Permanently errors

After that I downloaded the latest version of pixelbender (1.5.1) and started working on one of my filters, everything seemed fine for a minute or two until I started having error messages every few seconds:

Image processing error.

Then it started to happen whenever I changed a setting. Then it happened three times in a row every time that I changed a setting. It was boring, so I closed and opened again. It's the same thing. I got a minute no problem, then she quickly progressed to the impossible to use. I thought that maybe it's just that a filter so I tried another filter of edition I got exactly the same thing happened.

What happens here? Let me know if you give me any extra info.

Thank you.

It seems that there is a problem with your video card. Can you try to move to the processor of treatment (in preferences) and see if the problem continues to be? Can you also post or send your configuration of the kernel and the machine on the forum?

Tags: Pixel Bender

Similar Questions

e-mail messages could not be delivered to the recipient and are a permanent error.

I am able to send most of my emails, but for a reason that some of my emails bounce. These are NOT personal e-mail addresses, but are business e-mail addresses ending in ".edu" and ".". CA.us. This is the message I get when the email bounces:

This message was created automatically by mail delivery software.

A message you sent could not be delivered to one or more of its
beneficiaries. This is a permanent error. The following address(es) failed:

I've always been able to send emails to these addresses in the past, and now this problem arose. What should I do?

Are you sure that the addresses are still valid? This message probably indicates that they are not. Is there additional information in the message? Boulder computer Maven
Most Microsoft Valuable Professional

ORA-12012: error on auto work 754461 ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, command parameters "RCPT TO:" ORA-06512 unrecognized or missing: at "SYS." UTL_SMTP", line 20 ORA-06512: at"SYS." UTL_SMTP.

Hello

I get below error frequently in the log database alerts.

ORA-12012: error on auto work 754461
ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, command parameters ' RCPT TO: ' unrecognized or missing
ORA-06512: at "SYS." UTL_SMTP", line 20
ORA-06512: at "SYS." UTL_SMTP", line 98
ORA-06512: at "SYS." UTL_SMTP", line 240
ORA-06512: at the 'APPS '. EIS_UTIL_PKG', line 94
ORA-06512: at the 'APPS '. HKD_PO_ADDON_PKG', line 110
ORA-06512: at line 1

The syntax error comes from the SMTP server, not to the job itself, so I disagree with your solution.

UTL. MAIL error ORA-29279: SMTP permanent error: 501 syntax of address error in
Hello

I'm new to the forum please excuse if I post not properly without standards.

We need to send mails using the UTL. MAIL package and installed them on the database.
Whenever I try to send an email, I get the following error:

ERROR on line 1:
ORA-29279: SMTP permanent error: 501 syntax of address error in
[email protected]
ORA-06512: at "SYS." UTL_MAIL", line 654
ORA-06512: at "SYS." UTL_MAIL", line 671
ORA-06512: at line 2

The test code that I am running is:

BEGIN
UTL_MAIL. Send (sender = > 'test < [email protected] >',)
recipients = > "[email protected]"
subject = > 'test UTL_MAIL subject. "
message = > "UTL_MAIL test body");
END;

I tried different combinations:

BEGIN
UTL_MAIL. Send (sender = > "test"< [email protected] >"")
recipients = > "[email protected]"
subject = > 'test UTL_MAIL subject. "
message = > "UTL_MAIL test body");
END;

even tried

BEGIN
UTL_MAIL. Send (sender = > '[email protected]',)
recipients = > "[email protected]"
subject = > 'test UTL_MAIL subject. "
message = > "UTL_MAIL test body");
END;

Whenever I get the same error.
It seems to work with a server exchange e-mail, but never on the SMTP server.

In the SMTP address of the sender server logs is not to have the <>of brackets unlike other emails that are sent to the course.
It seems that the SMTP server is quite strict and the SMTP administrator will change all the settings on the server.

The version of oracle is as follows

Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production

Could you please help me with a solution.
Some how the brackets are undressing (which usually UTL MAIL package), is it possible that I can include the brackets.

