Permission denied: connect

Similar Questions

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• SSH session with QNX momentics-> cannot run - permission denied

  Hello everyone I am new to this world to develop a blackberry and I have a question about ssh, it can be quite simple, but a simple tip could save me from going crazy.

  When I open an ssh session with my blackberry and try to execute statements such as ping, it is said:

  Ping $
  SH: ping: cannot run - permission denied

  So my question is: is there a way to access these permissions and run the command?

  I use qnx momentics, a real device and access the ssh by qnx momentics option launch a ssh session.

  I'd appreciate any advice or tips or whatever it is that one can say to help me, thanks in advance

  When you connect via SSH, logged as "devuser". This user has limited permissions... basically these permissions that would be a regular application.

  To run the 'ping', you need a higher level of access. (Check permissions and ownership with "ls-l/usr/bin/ping") This isn't an option, so the answer is no, there is no way to do it.

• java.io.IOException: storage_open(): Permission denied, / tmp/javame8ea/bin /... /appdb/3J.tmp

  Hi all

  I started to follow the instructions and encounter the following issues when emulation usertest.sh testing. Any suggestions? Thanks in advance.

  PI@raspberrypi/tmp/javame8ea/bin $./usertest.sh

  argv [1] = runMidlet

  argv [2] = + UseProxy

  argv [3] == VMAgentBufferSize4000

  argv [4] = - 1

  argv [5] = com.sun.midp.appmanager.AmsLauncher

  argv [6] = - debugger

  argv [7] = - wdogenable

  [INFO] [CORE] iso = 0:javanotify_start_java_with_arbitrary_args() > >

  Java is starting. Press Ctrl-C to exit

  [INFO] [CORE] iso = 0:JavaTask() JAVATASK_EVENT_START_ARBITRARY_ARG > >

  [INFO] [STORAGE] iso = 0:opening for read only/tmp/javame8ea/bin /... /appdb/ams_params.txt

  [INFO] [CORE] iso = 0:initialize resource limit

  [INFO] ISO [CORE] = 0:RESOURCES [0] midpCheckResourceLimit (3, 1)

  [INFO] [STORAGE] iso = 0:storage_open allocated file_desc 0

  debugger port is not supported in the current configuration

  [INFO] [SECURITY] iso = 1:BlacklistServer: customers of loading on the black list of the folder/tmp/javame8ea/bin /... /appdb/blacklist_clients.txt

  [WARNING] [SECURITY] iso = 1:BlacklistServer: cannot load customer blacklist file/tmp/javame8ea/bin /... /appdb/blacklist_clients.txt

  [INFO] [SECURITY] iso = 1:BlacklistServer: loading applications on the black list of the folder/tmp/javame8ea/bin /... /appdb/blacklist_apps.txt

  [WARNING] [SECURITY] iso = 1:BlacklistServer: cannot load application blacklist file/tmp/javame8ea/bin /... /appdb/blacklist_apps.txt

  [INFO] [SECURITY] iso = 1:BlacklistServer: listening to queue has started

  [ERROR] [AMS] iso = 1:InstallCommand: an error during installation of the suite: java.io.IOException: storage_open(): Permission denied, / tmp/javame8ea/bin /... /appdb/3J.tmp

  TRACK: to java.io.IOException: storage_open(): Permission denied, / tmp/javame8ea/bin /... /appdb/3J.tmp >, InstallCommand

  java.io.IOException: storage_open(): Permission denied, / tmp/javame8ea/bin /... /appdb/3J.tmp

  -com/sun/midp/io/j2me/storage/RandomAccessStream.open (), bci = 0

  -com/sun/midp/io/j2me/storage/RandomAccessStream.connect (), bci = 21

  -com/sun/midp/io/j2me/storage/File.openWrite (), bci = 11

  -com/sun/midp/installer/ResourceProvisioning.downloadJar (), bci = 66

  -com/sun/midp/installer/Installer.installStep7 (), bci = 18

  -com/sun/midp/installer/Installer.performInstall (), bci = 139

  -com/sun/midp/installer/Installer.install (), bci = 49

  -com/oracle/midp/proxy/ProxyEventListener.handleInstallCommand (), bci = 376

  -com/oracle/midp/proxy/ProxyEventListener.handleDeveloperAgentEvent (), bci = 75

  -com/oracle/midp/proxy/ProxyEventListener.packetReceived (), bci = 12

  -com/oracle/midp/proxy/JavaChannelDispatcher.process (), bci = 150

  -com/sun/midp/events/EventQueue.run (), bci = 130

  -java/lang/Thread.run (), bci = 5

  You must run usertest.sh as root:

  sudo./usertest.sh

• Error: 13: permission denied when lsnrctl start as root

  Hello.

