Permissions of applications?

Similar Questions

• Someone at - he saw "LIBTMIB_CAT:147: ERROR: violation of permissions on application SET?

  I'm trying to add a computer to a domain of Tuxedo 10.0 and when I active (via UD32), the new machine, I have the permissions problem.  Does anyone know how to check the TMIB permission settings?

  This environment is a development environment.  The "tmunloadcf" showed "MIBMASK 77", which seemed to be my problem.  I couldn't change TA_MIBMASK in the * section of RESOURCES by using UD32 or tmadmin/config tool.  I did a "tmunloadcf" in a file, edited the file by removing the MIBMASK entry in the * RESOURCES (resources), judgment of the DEV field, did a "tmloadcf' with the edited UBBCONFIG file, has a"tmboot-y"and then I could add the new machine using UD32 and also to activate the machine.  The TA_MIBMASK are not editable in a domain running.

  I just wanted to share.

• Permissions question

  Hello

  There was another thread where the object of permissions for applications came. When I started using Android, I was careful about loading the applications who have had more that should be with permissions, but I slacked. I went back and checked. now, I'm mad that I gave as a BarCode Scanner apps on access to all of my personal information. My fault, I should have checked.

  I found an article that I thought was useful.

  http://Lifehacker.com/5991099/why-does-this-Android-app-need-so-many-permissions

  
  

• Reset the State of the permissions for the BBM integration tests

  For the purposes of testing, I want to cancel my BBM surveys application registration and clear all permissions for this.

  Now when I remove and redeploy the application, he recorded again but do so without up permissions dialog window to ask if I want to allow it to access BBM or not.

  What should I do to get that back? If I go to the window of permissions of Applications in the settings (which is extremely buggy, incidentally) and disable the authorization of BBM, it does nothing but block the application to use BBM.

  Try to change your application id then. (The in the bar descriptor). That * has * to work, by definition. If it isn't, then you're doing something wrong, I think. If you change the id app, it's actually a different application.

• How to check permissions

  Hi guys

  I'm developing an application and I am facing some problems.

  The application needs to read SIM data in order to display information according to the country of the SIM card. The first thing it does after opening is read the SIM. If no SIM card is detected an error, if one can read that the app displays a list. I'll get into the details.

  I added in the descriptor bar of permission of "read_cellular_data". When the app opens for the first time, it asks the user for authorization, which is normal. After that the validated user presses, the screen remains black. Reduce to a minimum the application does that visible splash screen. Only, you can close the application.

  After opening the app for the second time, the application works normally.

  Also, when I ask the State of the SIM using 'SimCardInfo () .state (); I'm "NotDetected" If there is no SIM and if the app has no authorization. I would like to know how to tell the difference between these 2.

  My theory is that I need to check for permission, but I can't find any info on the permissions. All I've found is the following pages:

  The App permissions page, which does not describe how to check permissions

  and this post on the forum, that isn't for BB10

  Any help/advice/pointers would be greatly appreciated.

  Pepe

  I have seen that some permissions are not documented (can´t recall now another example).

  But in the SimCardInfo.hpp, you can find it:

  /*!
       * @brief Retrieves the unique identifier for the country where the SIM card's home network
       * is located.
       *
       * @details The mobile country code (MCC) is composed of 3 or 4 decimal digits. For further
       * details about the structure of the MCC, see ITU-T recommendation E.212.
       *
       * @return The country code of the SIM card's home network encoded as a string or an empty
       * string if the caller does not have sufficient permission or the SIM card's state is not
       * @c SimCardState::Ready.
       *
       * @permissions The application must have the @c read_cellular_data permission to access this method.
       *
       */
      QString mobileCountryCode() const;
  

  The application asks permission when opened, and without her, I can't read the SIM card, if the authorization is functional.

  Told me by e-mail from a developer evangelist at the moment, there is no way to check/change the permissions.

  My problem was that the application tried to read data from the SIM card what it opened, while approval has been invited only to the first opening of the app, and once you have accepted/refused, the app would remain on the start screen.

  My solution was to present a welcome screen only the first time that the application is open, so no SIM data would be read while the authorization is requested.

  See you soon!

  Pepe

• Check the permissions

  We need access to the features limited on the device. Device permissions, the application requires can be specified in the application BAR descriptor file.

  Is there a way to check if the permissions are denied or allowed by the user?

  The API provides a class of ApplicationPermissions.

  There is no direct and unified API for this (yet). For now, try to perform any of the restricted stock and catch the exceptions that are triggered.