Published by: 984757 on January 29, 2013 02:56

Published by: 984757 on January 29, 2013 02:57
I don't like UTL_MAIL - UI abstraction clumsy and poor and not very well written.

Had a look at the code. It does this:
```
WHILE (ALL_RCPTS IS NOT NULL) LOOP
      UTL_SMTP.RCPT(MAIL_CONN,'<' || GET_ADDRESS(ALL_RCPTS) || '>');
END LOOP;
```
The process function GET_ADDRESS() ALL_RCPTS parameter, returns the address 1 of him and updates (in and out) parameter with the remaining string.
```
SQL> var address varchar2(200);
SQL> exec :address := ',[email protected]';

PL/SQL procedure successfully completed.

SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
[email protected] [email protected]

PL/SQL procedure successfully completed.

SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
[email protected] address=

PL/SQL procedure successfully completed.

SQL> 
```
The address is explicitly surrounded by square brackets in accordance with RFC. So what needs to see your SMTP server.

If this isn't the case-maybe then our UTL_MAIL versions do not match. I don't remember what version I pulled and unpacked UTL_MAIL package code I have.

Personally, I stopped using the UTL_MAIL earlier. Missing in may points. I wrote my own e-mail package that supports multiple attachments, formatting complex Mime, attachments of 20 + MB in size and so now - running on the UTL_SMTP interface (which provides for mail transport layer). And for the problems you are having, I suggest considering using UTL_SMTP directly.

Published by: Billy Verreynne on 29 January 2013 12:52
(Updated with names of entities HTML code for the code snippet to render correctly)

ORA-29279: Unbalanced SMTP permanent error ' > ' XE
Dear Sirs

Sorry for my bad English, I'm not from the United States; I have a problem when I send emails in Oracle Express Aplication 11.2.0.2.0, I get this error ora-29279: SMTP permanent error < [email protected]... Imbalances ' > ' and I don't know what is happening. I have configure UTL_MAIL in this way:

*********************************************************************************
[host@oracle]$ cd $ORACLE_HOME/rdbms/admin]
[host@oracle]$sqlplus / as sysdba]
SQL > @utlmail
SQL > @utlsmtp
SQL > @prvtmail.plb
SQL > GRANT EXECUTE ON utl_mail to PUBLIC;
SQL > GRANT EXECUTE ON utl_smtp to THE PUBLIC;
SQL > alter system set smtp_out_server = '192.168.170.10' scope = both;
ACL: Access control list

in Blog of white horses

Create ACLs and privileges

Now, first of all create an ACL as SYS (or any other user with DBMS_NETWORK_ACL_ADMIN run granted), this will hold the privileges. You can add as many privileges that you like to this file, but I recommend that you divide the privileges in the ACL for specific tasks or users. You create an ACL at least privilege, let thus begins with the 'connect' for ASSA user privilege, (also a role can be added as a main):

Start
(DBMS_NETWORK_ACL_ADMIN). CREATE_ACL
ACL = > "utl_mail.xml"
Description = > 'send mail allow to be. "
main = > "ASSA"
IS_GRANT = > TRUE,
privilege = > 'connect '.
);
commit;
end;
Add the privilege

Great, now that the ACL is created, you can add more privileges as the privilege of "solve":

Start
(DBMS_NETWORK_ACL_ADMIN). ADD_PRIVILEGE
ACL = > "utl_mail.xml"
main = > "ASSA"
IS_GRANT = > TRUE,
privilege = > 'solve '.
);
commit;
end;
Assign ACLs

Cool, you ASSA to connect and to solve, but you have not set the resources to which it is allowed to connect:

Start
(DBMS_NETWORK_ACL_ADMIN). ASSIGN_ACL
ACL = > "utl_mail.xml"
"Home = > ' 192.160.170.10 '.
);
commit;
end;

***********************************************************************************

I have configured utl_mail in another computer at the first time, in the virtual machine on a windows Server 2000 Server and works without a problem.
The problem is in the computer, with windows xp. I can't send emails despite UTL_MAIL configuration.

