Peripheral USB is not detecting in ESX4.1 Std

Similar Questions

• my USB is not detected in my pc, but it is detected other pc and laptop. and if I restart my computer at that moment there, it is detected.

  I have lenovo ideapad laptop z580. i5, family basic Windows 7. in the week, I have a problem as "my USB is not detected in my pc, but it is detected other pc and laptop. and if I restart my computer at that moment there, it is detected. "so please give me the solution. Thank you. my email is * address email is removed from the privacy *. Thank you.

  Hello Badodariya Malay,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with pen drive not getting not detected.

  I need to ask you some questions to help you better.

  1. don't you get error message when the USB not detected?

  2. What is the brand and model of the USB?

  Perform the steps in the link and check.

  Tips for solving problems of USB devices 

  Answer to us if you are having problems with the USB key or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Acquisition of data USB-6008 not detected in LabVIEW

  Hello

  So my USB-6008 DAQ hardware is not available when I do a new task DAQmx (or open the DAQ assistant).

  I found this link: http://digital.ni.com/public.nsf/allkb/179BC9B0266168288625722100738C22
  I did everything just said but LV still does not detect my USB-6008.

  As you can see on the image below it is detected by the solution of measurement and Automation Explorer. I don't know how to test with visa test Panel.

  

  After that, I tried to test with the diagnostic utility, and here it does not appear in the list.

  I downloaded the appropriate (several times) drivers but still nothing.

  Can someone help me with this?

  
  

• USB mouse not detected at startup.

  Hello

  My new HP USB mouse is not detected when I start my PC. I have to unplug & plug to make it work every time. My USB ports are fine and my previous USB mouse still works fine. I deleted installation driver from the Device Manager, but no utility.

  I have Windows XP.

  No idea how to solve this problem?

  Shaan-

  HiShaan,

  I suggest you contact the manufacturer of the computer and check if USB devices is enabled in the BIOS and enable it and check if the USB mouse is detected when you start the computer.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  You can also check if the Interface device access human service is set to automatic and started. You can change it accordingly and check if it helps. To do this follow the steps below:

  1. Click Start and click Run.
  2. In the Run dialog box, type services.msc and click Ok.
  3. In the services window, scroll down to Human Interface device.
  4. ClickHuman double Interface of device service and click the general tab.
  5. Change the startup to automatic type, then click on apply.
  6. Click Start, and then click OK.

  Restart the computer and check if the USB mouse works fine when the windows start.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Peripheral USB is not recognized (external hard drive)

  I have a western digital external drive who worked originally on windows XP Edition family, unfortunately this computer crashed and had to reinstall everything. After ending, I went to retrieve some data off the drive and it keeps giving error usb device not recognized. I looked on a lot of different 'solutions' to nothing does not. I can connect to other computers running the same operating system and he shoots very well if it is not the drive. It seems as if a driver is missing, but I checked with Western Digital, and they say the questions is a mistake of operating system, all updates and service packs have been installed. Ive tried all online of the easy solution like just unplug the computer and the drive and restart, remove and reinstall the drivers in the OS System. In Device Manager its reports as an unknown device under the USB bus controllers section. I need to get this to work by car no matter either if it needs to be reformatted or repartitioned, but I can't even pull up on the drive to reformat so don't know what to do. any suggestions are greatly appreciated.

  The problems detected as "unknown".

  http://support.Microsoft.com/kb/314464

  WD Firmware Updater. (May be necessary since you have reinstalled the OS)

  http://www.wdc.com/wdproducts/wdsmartwareupdate/?ID=wdfMyPassport&OS=win&FW=1

• USB 2 not detected mass storage devices

  Windows XP SP3 USB - 2 ports do not detect mass storage devices (reported as unknown device).  Same device is detected and works OK on the USB-1 ports.  Function USB - 2 ports for printers and mass storage OK no (no brightness, without removable hard disks).  Have tried all the simple fixes found on support.microsoft.com.  No success yet.

  Hi Lostcauseracing,
   
  Follow the steps in these articles and check if it helps in fixing the issue:
   
  How to troubleshoot unknown devices listed in Device Manager in Windows XP
   
  Advanced troubleshooting tips for General USB for Windows XP problems

• USB port not detected

  Model: HP pavilion 2231tx g6

  Operating system: Windows 7

  My laptop model is indicated above. In my address to the left USB ports side 2 does not properly. During usb connection, it has not detected. Please give me a solution.

  Thank you

  have you installed USB 3.0 drivers, otherwise use this link to download

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

• USB connection not detected for Samsung Fascinate

  I have a smart phone Samsung Fascinate 1500.  When I connect it by USB to my computer, the computer no longer detects it as a media device or mass storage mode (although it worked fine the first few times).  The phone also does not detect the connection and simply seeks to charge the battery.  I downloaded the latest drivers and tried allowing pop ups without success.  Any ideas?  I cannot download my music, and it's a lot of time to transfer photos by other means..., including that I had to buy a SD card adapter.

  The USB port works with other devices.  I don't think that the USB cord to my phone is the problem, as others have shared this problem in other forums.  Does anyone have a solution?

  Hi Lin,

  1. have you tried to connect the phone to another computer?

  2. have you made any recent changes of hardware software on the computer?

  Test the device on another computer. Additionally, make sure that the software provided with the Samsung phone is updated.

  Please visit these links for more information:

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  Problems with USB devices:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this information helps!

• external usb hub not detected in vista sp2-hub external power supply a

  I can plug my external hard drive directly into my laptop and it is detected instantly.  If I use the external hub, the drive is not detected.  all the drivers are updated, no conflict of resources in "not advanced" deactivation of controller caused improved host machine to freeze and had to do a restore.  There are many applications of this kind.  Please note that the procedures on Hub controllers to uninstall gave results little according to the correspondence of blog.  No matter what other tactics very appreciated.  will try to uninstall, but skeptical.  Intelligence is in the hub of USB 2.0 on the laptop, as evidenced by its ability to detect.  He can not just extend to the external usb hub.  Please advise, it defies logic.

