Problems with the graphics/video card?

Similar Questions

• H8 1241: problems with the new video card on h8 1241

  OK, I've seen a lot of posts on this topic, but I couldn't find anything yet. I bought this computer as a windows 7, but have just upgraded to windows 10. The stock video card HDMI port came out, so I ordered an ASUS Geforce gtx 750ti to replace.

  http://www.Amazon.com/GP/product/B00IB9P1KG?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

  When I try to boot with the new card I get the blue screen that tells me to Press esc to get into the BIOS, but it is freezing it (I am not able to get into the bios).

  Currently, the only way to make changes are re - insert my old card. I can not even start without secondary card by using the on-Board (which could as a result of the changes that I made in the BIOS). Most of the solutions I've seen involved changes in version 8 of the BIOS but I can't get that. I tried to update my BIOS to the latest version for windows 7, but I don't think it worked b/c I am on windows 10 now.

  Help, please!

  Hello

  The level of your PC motherboard BIOS is not compatible with the cards NVIDIA GXT 7xx series.

  Contact ASUS to obtain redress. ASUS has maybe a video BIOS update or a different graphics card that will work in your PC.

  A NVIDIA GTX 660 new or used may be your best bet.

  Thanks for posting on the forum.

• my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

  computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

  To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
  Help would be much appreciated?

  Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

  Thanks for the effort though...

• There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  Hello

  Please contact support: -.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Hope this helps!

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Problems with the graphics card when you use AutoCad

  Hi, I have a dell xps 18.4 - i7 with 8 GB of RAM, when I'm working with Auto CAD I face problem with my graphic card, what can I do to fix this? has any experience with that? the graphics card is Intel(r) HD Graphics 4000

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I suggest you to try installing the driver in compatibility mode and tick.
  Reference:
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please keep us informed.

  Thank you

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

• Computer does not start with the new video card

  Hello

  I have hp pavilion 500-277cb and I love it, but it won't work with my new video card

  The video card is
  Sapphire ATI over-pants 2460

  I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.

  It seems to me to have the latest version of the bios and windows 8

  What can I do else?

  Thank you very much

  Best,

  Korhan

  Hi JM,

  Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?

  Your PC comes with one of the following built-in Intel graphics drivers:

  • Graphics Intel HD 4400 (GT2)

• Problems with the graphic driver for Elitebook 8460p

  Hello

  I m of the problems with the Elitebook 8460p driver display. The latest version (15.28.20.64.3347), published on 16 June 2014 have some problems on the laptop. When the laptop is running on battery screen suffers from flicker and damaged graphics, as you can see in this video:

  https://www.YouTube.com/watch?v=gQ1w0aOaF7A

  (you can see the flickering between 0:20-0:22)

  I contacted with support local hp and send me a COMPUTER technician, who has changed my motherboard and CPU, but nothing worked. I tried to contact with intel for support (the issue is present with drivers intel non - oem), but they are sending me to the OEM. I would like to have a real driver that works with the system (3347 is a driver of the year), is it possible?

  This isn´t of question at all in linux drivers, more change motherboard I totally ignore a hardware problem.

  I can provide feedback to any solution.

  Thank you!

  Another update:

  Found a solution to this thread (which I started) in the forums of intel:

  https://communities.Intel.com/thread/48327?start=0&TSTART=0

• I have a problem with the choppy video playback.

  I recently bought a surface of windows. When I play the movies from my hard drive, playback is choppy, although there is no problem with the sound. Is this a setting problem or software? The files are AvI, which should be compatible. Any help would be greatly appreciated.

  Hi, Bertie,.

  1. what video player do you use? Have you tried another?

  2. do you have all the updates of Windows and Windows Store on the device?

  This problem can be caused if the video driver is outdated.

  You can check the link and follow the steps in the Microsoft KB article and check if it solves the problem.

  Troubleshoot video card

  http://Windows.Microsoft.com/en-CA/Windows-8/find-install-display-drivers

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Satellite M30 - problem with the graphics driver and Quicktime movies

  I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

  I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

  Can someone tell me why this might be?

  Hello

  Do you use the graphics driver from the Toshiba driver page?

  Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
  This version uses these features:

  -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
  -Codecs QuickTime [version 7.1.3.100]
  -QuickTime plugin for Internet Explorer
  -QuickTime plugin for Opera/Mozilla/Netscape
  -Extra plugins for QuickTime
  -QuickTime DirectShow parser
  -Wrapper DirectShow QuickTime decoder
  -CoreAVC 0.0.0.4
  -CoreAAC 1.2.0.575

  check it out...

