Peripheral USB on my M30X-118 do not work

Similar Questions

• Peripheral USB has malfunctioned. Windows does not recognize it.

  Peripheral USB has malfunctioned. Windows does not recognize it.

  Hello

  ·        What is the exact error that you receive when you try to connect USB?

  ·        Since when are you facing this problem?

  ·        Which device you are trying to connect via USB?

  ·        This problem occurs only with a USB device or USB devices?

  Method 1:

  You can try to plug the USB key into a different USB port and check if you face the same problem.

  Method 2:

  Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

  (a) click Start

  (b) the Device Manager type in the search bar and press ENTER

  (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

   

  Method 3:

  I also suggest to run the difficulty he provide in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 4:

  You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also check out the link below:

  http://support.Microsoft.com/kb/555375

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• my support of modem usb, USB 1.1, but it does not work on windows 7 to the motherboard desktop h61

  my support of modem usb, USB 1.1, but it does not work on windows 7 to the card mother h61 with duel core 2nd computer office prossesor genration

  If your USB modem is provided by your ISP, check for an Ethernet RJ45 port. If the modem doesn't, connect a RJ45 connection between the modem and the computer cable and UNPLUG the USB cable. Your computer should now connect to the Internet without any problem...

• M30x-118 DVD not read and write all formats

  Having problem with m30x-118 (Mat * a uj-820 s). It is not reading the cd - r/rw and DVD + r/rw but read commercial perfectly all cd/dvd - like video dvd or toshiba installation cd.
  While trying to open the disc - "d:\ is not accessible incorrect function" appears.
  Nero recognizes empty disk inserted, but having power calibration error.

  Ramasst running, driver dvd reinstall does not help.

  Hello

  The "power calibration error" message is a problem that occurs with the more recent writers as older. These means of error message that the CD/DVD writer cannot write in the blank CD/DVD because it can t match the output power of the laser power to write CD/DVD.

  Please check this page useful:
  http://www.electricattic.NET/en/mediumspeederror.htm
  http://www.dvdplusvideo.com/dvdguide001.html

  You will find an advice and information why these problems occur.

• USB connection for speakers/conrtols do not work?

  Hello.

  My daughter has a bed that connects to an MP3 player via a USB connection and speakers and play controls on it. SanDisk Sansa clip plus is not working, looks like he's trying to connect to a computer to receive information. Is there something I should do differrently or if this feature is not supported with this MP3 player?

  A bed that connects to an Mp3 player? Cool!.  The Clip + has two modes, the MTP and MSC mode (settings > system settings > USB). If you transfer files under the PSG, the songs will not appear on the computer when you connect in MSC mode and vice versa. Most likely your bed does not recognize MTP peripheral devices. That being said, try transferring music on both msc and mtp and do a test. Try to connect the Sansa to your bed under MSC and MTP.

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• External USB 3.0 HARD drive does not work on USB 3.0 port

  Hello guys,.

  I have a problem with my external HARD drive and the problem is that it is USB 3.0 feature does not work in my computer.

  The curious thing is that it works very well in the SATA port or a normal USB 2.0 port.

  Y at - it a failure with the HARD drive or is there something wrong with my motherboard (M5A99 fx pro r2.0)?

  Thanks in advance.

  From my point of view of the few is not HARD drive problem because the HARD drive operates in a USB 2.0 port.

  I m wondering if you tried to update the USB 3.0 driver.
  Have you tried this HARD disk in another computer / USB 3.0 ports?
  I think that its worth a check.

  Also, I read on some problems of USB 3.0 controller from different manufacturers.
  Sometimes, it might be possible that some problems of compatibility between different devices may arise.

• Satellite L500-1WP: after Win8.1 upgrade USB 3.0 drive external does not work

  Satellite L500-1WP

  After updating Windows 8 to 8.1 my drive USB 3.0 external do not work.
  Windows message: "device not recognized".

  Hello

  I guess you are talking about an external HDD that supports USB 3.0 standard.
  Right?

  Have you tried to connect to another USB port external HARD drive?
  The USB ports work correctly in relation to other USB devices?

  The USB 3.0 device supports Win 8.1?

  You should check this.

• M40X-129: the two usb ports on the right does not work

  Hello people.

  Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
  even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
  Maybe it's a hardware fault. someone else has the same problem?

  Thanks, jens

  today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
  I'll ge see my local dealer Monday ;)

• Mac Pro 3.1 dual port USB 3 pci-e card does not work on 10.8

  I have an inateck Dual Port USB 3.0 PCI-E card (KTU3FR - 2 p) which worked well when my Mac Pro 3.1 operated in the OS10.6.8, but after upgrade to OS 10.8.5, the map is no longer operational.   It can be seen as a device, but the description of the material says that he doesn't have a driver.  Inateck said it's Apple area, and "because of the new strategy of the Apple driver there is also no external support pilot in this case.  Can I do other than throw the card?

  THX

  Rob

  If inateck doesn't have drivers for OSX 10.8, and 3 Apple USB drivers do not work, then you are out of luck

• Pavilion 500-081ea: FRONT USB 3 PORTS don't DO NOT WORK.

  I recently had an ASROCK H61M-DG3/USB3 motherboard mounted in my not so old (18 months) HP Pavilion PC 500 - 081ea & even if original HP 3 USB ports are connected to my new motherboard that do not work.  All the USB in the BIOS settings are turned on & the right USB drivers are installed in "Device Manager" without conflicts I still can't use the two front 3 USB ports.

  Hi Jeff,

  The reference to a technician came from your other messages.  In any case, the cable USB 3 header, as previously mentioned will restrict the question.   I keep this cable in my toolbox for situations like yours when I change sets and motherboards.

• Ports USB of W520 left side do not work.

  Hi everyone, I'm running a problem. I am using usb ports located on the left side, but they do not work. I plug my mouse to one of the USB ports and when I start my computer, I can see the mouse works because it turns on, but then once the windows screen it shuts down and I can't use it. Someone at - it indexes? I tried to connect it to a USB flash drive, just in case it was just the mouse and it does not work either.

  I went into Device Manager and looked at the USB, but there were few of them. I uninstalled and reinstalled the following: usb generic, generic usb host USB 3.0 of renesas. There was a message that says: "bluetooth device not found."

  I checked the BIOS and everything is enabled.

  NEVEMIND. workaround. "" I looked under the "other devices" option and I saw that there was an unknown device which has not installed correctly. I went under 'Properties', then went to the tab "driver". I got the update and he gave me a warning about an unknown device installation, but I went to come some way and everything works now.

  Incase anyone has the same problem, here is how things should look like once the left side usb working and installed.

  http://I60.Tinypic.com/w0i7o7.PNG