  For example, if you try to make a list of directories on the commune / subfolders and have no access_shared granted by the user, you should get a permission violation.

• Screenshot blank if permissions are "guest."

  I have an application that allows the user to take a screenshot. It uses the following method:

  screenshot (Bitmap bitmap, int x, int y, int width, int height)

  Permissions for application if the screenshot permission is set to "Prompt". When the call is made, as expected, it appears a dialog box asking permission [Allow/Deny]. Even if allow is enabled, I get a blank screen capture.

  If the do not show the box is checked, the following calls are successful and I get the picture.

  If approval of the application is "Allow", then return it also successfully.

  I confirmed on Blackberry OS version 4.5. I'll update the post when I try it on other versions.

  I'm not sure that this is a problem or not, I've never fired it.

  The solution that I use is to ask the user to do it again.

• BlackBerry Smartphones looking reboot / battery pull App for BES / what permissions are needed?

  I tried to use again Me in my 9900, but is not compatible with BES. Not all the permissions the application, but it does not work. It just hangs. I asked the seller the necessary permissions, and they seem to be completely put out on this issue. They simply said of all the permissions must be enabled. On the right, as the computer SCIENCE Department will go for this.

  I don't mind paying for an app if it works and if I can get a clear indication of what permissions requires.

  If you use a reboot / battery traction app with BES, which do you use, and what is the permissions it requires?

  I just found out that ALT BACKSPACE of RIGHT SHIFT causes a reboot. Now, I have no need of a battery pull application.

• Why are there several layers of folders 'Application Data'?

  Why does Windows 7 Professional x 64 creates structures of files like this:

  C:\Users\Settings\Application Data\Application Data\Application Data\Application Data\...

  and so on for several levels? For example, one of the user accounts on my computer has 6 six layers of Application Data files. And each Application Data folder is identical under folders, including a subfolder of Application data that leads to the next level of data Application, etc. etc.

  Is it normal for Windows 7, and if so, what does that mean? If not, is this a sign of a problem?

  Thank you for your understanding.

  I finally found my answer.

  Application data 'folder' keeps reproducing itself as a subfolder when you change the permissions for the Application data folder, usually giving you full permissions to the c:\users\ folder. It's exactly what I was doing.

  The Application Data folder is a crossroads, that points to the parent folder.

  C:\Users\\AppData\Local\Application Data\

  points to

  C:\Users\\AppData\Local\

  Spawning occurs when permissions for Application data 'folder' (junction) are changed. Application data must have the following permissions:

  Deny - all - list folder / read data - - this folder only

  Cela (wisely) to avoid recursion when a non Windows 7 aware application scans the Application data 'folder', and this is also the reason for the "Access denied" message you get on some folder in c:\users\. This leads some people, like me, to take complete control of the folder. I should know better.

• Application server configuration

  I'm putting in place the ATG app on my machine.

  I have installation 11.1 ATG with app server Weblogic 12.1.3.0. While the implementation of ICD I am error ' invalid Weblogic version: 12.1.3.0.0 taken in charge: [12.1.2] '

  Document is saying something like:

  When you install an application server, you can install a supported version and a version that is not supported by permit. Application server configurations are found at /atg/cim/productconfig/
appserver/SupportedApplicationServer.properties .
  

  [ Oracle ATG trade Web - Application Server Configuration]

  But I am not able to find the file of property mentioned in the record of the ATG.

  Could someone help me solve this problem?

  Thanking in anticipation.

  Hello

  The property file can be found in: CIM\lib\classes.jar\atg\cim\productconfig\appserver

  Please find the reference document for more information below and understand the best, hope that helps you.

  Problem installing Oracle trade 11.1 on Weblogic 12.1.3 (Doc ID 1922316.1)

  Please select a correct answer if this answer solves your problem.

  Thank you & best regards

  Suman Vernoux

• Permissions are not updated with replacement of already compressed file

  Thanks jim,

  Now, I am able to replace the already packed file after adding line in the package configuration file.

  Jim, I tried to replace a file already compressed with more permissions in application package. I mean previously I locked the permission to copy, but when I was replacing the file I have authorized copying. The code returned xml enabled copy permissions but copy console admin permissions are still under the previous name.

  Please suggest me how to change the permission with the replacement of the file.

  Kind regards

  Truth Mangal

  You can modify the permissions by launching calls admin ManageResourceKey endpoint, with action = "update", by specifying the resource id and new permissions that you want.