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Having a problem with the graphic quality of vector graphics in flashswf in Dreamweaver

  Hello

  
  

  I have a flash slide show, I built for a dreamweaver site that contains images of vecctor who lose quality when I run my site on the domain. I tested the file flash in flash is superb. I saw in live mode view in dreamweaver graphics look smooth but when I load my files ftp on my account from the host and test from there, the quality of the edges of the vectors is not smooth. I see a lot of irregular contours and don't know why.

  
  

  I test everything on my monitor 24 inch so the graphics are probably enlarged but even when I test the flash in flash file and the html file from my hard drive to a browser such as firefox my graphics are smooth, so don't know if his problem-solving.  also tested my site on my laptop which is a smaller screen 15 inches and the graphics look bad on the website there too. F of course it's a problem of resolution, I think that screen 15-inch would be showing the graphics smoothly not serrated. ?????

  
  

  Anyone has any ideas or can you help me with this problem? I have

  
  

  Johanna

  Ok.  And just to add, you can natively import files HAVE on the Flash stage.  And I'm no Flash expert by any means, but there are a few settings, you can change.  In the document settings, you can change the framerate.  Usually 30 fps runs smoothly.  Then on the publication settings you can disable compression, increase the JPEG quality and enable hardware acceleration for computers running Flash 10.2 or later with the graphical features.

• Huge problem with the graphics card. Help me pls!

  Unfortunately my pc is not guaranteed, so my last hope is here on the forum.

  I have Dell Inspiron 580

  

  Ok.So the problem was that I found myself not being able to open My Nvidia Control Panel to verify customization as one of my games was so bad. That's why I found that my disappeared from Nvidia and Intel HD Core i3 graphics took place.

  

  And yes my pc used to run with Nvidia I have proof: P

  

  I must say that for me (as a heavy gamer) was a great kick as Intel uses all my CPU and my games become so difficult to play.

  I have tried everything that I could to restore the return of Nvidia (except one: to reinstall windows) but not one chance :(

  Reinstalling the drivers did not help actually I don't even know the type of driver that I need because that Nvidia is not found.

  Any advice? It will go to normal if I reinstall windows?

  Thanks guys and sorry for my bad English :D

  Hi Georgina26,

  You use the graphics card onboard because your monitor is connected to the video port badly. Turn off the system, unplug the video cable and connect it to the video card into the PCIe slot.

  If you are not familiar with the snap of a monitor on the back of your computer, please let me know and I will give a link to some photos.

• problems with the graphics card after installing windows 7, code 43

  I installed windows 7 & my ATI-RADEON XPRESS 200 SERIES is stopped by windows 43.It code stipulates that drivers are ok... but it is not recognized... I also downloaded a few 3d Screensavers & they worked very well now, it is not able to open the screensaver because of the video card or to be compatible with Direct 3D... This question has not pop up until after you have installed windows 7, I have checked & found a lot of problems with windows 7 & ATI-RADEON XPRESS 200 SERIES drivers or recognition. Tried to update the driver but the States, it is far, but windows 7 is having a problem with drivers... Y at - it a fix for this, looks like it should be a matter of windows & microsoft should have action corrected problem because windows is caused this problem... Have installed all windows updates & all up to date... Can someone try to give me a solution to fix this problem? Not sure if they have an upgrade or accelerator program 3d graphics that may have to be installed... & again thanks if anyone can help... Have a great day...

  ATI-RADEON XPRESS 200 SERIES is an accelerator of limited DirectX 9 graphics (integrated graphics), which was

  published in ' 07 and apparently is not compatible with Win7.

  Old hardware with a Windows version compatibility isn't something that never gets fixed by SM.

  It is the mfg of the material to support the product through a driver updated, and trend of integrated graphic card

  not be supported as long as a dedicated graphics card.

  In this case support drivers apparently stopped with Vista.

  If you try to get drivers via Device Manager or Windows Update they can provide incorrect information

  What about drivers who are up to date.

  These two methods are a little known does not install the proper drivers for the graphics.

  I read that some people have had luck on Win7 with the Vista drivers for various materials. Doesn't hurt to try.

  You can download the drivers for XPRESS 200 SERIES from the AMD website below-

  http://support.AMD.com/en-us/download

  .