Danny Lima
Ecuador
Hello

I don't think that the code is bad, I have the same code in my virtual PC server with Windows server 2003 and machine work.

I don't think that either. My guess is that the values do not correspond. Sure you have exactly the same data on your XP system compared to the 2003 Server?
I see filtering with your code, it's email column in the employees table in most cases. "It could be of e-mail addresses stored there is not valid in the sense of containing an opening."<' without="" closing="" it="" at="" the="" end="" of="" the="">

-Udo

ORA-29279: SMTP permanent error: 530 5.7.0 must issue a STARTTLS command fi
Hello friend

I changed my smtp server to send email, but now I get a different as error below

ORA-29279: SMTP permanent error: 530 5.7.0 must issue a STARTTLS command first. 2sm141783tif.39

I don't know what is the STARTTLS command.

Pls help me.

Thank you
Uttam SIngh
Uttam,

Obviously the STARTTLS is a SMTP command.
This is a forum on ORACLE.
Of course, you can google STARTTLS!
Could you PLEASE, PLEASE, PLEASE be a little more industrious and stop cluttering up this forum with irrelevant questions?

THANKING YOU IN ADVANCE
-----
Sybrand Bakker
Senior Oracle DBA

ORA-29279: SMTP permanent error: 535 authorization failed (#5.7.0)
Hello

Can someone help me to find the number in the given pakg.
I'm tring to send e-mails through this package, but I make a few mistakes: -.

create or replace package body mail_pkg
as
function address_email (p_string in varchar2,
p_recipients table) return varchar2
is
long l_recipients;
Start
because me in 1... p_recipients. Count
loop
UTL_SMTP. RCPT (g_mail_conn, p_recipients (i));
If (l_recipients is null)
then
l_recipients: = p_string | p_recipients (i);
on the other
l_recipients: = l_recipients | ', ' || p_recipients (i);
end if;
end loop;
Return l_recipients;
end;

procedure writeData (p_text in varchar2)
as
Start
If (p_text is not null)
then
UTL_SMTP.write_data (g_mail_conn, p_text | g_crlf);
end if;
end;

procedure to send (p_sender_email in varchar2,
P_FROM in varchar2,
p_to in the table by default array(),
p_cc in the table by default array(),
p_bcc in the table by default array(),
p_subject in varchar2,
p_body long)
is
long l_to_list;
long l_cc_list;
long l_bcc_list;
l_date VARCHAR2 (255) default TO_CHAR (SYSDATE, 'dd my hh24:mi:ss yy') | ' + 8:00 (GMT + 08:00) ";

Start
SELECT PARAM_VALUE IN g_mailhost OF IHR_PARAM_DATA
WHERE PARAM_CODE = 'MAIL_HOST' AND
((CATÉGORIE = S ')) AND
(((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = trunc (sysdate))) AND
SEQUENCE = (SELECT MIN (SEQUENCE) IHR_PARAM_DATA
WHERE PARAM_CODE = 'MAIL_HOST' AND
((CATÉGORIE = S ')) AND
(((FROM_DATE EST NULL) AND (TO_DATE IS NOTHING)) OR)
((FROM_DATE EST NULL) AND (TO_DATE > = trunc (sysdate))) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE IS NULL)) OR
((FROM_DATE < = trunc (sysdate)) AND (TO_DATE > = TRUNC (SYSDATE))) );

g_mail_conn: = utl_smtp.open_connection (g_mailhost, 25);
UTL_SMTP. HELO (g_mail_conn, g_mailhost);
UTL_SMTP.command (g_mail_conn, 'auth login');
UTL_SMTP.command (g_mail_conn,
mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw ('mailuser')));
UTL_SMTP.command (g_mail_conn,
mail_pkg.f_base64_encode_raw (utl_raw.cast_to_raw('***')));
UTL_SMTP.mail (g_mail_conn, p_sender_email);
l_to_list: = address_email ("to:", p_to);
l_cc_list: = address_email ("Cc:", p_cc);
l_bcc_list: = address_email ("Bcc:", p_bcc);
UTL_SMTP.open_data (g_mail_conn);

writeData (' Date: ' | l_date);
writeData (' to: ' | nvl (p_from, p_sender_email));
writeData (' subject: ' | nvl (p_subject, '(aucun sujet) "));

writeData (l_to_list);
writeData (l_cc_list);

UTL_SMTP.write_data (g_mail_conn, "| g_crlf);
UTL_SMTP.write_data (g_mail_conn, p_body);
UTL_SMTP.close_data (g_mail_conn);
UTL_SMTP. Quit (g_mail_conn);
end;
end;

I get the below error when tring to run the procedure, even if my e-mail and password are correct.