  I ve installed Oracle 10.2.0.5.0 on Oracle Linux 6.5

  I ve created tnsnames.ora, lisntener.ora, and sqlnet.ora by command line, so a database that is in the State open.

  I can connect by SqlPlus without any problem.

  This is my setup:

  Listener.ora	SQLNET.ora	tnsames.ora
  LISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) ) SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = home/oracle/oracle/product/10.2.0/db_1) (= Extproc PROGRAM) ) (SID_DESC = (GLOBAL_DBNAME = MyLinuxDB) (ORACLE_HOME = home/oracle/oracle/product/10.2.0/db_1) (SID_NAME = MyLinuxDB) ) ) LOCAL_OS_AUTHENTICATION_LISTENER = OFF	NAMES. DIRECTORY_PATH = (TNSNAMES, ONAMES, HOSTNAME) SQLNET. AUTHENTICATION_SERVICES = (none)	MyLinuxDB= (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = MyLinuxDB) ) )

  When I run with the user Oracle lsnrctl services I have this output:

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))

  Summary of services...

  Service 'MyLinuxDB' has 1 instance (s).

  Instance of 'MyLinuxDB', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service 'PLSExtProc' has 1 instance (s).

  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  The command completed successfully

  But if I type tnsping MyLinuxDB having the same Oracle user I have this:

  Use settings files:

  /Home/Oracle/Oracle/product/10.2.0/Db_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = MyLinuxDB)))

  AMT-12541: TNS:no listener

  Another strange behavior is that I can stop or start the listener with the Oracle user, but if I try as long as user root I have Don t have permision to launch, I can only stop it as root.

  lsnrctl stop [root] #.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))

  The command completed successfully

  [root] # lsnrctl start

  From /home/oracle/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...

  TNS-12546: TNS:permission refused

  AMT-12560: TNS:protocol adapter error

  AMT-00516: permission denied

  Linux error: 13: permission denied

  Can someone help me understand what I am doing wrong?

  Concerning

  You can provide the IP address instead of the host name "localhost" and check

  Confirm also that IP also available on file/etc/hosts

  also share the output of command below

  ps - ef | grep lsnr

  If several found lsnr then you can kill the lsnr and start the listener and check status lsnrctl.

• Converter 5.5 - permission denied for operation error

  I Converter Standalone installed on my laptop, I put in the vCenter IP or name, any, enter the administrator account and always get permission denied to choose the virtual machine to v2v would be. The identifier of the administrator is the same that the administrator of domain/local on the server vCenter and the same connection works correctly for vCenter Server is the only connection that I never use. I added the account domain administrator for the Local administrators on the server vCenter account...

  What should I do?

  Thank you, Tom

  I found the worker log files. I do not have the appropriate permissions in the search folder to this topic.

  It is said that he borrows my own domain name.

  Runs the converter 5.5 * Administrator * fixed things.

  There is no need to do before I can remember.

  Now I know what to do, run the converter as an administrator.

  Thank you, Tom

• Select permission denied on RPD

  I am mapping data in my file of RPD and cannot not row data or view up-to-date account for almost all of my tables in the database.

  I am obiee 11 g running on my local machine connected to a sql server database.

  The error I get is "Select permission denied on object... ». I spoke with the DBA and I should have sufficient privileges for my project.

  Any help would be greatly appreciated.

  Thank you

  Mike

  Hi Mike,.

  My guess is that you have not permission to query the table. It has nothing to do with the administration tool.

  You can query this table in SQL SERVER STUDIO... Let me know you conclusions...

  Thank you

  Vincent

  OBIEEDeveloper

• ORA-27369: jobs of type EXECUTABLE failed with exit code: permission denied

  Dear experts,
  
  I created a simple external job to run the export job (expdp) to be run from PL/SQL. When I create a job as user SYS, labor runs well, but the same fails when I run it as a user of the application. I'm sure I'm missing a few privileges. I go through internet, MOS for a solution, but could not find a (my bad!).
  
  Grateful if you could point me the right direction.
  