  Hello

  The player and the hub are not compatible I've seen. Maybe try a different HUB.
  (Is the HUB you use powered, otherwise this could also be a possible cause of wiring).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• USB device not detected.

  Original title: USB device

  I can't get Windows 8 to detect my USB video to DVD connector. I installed the necessary drivers but nothing seems to work.

  Thank you for your answer

  Apparently, the USB connector is damaged or has simply not. I took it to a computer store, their computer could not detect the connector either. I think I'll buy another connector $ 49 after only 3 years.

  Thank you

• Peripheral USB do not work correctly on the Satellite M40 313

  I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.

  However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
  These two devices do not work with my computer.

  Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
  I fetch the requested file, but it made no difference...

  It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.

  In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.

  Any suggestion is appreciated.

  Hello

  Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
  1.), updated the Bios
  2.) recover the system with the recovery cd (backup your data first!  ;))
  3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)

  If you have no success after completing these steps, and then give a few comments.

  Welcome them

• Old hard drive PS3 by USB box not detected by Windows Vista

  Hello

  I recently updated my old HD PS3 40 GB with a 500 GB one. Since then, I bought an external HD for my old HD, in the hope that I could use it as a hard drive for some files I have. However, I encountered a big problem - Windows Vista does not detect the HD.

  So far I read a lot of posts on the internet with people having similar problems, but with no definitive answer, so I hoped to get :)

  So far, I've tested the speaker on both the different 40 GB and new 500 GB PS3 in HD, as well as 2-3 computers. Nor are detected by windows... both have the power (green light is on, and I can hear the disc rotation), but are not detected on the management of the devices or programs in 3rd (SwissKnife). As far as the computer is concerned, nothing is connected.

  Thinking that it was probably a hardware problem, I whipped my laptop HD out and connected on a separate computer and it worked without me even having to he invites. This leads me to believe that the device works perfectly and its something about the PS3 HD, who doesn't like Windows.

  The only thing I have not tried is put my old hard drive to the PS3 in the PS3 and reformatting. The only reason for this is a screw on the case of the PS3 has decided, that he's not budging despite all my efforts. Its now 12:45 and I'm too tired to fight with 1 screw more! :) I really don't know not how tabling in so well, 3 others went fine and I deliberately don't screw them in tight with the new HD after I read about the problems people have had by removing the screws.

  Someone at - it suggestions at all? How to get Windows to recognize that this has something plugged in, on how to remove that last screw embarrassing! Whatever that either would be appreciated!

  Thanks in advance

  Hello
   
  Check if the drive works very well with the game station.
  Chipset driver update and see if that makes a difference.
   
  Check if the HARD drive is detected in the Device Manager or disk management tool.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of issues, expand disk drives and check the sub for its detection.
  1. Click Start, type diskmgmt.msc and press to enter.
  2. check if the HARD drive is detected.
   
  If the HARD drive is not detected, try the next step.
  Step 1: Connect the HARD drive to the computer and find the hardware check if it detects. To do this, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of items, click drives.
  3. click on the Action menu, and then click check for material changes.
  4. follow the wizard to complete the task.
  5. If there is no progress, then click the Action menu and click Add legacy hardware to install the device.
   
  Post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• System does not boot up... message is... "" peripheral USB on the detected... current situation system turns off after 15 seconds.

  I recently bought a new golf gps device and connected to my desktop pc to register. After unplug his computer m USB cable I can't start my computer.

  whenever I start it the pc his usual routine, but then I saw the following message... USB device to the system detected. System turns off after 15 seconds.l

  Fifteen seconds after the system shuts down. It wiil also not afford to start or access the safe mode, the program installation or any other type of recovery mode, I could access normally. It will also not recognize my Win XP installation disc. I guess it's because of the configuration of the BIOS which accesses the hard drive before the CD rom drive.

  The problem was obviously created by the golf gps USB cable but I can't find a way to get the system to boot so I can find a way to eliminate the problem.

  Thanks for any help that anyone can provide. I am running WinXP Sp3

  Hi PAULARUNNELS,

  ·         What happens when you try to start in the Advanced startup options?

  ·         You receive the same error?

  ·         You external devices connected now?

  Try the following.

  Method 1: Disconnect external devices not essential, connected to the computer and restart the computer.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 3: If you are unable to start on one of the advanced startup options, and then you can follow this article.

  How do I recover from a corrupted registry that prevents Windows XP startup

• Satellite 5005-S504 - peripheral USB are not recognized

  Hello

  with my laptop older, one Satellite 5005-S504, I recently problems with the USB ports. None of the three ports detects a USB device. Device Manager does not indicate a problem on the host controller or root hub.

  I am running Windows XP, SP3 and there was no recent updates to be identified as the cause of this dysfunction.

  Suspicion over there?
  Is there a driver available that could help?

  Thanks in advance!

  TH

  Hello

  The USB ports are listed in the Device Manager or not?
  If so, I'll try to remove them and restart the laptop. After that the ports will automatically install again.

  If it doesn't work, you can try updating the chipset driver. Take a look on the Web from Toshiba site to download.

• Peripheral USB are not recognized

  Original title: USB drivers

  My mouse, printer and mobile device are not recognized or functioning when plugged into the USB ports. They seem to be fed, but that's all. When I run MASTS (Microsoft Automated Troubleshooting Service), it scans and concludes that "material changes may not have been detected. He said he applied a fix but still nothing works.

  Try to reinstall the chipset drivers of your PC manufacturer or the manufacturer of the motherboard, if a generic PC