ERROR on line 1:
ORA-29279: SMTP permanent error: 535 authorization failed (#5.7.0)
ORA-06512: at "SYS." UTL_SMTP", line 21
ORA-06512: at "SYS." UTL_SMTP", line 99
ORA-06512: at "SYS." UTL_SMTP", line 159
ORA-06512: at "SYSTEM. SEND_MAIL', line 12
ORA-06512: at line 1

pls help;

Thank you
Uttam Singh

Published by: Uttam Singh on December 26, 2008 19:56
Uttam,

This error is due to wrong settings of the SMTP server. Oracle, very probably has nothing to do with it. If I remember correctly, you are using Gmail for her. I guess there is a problem with it. Try with some other parameters of the field. I'll try to use the same with my own domain name. In the meantime, enjoy these two link.
http://www.williamrobertson.NET/code/utilities.pkg.txt
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2118740358226 #9206460145191
HTH
Aman...

Apparent permanent errors on hard drive - system = E9200Z

Continualy receive permanent hard drive SCSI HDT721064SLA360 Hatachhi drive error. 21 errors all the time, prevents diagnostics and maintenance to run employment right end. Diagnostic-error code HD535-2W =. frimware = STDO what to do to fix or mark areas so utility will deviate and NO job will end when trying to access these 21 areas that are in error. Have had these errors during the duration of the system (so far).

army03dad10usa,

What has happened is that the drive has failed. You need to replace as soon as POSSIBLE. There's no other choice.

The drive you mentioned is a 640GO Sata300, commonly referred to as a 640GO 7200 rpm SATA 3 G (3.0 Gb/s): http://support.hp.com/us-en/document/c01911649 (PS > also by the parts list).

I hope you did DVD + R set point recovery. If this is not the case, try to get them now. http://support.HP.com/us-en/document/c01867124

How to replace the hard drive:http://support.hp.com/us-en/document/c01761263

Upgrade and repair: http://h10032.www1.hp.com/ctg/Manual/c01859463.pdf

How to reinstall the operating system on a disk new hard, "Recovery from recovery discs": http://support.hp.com/us-en/document/c01867418

Adapter VANTEC to help copy the data from the old disk:http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002

Now the situation.

(1) you have to buy a 640 GB HDD or more. Small will not work. (Potential error).

(2) little choice on Sata300. But the most recent Sata600 will work fine.

http://www.Newegg.com/product/product.aspx?item=N82E16822148702 32 MB cache

http://www.Newegg.com/product/product.aspx?item=N82E16822148702 cache 64 MB

Permanent Error #2044: Unmanaged by ioError:. Text = Error #2032: error flow. URL:

Flash CS5.5, has worked before, but now to be permanently: #2044 Error: unhandled ioError:. Text = Error #2032: error flow. URL inside the Flash IDE, have no problem published in HTML with F12. the content is displayed, of course, works fine on the server
The code is very simple:
var loader: URLLoader = new URLLoader();
loader.addEventListener (Event.COMPLETE, loadXML);
Loader.Load (new URLRequest (sameResultsonAnyAddress))

It is not cross-domain problem
He is not spelling problem
Something wrong in Flash Pro IDE during test and debug,
I have disabled my McAfee firewall, did not help.
Really confused, can not guess what could be the problem.

Hi John,.

I tried with your action script code and it works perfectly on my system. I have the entire xml trace in the output window.

