Performance and benchmarking tools for short

Similar Questions

• When I go to "Selection tool" and "Type tool" for example. I can't go back in the selection tool again. It is locked.

  When I go to "Selection tool" and "Type tool" for example. I can't go back in the selection tool again. It is locked.

  I did a fresh install, and the programme of work of the normally.

• Performance and VMware tools

  Is it possible for out-of-date vmware tools influence the performance of the operating system?  If so, how?  I'd be curious to get some opinions.  (Note: in this case, overcommittment memory is not in place)

  I wonder what performance issues if everything would be affected by out-of-date VMware tools (assuming that hardware virtual machine is the latest version) - things like processing, memory, network performance - or if the tools being obsolete are somewhat irrelevant for those who emits

  Thank you

  Welcome to the Satanikut forums.   In order to start a new topic, you can browse the forum that best represents your question and use her start an action of discussion.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• the iPhone screen is not responding and only works for short periods of time when I use siri for an indefinite period.

  Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...

  Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch.  It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature.  It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize.  You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.

• Information on the performance and tools: Visual effects adjust - adjust for a performance/appearance: influence on the photos and video?

  When I enter: Information on the performance and tools: Visual effects adjust - adjust for a performance/appearance, it affects pictures and video? What is the display of the video?

  I really like what I see with better appearance. But my laptop is slow a little, and I get this Green spinning circle and programs not opening.

  But since I intend to make some photos and video editing in the computer and watch a few videos, I wondered if the work will be compromised.

  I have a few tutorials to speed up my laptop, but can someone also suggest to speed up my laptop here? I'm always willing to learn some things.

  Hello

  You can optimize the performance of different options in the information on the performance and the tool window. This will not affect the performance of the images and videos. Adjust for best appearance to set the computer to enhance the appearance, it allows many features aero that improves the display quality of the computer.

  To optimize the performance of the computer follow the steps provided in the link below and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• Tools for follow-up and backup/restore for databases of TT

  Hello
  
  I'm new to TimesTen. I need to set up an automatic tracking of databases of TT. There all the tools available? Also would like to know if he has all the tools for tracking backups for these data stores.
  
  All standards and best practices to manage the available TimesTen environment?
  
  Appreciate any help/advice.
  
  Concerning

  There not really tools for automated tracking backups of data store. TimesTen data store must only be saved using the provided tool ttBackup or the utility equivalent API function. backup files by any means datatsore will result in an inconsistent backup that very probably cannot be successfully restored. The output produced by the ttBackup command files can themselves be saved to help and the usual ways. TimesTen supports full and incremental backups and any given data store can have up to 8 incremental backup simultaneously active separate sets for her. Some information about these backup sets can be obtained in ttLogHolds procedure (this will show the hold position paper corresponding to each active incremental backup set) using the. In addition, the procedure of builtin ttBackupStatus provides information on the last performed backup. See the documentation for more details on these procedures.

  Regarding the monitoring of TimesTen, this is usually done via scripts or a custom application (C, C++, or Java). The scripts are generally not recommended because they will have to constantly connect and disconnect the data store and which is an expensive operation that can degrade the performance of the system if done too often. The recommended approach is to write a program of personalized follow-up that remains connected to the data store and executes the tasks of different monitoring according to the needs. A simple example of such a program is the C++ ttMonitor demo program in the directory of your install TimesTen ttclasses demo.

  There are 3 main areas that must be inspected systematically:

  1 basic data
  2. the replication
  3 cache connect

  Of course, if you are not using replication, then you don't need to exercise supervision. Same thing for the Cache to connect.

  As to what should be monitored, it is quite a large area and probably too much to post here. If you provide your email address, I can send you a book white PDF iscusses this in detail.

  Chris

• What is the best software to improve performance and free hard disk cleanup. I used MacKeeper, but I'm tired of paying annual fees for this service.

  What is the best software to improve performance and free hard drive cleanup? I used MacKeeper, but I'm tired of paying annual fees for this service.

  You shouldn't have these software.  See discussion of Klaus1

  Do not install MacKeeper

  See also this one by Klaus1

  Viruses, Trojans, Malware - and other aspects of Internet Security

• Satellite L350 - 172 (PSLD8E) - drivers and tools for Windows 7

  Hi all

  After 3 years using this laptop with Windows XP, I decided to install Windows 7 Professional 32 bit. It was very easy and because of 3 GB of RAM it works fast (faster than XP).

  Download area of Toshiba in the web offer of many drivers and utlities for Windows 7 and this laptop but what did this sowftware is not mentioned:
  Storage Manager?
  TEMPRO?
  Tiles for Mobility Center?
  Value Added Package?
  PlayReady PC Runtime?
  ReelTime?
  ServiceStation?