  Here is the work:
  

  BEGIN
  dbms_scheduler.create_job(
  job_name => 'mytestjob',
  job_type => 'executable',
  job_action => '/u01/myexpdp.sh',
  enabled => TRUE,
  auto_drop         =>   FALSE);
  END;
  /
  
  
  exec dbms_scheduler.run_job('mytestjob');

  performance of the work as a user 'TEST '.
  

  SQL> show user
  USER is "TEST"
  SQL>
  
  SQL> exec dbms_scheduler.run_job('mytestjob');
  BEGIN dbms_scheduler.run_job('mytestjob'); END;
  
  *
  ERROR at line 1:
  ORA-27369: job of type EXECUTABLE failed with exit code: Permission denied
  ORA-06512: at "SYS.DBMS_ISCHED", line 185
  ORA-06512: at "SYS.DBMS_SCHEDULER", line 486
  ORA-06512: at line 1
  
  
  SQL>

  permissions of files

  -rwxrwxrwx 1 oracle oinstall 1539 Mar 21 17:58 /u01/myexpdp.sh

  expdp script

  cat /u01/myexpdp.sh
  
  #!/bin/bash
  source /home/oracle/.bash_profile
  
  ORACLE_SID=TESTDB
  
  /u01/app/oracle/product/11.2.0.1/db1/bin/expdp parfile=/u01/expoptions.txt

  expdp settings file
  

  cat u01/expoptions.txt
  userid=scott/tiger
  directory=DATA_PUMP_DIR
  dumpfile=test.dmp
  tables=emp

  Published by: Prem Kumar on March 21, 2013 04:14

  Have you defined a credential for your host with dbms_scheduler.create_credential connection and specified the credentials with the work?
  --
  John Watson
  Oracle Certified Master s/n
  http://skillbuilders.com

• Windows 2008 Server NFS - permission denied when accessing the NFS data store

  Hello

  I'm trying to configure a Windows 2008 Server to store virtual machines on an NFS share.

  When I add the data store to my host, I have no Brown Read-only and the data store is added successfully.

  When I browse the data store, as soon as I try to delete a file or create a folder, I have an error message: "cannot delete" or "cannot complete the file was created.

  It seems to be a problem of rights NFS, but impossible to find what the problem is.

  In the/var/log/vmkernel, I see:

  Mar 23 17:43:07 vmw-esx1 vmkernel: 1:02:37:20.635 cpu4:4109) NFSLock: 2677: can't get the lock on the file new document texte.txt 0x4100070384d0 on circe (10.254.0.19): Permission denied

  Don't you have a howto use NFS with Windows 2008 to help me?  I found one for Windows 2003, but think are too different.

  Or another idea?

  See document attached with the NFS share parameters.

  Philippe

  You must configure the user name mapping in Services for UNIX/NFS and map the root user.  Detailed instructions here: http://www.sohoadvisers.com/tutorials/vmware-esxi/connect-esxi-to-windows-nfs.  I was able to implement some hosts to use my Windows NFS export, but it was a bit unreliable.  This is a configuration not supported with VMware...

  Josh

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Visit http://vmtoday.com for news, views and virtualization how - to of

  Follow me on Twitter - @joshuatownsend

• AMT-00516: permission denied

  Hello
  9 on a Vmware virtual machine (Win 2003), I am logged on as administrator but cannot start listener:
  

  TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
  Le fichier de paramÞtres systÞme est E:\oracle\ora92\network\admin\listener.ora
  Messages de journalisation Úcrits dans E:\oracle\ora92\network\log\listener.log
  Attempted to listen on: : (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=optim65-
  win)(PORT=1521)))
  TNS-12546: TNS:permission denied
  TNS-12560: TNS:protocol adapter error
  TNS-00516: Permission denied
     32-bit Windows Error: 13: Permission denied
  
  Listener failed to start. See the error message(s) above...

  As I have seen on the Web, it's a permission problem and I gave full permission for everyone on Oracle home directory. Administrator is the Member of the ORA_DBA group.
  
  Here's the listener.ora:

  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = optim65-win)(PORT = 1521))
        )
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
        )
      )
    )
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = PLSExtProc)
        (ORACLE_HOME = E:\oracle\ora92)
        (PROGRAM = extproc)
      )
    )

  And sqlnet.ora:
  

  # SQLNET.ORA Network Configuration File: E:\oracle\ora92\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  
  SQLNET.AUTHENTICATION_SERVICES= (NTS)
  
  # This file is actually generated by netca. But if customers choose to 
  # install "Software Only", this file wont exist and without the native 
  # authentication, they will not be able to connect to the database on NT.
  