However, if I tried this on a system with no internet connection IE the link - http://forecast.weather.gov/MapClick.php?FcstType=dwml&lat=42&lon=-85& unit = 1, itself does not work, I get the same output you get.

Error opening URL 'http://forecast.weather.gov/MapClick.php?FcstType=dwml&lat=42&lon=-85& unit = 1'

Error #2044: Unmanaged by ioError:. Text = Error #2032: error flow. Unit URL: http://forecast.weather.gov/MapClick.php?FcstType=dwml&lat=42&lon=-85& = 1

at Untitled_fla::MainTimeline/frame1()

Let me know if it helps.

Thank you and best regards,

Roger Simon

Adobe Flash Professional Team.

Permanent error market Android in-app purchase.

Hello
We have an application multi-question on android market with in-app purchases
After purchasing, we get an error message (see photo) Permanent
What done us wrong?

good answer:

Re: Could not verify purchase

ORA-29279: SMTP permanent error: 503 bad sequence of commands

Hi gurus
Please help solve this problem, everything was going well, but these last two days I ' m receive this error message during the execution of this
exec send_email (' [email protected]', ' jhon.gmail.com ', NULL, NULL,' First msg ', 'First msg', 'First msg');
send_email code is like
CREATE OR REPLACE PROCEDURE IMAGE.send_email)
p_to IN VARCHAR2,
P_FROM IN VARCHAR2,
p_cc IN VARCHAR2,
p_bcc IN VARCHAR2,
p_subject IN VARCHAR2,
p_text IN LONG DEFAULT NULL,
p_html IN LONG DEFAULT NULL)
IS
p_smtp_hostname VARCHAR2 (225): = "smtp.abc.com";
p_smtp_portnum VARCHAR2 (5): = '25';
p_username VARCHAR2 (30): = ' [email protected] ';
p_password VARCHAR2 (20): = "B34adf";
l_boundary VARCHAR2 (255) DEFAULT 'a1b2c3d4e3f2g1 ';
l_connection UTL_SMTP.connection;
l_body_html CLOB: = EMPTY_CLOB; -Ce LOB will be the electronic mail message
l_offset NUMBER;
l_ammount NUMBER;
l_temp LONG DEFAULT NULL;
LONG l_to_recipients;
BEGIN
l_connection: = UTL_SMTP.open_connection (p_smtp_hostname, p_smtp_portnum);
UTL_SMTP. HELO (l_connection, p_smtp_hostname);
-AUTHENTICATION OF BEGIN-
UTL_SMTP.command (l_connection, "AUTH LOGIN");
UTL_SMTP.command (l_connection,
DEMO_BASE64. ENCODE (UTL_RAW.cast_to_raw (p_username)));
UTL_SMTP.command (l_connection,
DEMO_BASE64. ENCODE (UTL_RAW.cast_to_raw (p_password)));
-END AUTHENTICATION-
UTL_SMTP.mail (l_connection, ' < ' | p_from |) ') ;
-starts to multiple recipients
FOR x IN (SELECT REGEXP_SUBSTR (p_to, "[^,] +', 1, LEVEL") address OF DOUBLE CONNECTION BY REGEXP_SUBSTR (p_to,"[^,] +', 1, LEVEL) IS NOT NULL)
LOOP
UTL_SMTP. RCPT (l_connection, ' < ' | x.address |) ') ;
IF (l_to_recipients IS NULL)
THEN
l_to_recipients: = ' from: '. x.Address;
ON THE OTHER
l_to_recipients: = l_to_recipients | ', ' || x.Address;
END IF;
END LOOP;
-multiple at the ends of the recipients
IF p_cc IS NOT NULL
THEN
UTL_SMTP. RCPT (l_connection, ' < ' | p_cc |) ') ;
END IF;
IF p_bcc IS NOT NULL
THEN
UTL_SMTP. RCPT (l_connection, ' < ' | p_bcc |) ') ;
END IF;
l_temp: = l_temp | "MIME-Version: 1.0 ' |" CHR (13) | CHR (10);
l_temp: = l_temp | l_to_recipients | CHR (13) | CHR (10);
l_temp: = l_temp | "CC:". p_cc | CHR (13) | CHR (10);
l_temp: = l_temp | "Bcc:" | " p_bcc | CHR (13) | CHR (10);
l_temp: = l_temp | ' De : ' || P_FROM | CHR (13) | CHR (10);
l_temp: = l_temp | "Subject: ' |" p_subject | CHR (13) | CHR (10);
