Persistent problem - monitor loses input DVI Signal then recovers

Similar Questions

• The monitor loses signal after some time

  During the installation of windows vista, the monitor would lose the signal after some time (the screen turns black and does not) while the computer is still on.  I am currently using ATI radeon hd 5750 and I tried to connect two monitors to the video card and it wouldn't work (both monitors loser of the signal)

  Hi PaulYea,

  1. what type of Installation are you trying? It's an upgrade or clean Installtion?

  2. what happens when you connect to the system now?

  If you attempt an upgrade installation, then try the update the video card drivers and check:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  You can also check out the link to the manufacturer to download the drivers:

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.1&product=2.4.1.3.43&ContentType=GPU+download+detail&OSType=Windows+Vista+-+32-bit+Edition&keywords=&items=20

  You can also try running Upgrade Advisor and start the upgrade installation

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Note: This also applies to Vista.

  For more information, see the link:

  Solving Windows installation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-installation-problems

  Hope this information is useful.

• No signal found by HDMI or DVI monitor. Monitor detects the VGA signal very well.

  That is the problem. I used to get a signal from the HDMI cable or the cable DVi on my old monitor.  Then, the signal was there sometimes, and then it isn't.  Now my new monitor does not have an HDMI or DVI signal.  He finds the signal to the VGA and that works.  Any ideas?  Myself and a few others have no idea on how to solve this problem >

  Hello, billiardsnut

  You use a DVI or HDMI adapter?

  Assuming you are using a straight DVI-> DVI or HDMI-> HDMI Cable, try to turn off the computer and turn off the monitor, connect the DV or HDMI, then turn them both.

  Some video cards will not dynamically change on its own, following the steps above will generally establish the proper output.

  In addition, since you mention on your old monitor that it is intermittent, it might be that the digital (DVI/HDMI) port on your graphics card is a failure.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Problem UZ2715H monitor: current input synchronization is not supported...

  Can someone help me with this problem? -"Current input synchronization is not supported by the display. Please change your entry in 1920x1080@60hz or any other listed monitor calendar date according to the characteristics of the monitor. "I get this message when I run a game (for example I always get this message with CS GO), there are a few games that works fine however.

  I have Nvidia GTX 580 graphics card, windows 7 64 bit, so my pc and the monitor are connected with DVI - VGA (for the pc) adapter and VGA cable to the monitor.

  I tried to update the drivers for graphics cards, changing the resolution of 1920 x 1080 60 hz troubleshooting display... still the same problem...

  Any solution will be appreciated.

  Ok. A DVI to VGA adapter will not work. DVI cannot convert to RFP via a straight through cable. So, your only option is this =
  Computer DVI GTX 580 on-->--> UZ2715H HDMI DVI to HDMI Cable to

• U2414H - problem with DP and DVI dual monitor

  We recently bought 10 monitors x U2414H with 5 machines Dell Precision T1700 each with a Nvidia Quadro K620 x 2 GB graphics card (1 x output DP) and 1 x output DVI.

  When advised on these machines, we were also told to the DVI work with our monitor, we would need special cable conversion so learned the order of 5 x DisplayPort (male) to DVI - D (male) cable. At the time to take delivery of our new machines, it became that there was a problem with the configuration that we had been sold. When you connect the first monitor to the billboards on the graphics card, it works fine. However, the problem is when you plug the 2nd monitor, nothing is displayed when it is connected to the graphics card DVI port.

  We also called Dell technical support and our account manager to try to solve the problem and they suggested using a HDMI DVI-cables rather than the DVI cable to DP that we sold would not work because of the output frequency. After receiving the 5 x new DVI-cables HDMI question still exists and is no different from before. To remove the graphics card or DVI output being at fault we connected to another single monitor using a DVI to DVI cable and it worked.

  Reading through some of the similar positions, it seems that the monitor that we have been delivered is not the good revision number. I've seen a forum member Dell advises that the revision number should be REV A03 while we have been delivered REV A01.

  Any advice on what we should do to solve this problem will be greatly appreciated.

  EDIT: Added required information
  
  * What is the serial number of 20-digit alphanumeric monitor? CN - 03415 X-74261-4AT - 116L
  * What is the revision number (A00, A01, etc.)? A01
  * This specific computer model, portable office/computer? Dell Precision T1700
  * What operating system? Windows 8.1
  * Which video card? NVIDIA Quadro K620 2 GB graphics card
  * Which ports are available for the video card? 1 x DVI 1 x DisplayPort
  * Which video output port are you using video card for video on the port monitor? DVI to HDMI and DisplayPort / Mini DisplayPort
  * What cable are you using to set the video card to the monitor? DVI (male) to HDMI (male) & DisplayPort (male) to HDMI (male)

  If your Dell account manager allows it, go to the AMD over-pants W4100 would be a good step to solve this.

• I'm running a gateway DX4300 while running the monitor loses signal, etc...

  I'm running a gateway DX4300 while running the monitor loses signal, switch / stop out no computer and computer will not respond unless you unplug the wall.  When you plug the computer into the fans turn on automatically but the computer will not start.

  Hi shermanproffitt,

  Check if the physical connections are connected correctly.

  Try the steps from the following links:

  Frequently asked Questions
  http://support.gateway.com/s/monitor/7005481/7005481faq2.shtml

  Desktop computer - no POST / no video
  http://support.gateway.com/s/checklists/BPC/ck2007050376.shtml

• My screen goes black and I see "No signal", then it turns back on.