  NAMES.DIRECTORY_PATH= (TNSNAMES)

  Thank you.

  9iR2 is desupported over 3 years. I remember that the liberation.1 has not been certified on Win2003. This usually results in the type of error you have.
  I recommend the upgrade to GR 11, 2.

  ---------
  Sybrand Bakker
  Senior Oracle DBA

• TNS-12518 TNS - 12546 Linux error: 13: permission denied

  Hello
  I'm really sorry to disturb this forum with this stupid question but I am really new to oracle and I don't really know what to do in this case.
  recently, I installed oracle 10g release 2 on a box of Centos64bit.
  I was able to complete the installation, and apparently everything is working relatively well since im able to connect to oracle with the oracle user, I created using sqlplus.
  now the problem im is that im trying to connect to oracle with sql developer, but I get this message: "had at least one appeal of reading:
  I checked the logs and display is the following:
  
  TNS-12518: TNS:listener could not hand off client connectionl
  TNS-12546: TNS:permission refused
  AMT-12560: TNS:protocol adapter error
  AMT-00516: permission denied
  Linux error: 13: permission denied
  
  Of course, the problem has to do with permissions.
  given that I don't really know where to put the permissions. what I've done so far is affecting permission 755 following to the network folder of the jump oracle, which will solve the problem, but it didn't.
  I also set the following parameter:
  TCP.validnode_checking = no
  the sqlnet.ora, file, but that has not worked.
  
  Could someone please help me with this!

  Hello

  Verify that this listener is running under the same user as the database instance.

  HTH Mathias

• 002606 BEA: Weblogic server runs on port 80 - permission denied.

  Hello
  
  I'm new to weblogic, just started playing with it. I have installed weblogic server with a cluster consisting of 2 servers, all running on the spot. I tried to configure the functionality of web server on weblogic 10.3. I followed the exact steps described in http://edocs.bea.com/wls/docs103/config_wls/web_server.html, but now I get a permission denied error:
  
  < 2 December 2008 15:00:10 > < Info > < NodeManager > < working directory is "/ opt/bea/user_projects/domains/firstDomain" >
  < 2 December 2008 15:00:10 > < Info > < NodeManager > < server output log file is "/ opt/bea/user_projects/domains/firstDomain/servers/server03/logs/server03.out" > "".
  < 2 December 2008 15:00:12 MYT > < Info > < WebLogicServer > < BEA-000377 > < since WebLogic Server Java hotspot Server VM Version 10.0 - b19 Sun Microsystems Inc. >
  < 2 December 2008 15:00:13 MYT > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
  < 2 December 2008 15:00:16 MYT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 2 December 2008 15:00:16 MYT > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
  < 2 December 2008 15:00:16 MYT > < opinion > < Log Management > < BEA-170019 > < server log file /opt/bea/user_projects/domains/firstDomain/servers/server03/logs/server03.log is open. All events in the log server-side will be written to this file. >
  < 2 December 2008 15:00:26 MYT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
  < 2 December 2008 15:00:41 am MYT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
  < 2 December 2008 15:00:41 am MYT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 2 December 2008 15:00:44 MYT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  < 2 December 2008 15:00:44 MYT > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >
  < 2 December 2008 15:00:44 MYT > < opinion > < Cluster > < BEA-000133 > < awaits to synchronize with other members of clusters-00 running >.
  < 2 December 2008 15:01:14 MYT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  < 2 December 2008 15:01:14 MYT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  < 2 December 2008 15:01:14 MYT > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >
  < 2 December 2008 15:01:14 MYT > < opinion > < Cluster > < BEA-000162 > < SRS 'man' departure with remote cluster address "null" >
  < 2 December 2008 15:01:14 MYT > < opinion > < Cluster > < BEA-000162 > < ' man-async"replication service to start with remote cluster address"null">
  < 2 December 2008 15:01:14 MYT > < error > < Server > < BEA-002606 > < cannot create a server socket to listen on the channel "Default". The 172.16.141.1 address may be incorrect, or another process is using port 80: exception java.net.BindException: Permission denied. >
  < 2 December 2008 15:01:14 MYT > < emergency > < security > < BEA-090087 > < link to the configured Admin port the server failed. The port may already be in use by another process. >
  < 2 December 2008 15:01:14 MYT > < error > < Server > < BEA-002606 > < cannot create a server socket for listening on channel 'Default [3]. The 127.0.0.1 address may be incorrect or another process is using port 80: exception java.net.BindException: Permission denied. >
  < 2 December 2008 15:01:14 MYT > < critical > < WebLogicServer > < BEA-000362 > < server failed. Reason: The server doesn't have to bind to any port can be used. See the log for details message. >
  < 2 December 2008 15:01:14 MYT > < error > < Server > < BEA-002606 > < cannot create a server socket for listening on channel 'Default [2]. The 10.8.8.31 address may be incorrect, or another process is using port 80: exception java.net.BindException: Permission denied. >
  < 2 December 2008 15:01:14 MYT > < error > < Server > < BEA-002606 > < cannot create a server socket for listening on channel 'Default [1]. The 192.168.140.1 address may be incorrect, or another process is using port 80: exception java.net.BindException: Permission denied. >
  < 2 December 2008 15:01:14 MYT > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
  < 2 December 2008 15:01:14 MYT > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
  < 2 December 2008 15:01:14 MYT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
  < 2 December 2008 15:01:14 MYT > < opinion > < Cluster > < BEA-000163 > < replication service to stop "async" >
  < 2 December 2008 15:01:14 MYT > < opinion > < Cluster > < BEA-000163 > < replication service to stop "man" >
  < 2 December 2008 15:01:14 MYT > < opinion > < Cluster > < BEA-000163 > < "async" man-stop replication service >
  < 2 December 2008 15:01:15 > < Debug > < NodeManager > < waiting for the process to die: 19768 >
  < 2 December 2008 15:01:15 > < Info > < NodeManager > < server failed during startup, so won't be restarted >
  < 2 December 2008 15:01:15 > < Debug > < NodeManager > < returned runMonitor, finished setting = true and notification servers >
  