  Does anyone have a description or an idea?

  Hey Buddy,

  The description for each driver or tool on the Toshiba driver download page. So the first serach for your model of laptop here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite L Series > Satellite L350 > PSLD8E > Windows 7 32 bit

  You can see a list with all the drivers and tools. If you want to see the description on the right side of the table, you can see more information. Then click the arrow to the right and the description for this download page will be loaded.

  Check this box!

• took a diagnostic tool for this site and it says cd/dvd cannot be read / burn

  Toshiba c660/c660d.i tried to burn a disc for the first time in fourteen months, burner is not not detected.cant read disc.windows empty just continues to put some cant read messge up.when I do a burn list and click on burn I wonder burner, choose a white premiere.1 ran a diagnostic tool for the site and it said unable to read dvd/cd burnt.the this burner in my computer.i can read music on the cd and a ran.just of film does not burn.

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. What is the full and exact error message?

  I suggest to see the link and try to run the fix it:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, please provide more information to help you best.

• Windows Update for Vista family 32-bit premium does not update all. 57th error and sku011.cab for office 2003. Malicious tool not updated. Stays on the list was updated even after having managed States.

  Office 2003 sp3 do not install in windows update. It is a 108.2 MB file, no kb #. Under 2 other 2003 office updates. KB977713 for office outlook and for office 2003 update kb907417. 57F error message comes out after having failed in windows update. Sku011.cab missing error comes just after process fails at the end of the attempt to update for the updated 2003 3 office. Tool kb890830 in windows update to install malicious but indicates successful when finished. Returns to windows update to install. All other above mentioned updates show missed.

  Thanks for your time,

  Vincent Ciaramella

  The malicious software removal tool does not use an installer. As a general rule, when you run the malicious software removal tool, it creates a temporary directory named at random on the root of the drive of the computer. This directory contains several files, and it includes the Mrtstub.exe file. Most of the time, this folder is automatically deleted after the tool to the end of execution or the next time that you start the computer. However, this folder may not always be automatically deleted. In these cases, you can manually delete this file, and this has no adverse effect on the computer.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  With regard to the Office updates:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670 seems to be an update very old "update for Office 2003 (KB907417)"

  With regard to the http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=da24d44b-4d6e-4bcd-b7cd-ca56bf6c0ba7
  Update for the junk e-mail in Outlook 2003 (KB977713) filter

  Have you tried manually download KB977713 and install the same.

  Sometimes, however, it still doesn't work: full-file version update may request Office source files
  http://support.Microsoft.com/kb/840169

  TaurArian [MVP] 2005-2010 - Update Services

• All the tools to analyze and correct register for XP?

  Someone has suggestions on all the tools to analyze and correct register for XP?

  Thanks in advance for your suggestions

  There is a way if you have the xp installation cd. Try kb307545

  Although she said "Corruption of the registry" that prevents the boot, xp he

  will fix it... Need to boot from the xp cd, press r to the menu, simply enter recovery console.

  Select 1 for C: press button for password

• Microsoft tools for restore the disk framentation system, and several others are missing. Is there a way to recover/reload?

  My computer crashed so I had to use my recovery disks that are about 8-10 years. When I reinstalled Windows service pack 2, the system recovery tools and several other microsoft tools not have installed on my system. Is it possible to recover these tools? The command prompt tells me that they are not on my system and get help from the Server Manager in the service (Net HelpMSG 2185) option. Can you tell me what that means and if/how I can do this?  I can't find a tab from the system restore on my computer. I guess that's because I have more access to these tools. My messages when I try to update things like Windows Media Player tells me that I can't set a date of restoration and that if I lose my installed programs that they can not be recovered. Guess that means I have to use my recovery again disks?

  <(Microsoft tools="" for="" the="" system="" restore,="" disk="" framentation,="" and="" several="" others="" are="" missing.="" is="" there="" a="" way="" to="" retreive/reload="" these="" tools?="" (assessories,="" system="" tools)="">

  Hey, take a look at the article and try the steps

  http://www.softwaretipsandtricks.com/Forum/Windows-XP/17333-System-Restore-tab-missing-XP-Pro.html

  See you soon!

• Hard disk and transfer of external tools for my dimension 2100 that are reliable?

  Hard disk and transfer of external tools for my dimension 2100 that are reliable?

  Hi chucksmack,
   
  -What exactly is the problem you are having?
   

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time to ensure that you have included all the information required and we will try to help. »

  See this link for more information on:

  How to ask a question

• do I need Windows PowerShell integrated scripting tool for home computer and access to the internet, powershell

  do I need Windows PowerShell integrated scripting tool for computer and internet access

  No you didn't he need for home computer and internet access