l_temp: = l_temp | ' Reply-To: '. P_FROM | CHR (13) | CHR (10);
l_temp: = l_temp | ' Content-Type: multipart/alternative; Boundary = "|" CHR (34) | l_boundary | CHR (34) | CHR (13) | CHR (10);
----------------------------------------------------
-Write headers
DBMS_LOB.CREATETEMPORARY (l_body_html, FALSE, 10);
DBMS_LOB. Write (l_body_html, LENGTH (l_temp), 1, l_temp);
----------------------------------------------------
-Write the text limit
l_offset: = DBMS_LOB.getlength (l_body_html) + 1;
l_temp: = '-'. l_boundary | CHR (13) | CHR (10);
l_temp: = l_temp | ' content-type: text/plain; charset = us-ascii' | CHR (13) | CHR (10) | CHR (13) | CHR (10);
DBMS_LOB. Write (l_body_html, (l_temp) LENGTH, l_offset, l_temp);
----------------------------------------------------
-Write the text of the email part
l_offset: = DBMS_LOB.getlength (l_body_html) + 1;
DBMS_LOB. Write (l_body_html, (p_text) LENGTH, l_offset, p_text);
----------------------------------------------------
-Write the limit HTML
l_temp: = CHR (13) | CHR (10) | CHR (13) | CHR (10) | '--' || l_boundary | CHR (13) | CHR (10);
l_temp: = l_temp | ' content-type: text/html; " || CHR (13) | CHR (10) | CHR (13) | CHR (10);
l_offset: = DBMS_LOB.getlength (l_body_html) + 1;
DBMS_LOB. Write (l_body_html, (l_temp) LENGTH, l_offset, l_temp);
----------------------------------------------------
-Write the HTML part of the message
l_offset: = DBMS_LOB.getlength (l_body_html) + 1;
DBMS_LOB. Write (l_body_html, (p_html) LENGTH, l_offset, p_html);
----------------------------------------------------
-Write the final limit html
l_temp: = CHR (13) | CHR (10) | '--' || l_boundary | '--' || CHR (13).
l_offset: = DBMS_LOB.getlength (l_body_html) + 1;
DBMS_LOB. Write (l_body_html, (l_temp) LENGTH, l_offset, l_temp);
----------------------------------------------------
-Send email in chunks of 1 900 bytes to UTL_SMTP
l_offset: = 1;
l_ammount: = 1900;
UTL_SMTP.open_data (l_connection);
While l_offset < DBMS_LOB.getlength (l_body_html)
LOOP
() UTL_SMTP.write_data
l_connection,
DBMS_LOB. SUBSTR (l_body_html, l_ammount, l_offset));
l_offset: = l_offset + l_ammount;
l_ammount: = the LEAST (1900, DBMS_LOB.getlength (l_body_html) - l_ammount);
END LOOP;
UTL_SMTP.close_data (l_connection);
UTL_SMTP. Quit (l_connection);
DBMS_LOB.freeTemporary (l_body_html);
END;

The likely cause is that your code of beneficiaries is not running (due to controls to null). Which means an incomplete sequence of orders.

In addition, it is false.

UTL_SMTP. HELO (l_connection, p_smtp_hostname);

Code sample Oracle in the manual is WRONG! It's really stupid to send the name of the SMTP server in the SMTP server's host/IP - as if we don't know who he is.

RFC 5321 is very very clear on this:

4.1.1.1 extended HELLO (EHLO) or HELLO (HELO)

These commands are used to identify the SMTP client to the SMTP Protocol

Server. The argument clause contains the complete domain name

of the SMTP client if one is available. In situations where the

SMTP client system doesn't have a significant domain name (for example, when)

its address is dynamically allocated and no reverse mapping record is

available), the client SHOULD send an address literal (see

Section 4.1.3).