  
  Netstat displays:
  
  netstat - year | grep 172.16.141.1
  tcp6 0 172.16.141.1:7001 0: * LISTEN
  tcp6 0 172.16.141.1:7005 0: * LISTEN
  tcp6 0 0 172.16.141.1:43991 172.16.141.1:7001 ESTABLISHED
  tcp6 0 0 172.16.141.1:7005 172.16.141.1:46728 ESTABLISHED
  tcp6 0 0 172.16.141.1:7001 172.16.141.1:43991 ESTABLISHED
  tcp6 0 0 172.16.141.1:46728 172.16.141.1:7005 ESTABLISHED
  tcp6 1 0 172.16.141.1:43999 172.16.141.1:7001 CLOSE_WAIT
  UDP 0 0 172.16.141.1:137 0.0.0.0: *.
  UDP 0 0 172.16.141.1:138 0.0.0.0: *.
  
  Port 80 is not used by intellectual property. Am quite lost for the moment on how to solve this problem.
  
  Appreciate all advice offered. Thanks in advance.

  non-root users cannot bind to port 80. This is a restriction of Unix, not a matter of WebLogic.

  Usually WebLogic instances running on an unrestricted port and load balancers and web servers running on port 80, redirecting to the WebLogic instance.

• I get this error msg - permission denied for &lt; Web page &gt; get XPCComponents.classes property

  A couple of days, I started getting the msg of error-permission denied for < Web page > get the XPCComponents.classes property. It happens with every Web page I visit. If I hit the x in the upper right so I can access the page. Is not in Internet Explorer. Any ideas how I could solve this problem and why she started to happen?

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

  If you look in the error for this XPCComponents.classes error Console, there should be a Source file: chrome: / / address that could give us information which extension is causing this message.

  Firefox button > Web Developer-> Console for errors or simply use {Ctrl + Maj + J} from the keyboard

• Why do I get this error:? Permission denied for my {URL} call the UnnamedClass.toString method on.

  When I click on links to external sites on my site, I get the following error, like 5 times, and yet, it always opens the other site after clicking the OKs. For example, click on "Host Hotel' on the left NAV.

  Error: Permission denied to call method UnnamedClass.toString on.

  URL of affected sites

  http://www.TGIF-classic.org

  Norton Toolbar is the culprit. I work with Norton to get addressed.

• File access permission denied

  Hello

  Recently, when I start CVI with the project, I work on I get the error message "file Access Permission denied."

  I have bellive that started after a Windows Update.

  I have servicepack2 CVI 2013 and Win7

  Considered by

  Dear fluidtronic,

  Well, if operate you from your USB key. I don't think that the installation of the CVI is the problem here. Instead I recommend you look at att file and catalog read/write privileges.

  Best regards