nightmare.

• Satellite L300 - 25G - where can I get a new motherboard and keyboard?

  Hi all

  I have a laptop that has had a good cup of tea (with sugar) overturned on it - the motherboard and keyboard are both dead...

  Where can I get a replacement motherboard if available at all?

  Thanks for any help

  Ben

  Hello

  I'm sorry to hear that, but I think that these things can happen. Nobody's perfect ;)

  Well, you can get a new mother card and keyboard form an authorized service provider. Technicians can also exchange parts and check your laptop (maybe other parts defective too).

  Here, you can search the nearest SPAS:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye