Perform spatial operations via dblinks

Similar Questions

• Message: Cannot perform this operation because the default mail client is not properly installed

  I get the following error message:

  Cannot perform this operation because the default mail client is not properly installed

  Could someone help me please?

  Moved from the community involvement Center

  Hello

  You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

  The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

  Windows Live Mail is popular
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
  Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

  Windows Essentials help:
  http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

  You can access outlook.com via Windows Live Mail

  Set up an email application with Outlook.com - Microsoft Windows Help:
  http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

  After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

  Web-based e-mail services can only be made the default e-mail program in these 2 cases:
  * Yahoo, with the Yahoo tool bar
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
  * Gmail with the installed Google toolbar

  https://support.Google.com/toolbar/answer/34800?hl=en

  Don

• Cannot perform the operation while the host belongs to a Windows domain.

  Hello

  I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;

  Cannot perform the operation while the host belongs to a Windows domain.

  The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.

  Any advice would be appreciated

  Thank you

  M

  FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.

• "no memory to perform this operation? Help.

  Hello

  While I was running an explicit signal project, a window pops up that says "no memory to perform this operation" and "memory is full" in the power spectrum. Then he paused data collection. I wonder where I can set up the maximum memory and let express signal capture much data that I need. Thank you.

  Ningyu

  You push the limits of what can do SignalExpress.  You acquire data points about 8 million (internally, it is integrated 64MBytes, since they are arrays of doubles).  Analysis carried out additional copies of data (the originals must be kept for future use).  To do this, we need to minimize copies of data.  You have several options, in order of complexity:
  

  1. Take your data and store it in a file for later analysis.  Thanks to the acquisition of the data streaming into smaller pieces (10kS in the 100kS buffer) it would be easier to do using the SignalExpress integrated logging mechanism.  When you have finished to acquire data, analyze point by point in a different project, using the log for the entry.  This allows you to cut your use of memory by a factor of eight or more.  Note that the newspapers (which is a binary format - TDMS) can be converted to ASCII, if you wish.
  2. Your input file have specific areas of interest?  You can generate and analyze in pieces.  This isn't my first suggestion, as a power spectrum can be easily generated with segmented data (it is possible and National Instruments sells software for it, but it is not included in SignalExpress).  However, if you can live with ghosts of different power of different regions, this may be an option.  You have not included your file to generate, so I can't speculate further.  If you do so, back up your data to each piece.
  3. If you have LabVIEW, you can rewrite the project relatively easily here (the entire analysis is available as screw).  LabVIEW allows to optimize the memory at a much lower level that the Signal Express (see the tutorial Managing large data sets in LabVIEW, for example).
  The R & D department is aware of this problem of memory and strives to do better.  It is a question with many facets, so generally gets progressively improved with each release of SignalExpress.  If you would like more information, please let us know.

• When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail client is not installed properley)

  E-mail client

  When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

  client is not installed properley) thanks Karen

  When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

  client is not installed properley) thanks Karen

  Hello

  Please see the post below for links to support for all the popular email client programs.

  Where can I get help with my questions by e-mail? (Windows 7)-Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/where-do-i-get-help-with-my-email-questions/461490c7-302b-4cc8-bcd9-127e177d71c3

  Concerning

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.

• Not able to download error summary "could not perform this operation because the mail by default is not installed correctly"

  Victorinox original title: Windows problem

  Im a senior looking for a job. When I'm craig's list and to to load my windows exployer RESUME come with a window that says "cannot perform this operation because the default mail is not properly installed. Can someone give me please a detailed step by step procedure to solve this problem?  Thank you so much Denny

  Hello Denny carguy,

  -Who is your provider of mail service?

  Windows XP has the default Outlook Express e-mail client. To send and receive emails using Outlook Express, you must configure it.

  See the links to find out how to set up Outlook Express in Windows XP.

  How to set up Outlook Express

  Microsoft Outlook Express

• Cannot perform this operation because the default mail client is not properly installed... help

  I can't send an e-mail from a link on a page without getting this error... "could not perform this operation because the default mail client is not properly installed"...    My windows mail is set as default and I can receive and send him good, please help.

  Thank you

  A program is defined as default does not mean that it has considered all of the default roles available.  In the case of Outlook 2007, there are 13 total default values that can be assigned, and it should have each of them.  It is possible to default Outlook for e-mail, but not the default value for write links in web pages.

  HAL

  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?

  I get a message "Cannot perform this operation because the default mail client is not properly installed".  What should I do?

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

  In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook

  Note: Office 2010 Home and Student Edition is not include Outlook.

• Can not open CD player - you don't have sufficient rights to perform this operation Vista Business

  I put a CD or DVD in the drive and double-click it (it can be either a blank disc or an already burned disc just try to see what is on the disk) and every time we get

  "You don't have sufficient rights to perform this operation.

  I'm lost,

  Windows Vista Business

  Hello

  ·        Are you connected the computer as an administrator?

  Method 1:

  You can try running the fix in the below article data and check if this is useful.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  You can check if the third-party application is causing the problem. To determine which application is causing the problem, you can configure the computer to clean the start State and check if that helps. To configure the startup mode minimum State follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

  Original title: loss of entrance of Protocol in the list of saved files

  I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

  Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

  It's a good thing, I thought of the research on other boards for my missing post.

  HKEY_LOCAL_MACHINE\Software\Classes\mailto

  c. in the Edit menu, select new, then clickstring goodwill.

  d. type of Protocol of URL as the name of the new string value

  e. exit the registry editor

• Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Original title: fault of the Explorer

  How can I solve this problem.

  Sometimes when you try to open an attachment, I see this message:

  Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Thanks for your HELP!

  Hi Robert,.

  Thank you for your response.

  Please let us know if you need help with Windows, we will be happy to help you!

• BlackBerry smartphones "your computer must be connected to the internet to perform this operation" during the synchronization.

  My curve has this error message:

  "your computer must be connected to the internet to perform this operation. Make sure you are able to connect to the internet and try again."

  Worked well with desktop manager 4.6...

  Update 4.7 for explode...

  found an article to fix... regedit and change hklm-software-reasearch in motion-syncronize blackberry\

  change the status from 1 to 0

  has worked well...

  until the 5.0 update...

  now it does not work yet, and this key is no more.

  Of course, there are internet and there are no active firewall or any application that might block this traffic, no proxy settings, routing of questions etc...

  There must be the answer to this question... I know that I'm not the only person having this problem.

  Craig

  Hello

  You only need to connect onve, and then you meet the demand.

  I ran twice and I can't logically explain why it occurs.

  On first installation I finally have the PC connected directly to the cable modem, after disabling the firewall software.

  It took about 6 hours with Kapersky to ensure that he did not get infected. It was a friends DM 4.5

  The second was total frustration with version 4.7. On my network.

  I, like you, have the routers and firewalls in front of the cable router if I had a packet sniffer, it would have been easier to trace.

  I reasoned that the PC and applications like explore and Outlook can access internet with out fail.

  I then followed the gateway IP address for my PC.

  In Windows click on start, then run, then type 'cmd' and press ENTER to open a DOS window.
  -In this window type "ipconfig" and press ENTER.
  -L' display the IP Ethernet the subpattern options, etc..  'Default gateway' is what you need.

  -Copy the IP address of the default gateway.

  Then, I started the Blackberry device manager and open the properties Blackberry icon in the systray.

  I was trying to see if I could find what the Office Manager was trying to access, or at least which way he wanted to.

  I found the Blackberry router configuration tab. Click at the bottom right "activate the bindings defined by the user.

  So basically, you can provide a route to bypass "static route. I entered my gateway address default PC, hit apply and OK.

  I did a cold start system, began the DM and he never moans, simply press on the internet and I couldn't access to the

  synchronization options. It worked without changing the settings of firewall or a router. I deliberately left it in place that that

  Gateway IP worked for another program on my PC. (I have mu PC configuration to device on the home network.

  After constant running for a few weeks, I went and deleted the bypass address. 4.7 installation has yet to miss a

  Beat.

  Well, I broke probably 87 regulations of the FCC, all agreements of the RIM, but it worked for me. !

  If I'm not here tomorrow have a drin for me at the party!

  I just installed the 5.0 Desktop Manager and never had the problem.

  So, basically, it's your call!

  The worst that can happen is it doesn't work and close down more away, the best that happens is that you logged.

  I recommend you do a program of "sniffer". This is the one suggested by Blackberry in the KB article

  (Packet capture tool (for example, Wireshark®))

  Let us know what you think.
  Thank you

  Bifocals

  

• Error "You do not have sufficient rights to perform this operation" while trying to format the hard drive.

  Title: insufficient rights to the HD format

  I have Admin rights on my new laptop Dell E-6520, Win7 running.

  When I try to format my modular HD, I get the following message:

  "You don't have sufficient rights to perform this operation.

  Any suggestions would be greatly appreciated.

  THX,

  SB

  Hello

  I am happy to know that the problem is solved. Do not hesitate to contact us, in the case where you face other problems in the future.

• Sfc/scannow error: Windows Resource Protection could not perform requested operation

  Hello

  I'm having a problem. All of my windows files are corrupted. When I changed the theme, it's always the basic theme of load. I don't know why. Maybe it's because I never have it patched with Universal Theme Patcher. I know that this will change the windows file, and windows he refused. I'm sorry windows.
  So I want to make a repair. I ran everything. When I ran the system restore, it is said that the antivirus blocked the system restore. I have search on this site, but there is no help. I take the Startup Repair, nothing changes. So my last hope is run cmd and type sfc/scannow.
  And then cmd stop the scan and says Windows Resource Protection could not perform requested operation. I'm looking for help on this site, I have nothing. I did not help
  Please help me. I don't want to reinstall my Windows. Any ideas are welcome. But when no one can help me, what should do?

  Hello

  Method 1:

  a. Click Start, type services.msc in the start search bar and press ENTER.
  b. Locate the Volume Shadow Copy service.
  c. click cliché instant volume, then select restart.
  d. now make a right-click Volume shadow copy, and then select Properties.
  e., under Startup type, select automatic.

   

  Method 2:

  Check your hard drive for errors.

  Follow the below mentioned article:
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.