  I have a new laptop with dock at work. I am running Windows 7. For some reason, while I'm working, the monitor will freeze, go black, then come back. While the screen is black, I see cable DVI and VGM symbols, then the box that says "no signal". Then the screen will come back on. It's very frustrating because he'll do in any program that I am running, and he disobeys the consistent time or frequency. Anyone have any ideas on how to solve this problem?

  Something you can try, is to directly connect your monitor to the laptop and does not go through the docking station. This operation can take a piece of the puzzle of the equation.

• Persistent problems with the Magic Mouse

  I have persistent problems with my Magic Mouse. He often stops followed (i.e. the cursor on the screen does not move when I move the mouse), or the input button on malfunctions (i.e. I don't click and drag, or cannot right click, or when I click on something and that you hold the button down it doesn't "stick").

  I called Apple and they took me through all the troubleshooting steps (reset the SMC, PRAM, etc.) and I finally get a new mouse. I got a new and have exactly the same problems!

  The ONLY thing that solved the problem by restarting the computer, or logging in and out. But the problem then begins again after anywhere from a few minutes to a few days (the most often within hours).

  Any ideas?

  Here is more information in case it is useful:

  • I plugged a wired Logitech mouse, and to my surprise, it also does not work. I thought that the problem was related to the wireless/Bluetooth connection, but this clearly isn't.
  • I have a Wacom tablet attached to my computer, and it works very well, no matter if it has connected (via USB dongle) wireless or wired (via USB).

  There seems to be something wrong with any particular software/system control the mouse.

• Have laptop HP 210-4150NR, Apple Cinema 2004 monitor, VGA to DVI, still non-functional.

  Computer HP laptop 210-4150NR does not seem to run the monitor Apple Cinema 2004, with apparently correct adapter. Is this true?

  I see these adapters all the time and I can never make sense out of them. VGA is an analog and DVI is a digital signal, they are not compatible.

  Here's an example of what to, in this case, it only HDMI, but a converter for HDMI to DVI is also necessary for you Apple display, unless the monitor has an HDMI input.

  The only real difference between HDMI and DVI is that the DVI signal only carries the video, this is a very basic explanation.

  http://www.Amazon.com/audio-converter-support-1080p-output/DP/B0057UNQ18

• Input DVI does not?

  Hello. I have my desktop connected via the VGA port. I am trying to connect my XBox 360 to the entrance with a DVI - Vga adapter DVI and vga switch xbox plug. When I turn on the XBox and try to switch to the DVI input, he says there is no input signal. No reason?

  A DVI port on a monitor must have DVI or HDMI as a source, a VGA source on an xBox will not lead the DVI input on monitor.

  VGA-> adapter-> DVI = No.

  DVI-> adapter-> VGA = OK

  There is only one monitor that HP has recently who would do what you want to do, and it's the w2558hc. This is the DVI input is DVI - I, all others are DVD - D.

  See you soon,.

• Google Calendar becomes inactive in Firefox. Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.

  Google Calendar becomes inactive in Firefox. Can not navigate, cannot change the appointments, can only view an appointment, then freezes and nothing is more possible.
  Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.
  Firefox 28.0, Windows 7.
  Google Calendar is OK in Android and syncs with my PC OK.
  Works fine in Internet Explorer.
  Please notify.

  The extension Freeven pro is probably the problem. Only that disable and check again.

  If you have the same problem after having disabled the extension pro Freeven then, disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  In safe mode hardware, acceleration is disable by default.

  Thank you.

• Satellite C850D-11 q keep loses the WIFI signal

  Toshiba Satellite C850D-11 q BT Hub 4 Realtek drivers

  I lose the wifi signal at least twice a day. Same message to loose / broken cable and reset the wireless card. Realtek has informed me that I have the latest drivers. The present is Realtek RTL 8188CE Wireless Lan 802.11n PCI-E NIC hub is new. With the help of BT, I now use the 5 GHz as the hub is on a shelf just below the laptop.

  I don't know what to do else and thought someone here can get an idea of what to do next apart from the change of servers!

  Thank you

  LEA

  I wait too long? Has decided to search for updated drivers. Goes up to 8.1 not 10.

  Then decided to download the manual. Informed, there was one, but there is no way to access it. Message received this laptop modified 10/15/15. Well thank you very much for this. Message also States that "with this tool, you will get urgent information about updates for your computer. I clicked... Web page could not be found.
  Large. Because buying a new laptop, but it will not Toshiba, that's for sure.

  LEA

• When I disconnect the monitor Samsung, laptop monitor loses the office.

  I use a laptop Toshiba Satellite L645-S4102.  I have been using an external Samsung monitor for a while.  I need to use the laptop for a presentation only.

  I can change to the screen of the laptop or use the Samsung monitor and the laptop monitor as long as my computer is connected to the Samsung monitor.

  But, when I disconnect the monitor Samsung, laptop monitor loses the shortcuts on the desktop and the taskbar and shows only the background.  I tried to restart the computer, but the same thing happens.  As soon as I reconnect the Samsung screen, everything happens very well again.  Ideas please.

  Start with the extra monitor connected and used.  Then go to your desktop and follow the instructions below:

  1. Click background, choose the resolution of the screen.
  2. In the graph at the top, click on your laptop screen (if you don't know who is who, click "Identify" and click the monitor displays on the screen of the laptop).
  3. Check the box "use as primary monitor" and then apply the change.

  The bar of tasks and other items still show on the main monitor, so this will ensure that your laptop screen is considered to be the main.

  If necessary (unlikely but it could happen), repeat these 3 steps again when the additional monitor is disconnected.

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...