• A few quirks after a 6 s iCloud restore iphone

  Yesterday, I went to the Genius Bar for my iphone battery testing 6.  They have made a reset on my phone and restore from iCloud (fully and recently supported).  Once done with the basic restore process (about an hour), I left it home, plugged in, connected to my wifi, and restoration took over.  Sort of.

  After a little while, my pictures were there, but my app icons where mostly shaded and restoration seemed "stuck." I searched and found many others had this problem and went through a few solutions. I had to reset the network settings for restart.  But then I had to individually press each icon grayed out to restore.  Who SLOWLY worked most of the time, for some, I went on the App Store for my apps also purchased and clicked on the little icon of cloud with an arrow pointing down to restore a part of there (I have not seen all my pressing gray icons worked).

  When I went to bed last night that it seemed my icons grayed not done, long after hours and hours of clicking on icons.  But in the settings, he always said that the restoration was underway, that gives me the choice to cancel the restoration.  I do not cancel.

  When I woke up this morning, the restoration was done. Phew.

  So, I carefully checked my important apps and they are there and work.  What is important, all of my Camera Roll photos seemed to be there.  But there seems to be some quirks:

  • I have a third-party application that stores photos outside the film, and these photos were not there (not a big deal for me).
  • Some applications of photo as photo Hipstamatic app, had the photos I took with it in their own folder.
  • I had to grant permissions for applications whenever I'm loaded up (such as for access to the camera).
  • I had to re-login to any site that requires a password.

  What do you think of this?

  • Is it normal to have to re - grant permissions for each application who needs who?
  • Is it normal to have to re-login to websites? (Guess what?)

  But here's a question that has concerned me somewhat: If an icon is grayed out when restoring has remained fairly well, and instead tap the icon to try to restore, I went purchased apps from the App Store and downloaded from there instead (by clicking on the small icon of cloud), it restores the application AND local data that I might have associated with it?) or it only downloads the app and I'm screwed on all local data?

  I'm not sure and unfortunately do not know what is the official answer, but I'll tell you from my personal experience, I went through the same.

  I saw where I saved on iCloud, restored from the same backup and had problems with my apps, for example, having to connect in them, losing scores high in game applications, etc.

  I know that when I backup on iTunes and encrypt the backup, I was able to recover all applications and their data comfortably.

• 33.1 incompatible Firefox with Symantec Endpoint Firewall

  This morning, I received a message from Firefox indicating that a new version (33.1) Firefox is available - so I took the auto-update feature. Since the update, I found that Firefox can no longer connect to the internet. Suspect a firewall issue, I disabled firewall Symantec Endpoint and found that Firefox suddenly worked again. Since it is a working PC, I have to keep the active firewall (and I like to do anyway). Symantec does not seem to have any ability to add individual programs as exceptions. We have the ability to allow all IP traffic, or just IP application traffic.
  The new Firefox is simply incompatible with Symantec Endpoint? Why the version that I had (33.0.3 if I'm not mistaken) would have worked without problem?
  As another detail, I would add that when I click on the handler Extension/add-on in Firefox, I see that protection against vulnerabilities Symantec 12.3.0.3 - 1 is not compatible with Firefox 33.1; I guess that's part of the problem? (And if so, should I contact Symantec?)

  Hello! Thank you for your response. Unfortunately, Symantec Endpoint does not allow the user to set individual permissions for applications (even at the level of the administrator). However I solved the problem! I realized that the version of Symantec Endpoint installed on my PC has been 12.4111.4516, and that there is a version more recent (12.5) available. My server of the company does not notify me of new versions of software available - but after I installed 12.5, everything works again. For the other user who also has this problem, even if you do not have access to 12.5, you can see if you can reinstall Symantec Endpoint to see if it works for you.

• Is there that something called "permission to start?

  It is supposed to allow to choose what applications start automatically after turning on the phone.
  
  Is this what? If so where is it?

  Like this, the permissions are not accessible to the user. They are defined by the developer of the app and when you install an application, it lists the permissions to applications for the app.

• (Xperia Ray) Can't install Apps after ICS put updated!

  Hello world.

  I bought mine (Xperia Ray) a few days ago and updated with the update for ICS service software.

  now, I can not install all the apps.

  When I click the button install (photo), where it shows the permissions the application needs, nothing happens.

  When I click the button cancel, (obviously), it cancels the process.

  

  all the ideas!

  Thank you

  but this isn't google's fault, it's a question of policy

  repair your phone and try again

  Don't forget to mark the correct answers & useful answers