You need to identify the SMTP client. Not to tell the server you are the mail server!

Permanent error of update on CS5 Creative suite on iMac El Capitan

Hi all
I ' am receiving these errors on a fresh iMac just installed with El Capitan.
Any help or suggestions for me?
Thanks to you all!
Sascha
Adobe Illustrator CS5 15.0.2 updated
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Professional CS5 11.0.2 Flash update
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Adobe Player for embedding 3.1
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Fireworks CS5 11.0.2 update
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Extend Script Toolkit 3.5.1 update
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Adobe Device Central CS5.0.1
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
CS Live Update for CS5 Services
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Adobe Pixel Bender Toolkit 2.5 update
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Adobe Media Encoder CS5 5.0.1
There was an error downloading this update. Quit and try again later. Error code: U43M1D207
Adobe XMP panels CS5
There was an error downloading this update. Quit and try again later. Error code: U43M1D207

This may depend somewhat on the application, but in the InDesign forum, we found that CS5 does certainly not with El Capitan. Restore a previous version of OS X or upgrade to creative cloud.

permanent error in the extension update manager cs6

I'm having this problem for a while now and its all just impossible for me to do this update. At any time, I try to update extension manager cs 6.0.5 I get an error code (U44M1P7) someone a idea how to solve this problem?
Thank you

Hi haraldmar

Please see below KB: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

HP5550 68.0 "permanent storage full" followed by "49.4C02 error" "keep turning off & then on."

End users reported a 49.4C02 error. They had cycled power on the printer error code and the error code persists.

I went to the printer to see what was going on.

I noticed that a few seconds until the 49.4C02 error appeared on the screen of the printer, there was

a 68,0 error "permanent storage full".

I tried a cold reboot, but it did not help.

Could not watch all print jobs in the print as I didn't know what was the address of the network printer.

The display was frozen on the 49.4c02 error.

I was unable to print the configuration page to find the IP address / number, so I couldn't determine the printer to look at.

I found a solution.

I examined the service manual and found an article on how to initialize the hard disk.

I expect that this might help as I was getting a storage permanent error 68,0 full, a few seconds before the 49.4C02 error appeared.

In all cases, it couldn't hurt to try.

So I power cycle the printer.

The count of memory at startup, I pressed the MENU button and held it until the 3 LIGHTS all light up.

I then released the button MENU. I hit the button the arrow (return). The screen of the printer showed a

INITIALIZE the DISK on the screen.

I pushed the button tick to accept the initialization process.

The screen displayed/hidden between a few different views, then on the READY screen appeared.

Printing all seemed to have disappeared, but at least the printer is online and functional again.

Not sure how happy the end user who has had a print job in printing, but I was happy to have the operational printer again.

Maildelivery error message for a specific when contact of the envoys of Macbook, NOT sending the iPhone.

Hello! When sending mail to a specific contact from my application of Mail of Macbook, I started getting error messages Maildelivery a few weeks ago and discovered at the same time that the mail goes by without problem when sending from iPhone. My Macbook Pro running OSX El Capitan 10.11.5.

The error message I get is:

This message was created automatically by mail delivery software.

A message you sent could not be delivered to one or more of its

beneficiaries. This is a permanent error. The following address(es) failed:

Name@domain

retry timeout exceeded

Reporting-MTA: dns; vie01a-pqmta - at02.mx.upcmail .net

Action: failure

Final beneficiary: rfc822;name@domain

Status: 5.0.0

The error only occurs when the message is sent from Mail on Macbook, NOT sending the iPhone. And only this one contact me. Any ideas? Help would be appreciated since I need to send important emails very frequently. One more thing: this occurs when sending mac.com account as well as the gmail.com account, but both mail on Macbook.

This information should help you get help using iCloud Mail - Apple Support

If you cannot send or receive e-mail on your Mac - Apple Support

Permanently errors

Similar Questions

Maybe you are looking for