Personalized workspace - monitor double pallet locations

Similar Questions

• Personalized workspace problems

  Hello

  I'm working on a Mac trash, CC15 from Adobe 2013.

  I have a workspace personalized and several times a day, I have a problem any. When I try to right click to add a transition or right click on a track to display the properties and etc, this isn't working I can't right click. Otherwise if I was using a tool other than the selection tool it will be my tool, even when you select another tool. Has anyone concerned with that? When I change the default workspace it works fine but it does not solve my personal workspace unless I'm closing the first.

  Thank you

  Remove the custom workspace and make a new one.

  See if this will help.

• Save the Pidgin (im) text in the database (or personal workspaces) vs log file

  Nobody knows the "beectl" command (active user preference) or activate the transcripts so Pidgin IM text is saved in the database (or personal workspaces) vs log files?

  For the service:
  beectl > modify_property - component _ImService name ArchivingEnabled set to true
  beectl > activate_configuration

  For each user (xxxxxxx), point the transcripts to a folder in their personal workspace:
  beectl > add_preference_property - PRF set = InstantMessage, user = xxxxxxx.
  name archive_enabled type BOOLEAN - true
  beectl > add_preference_property - PRF set = InstantMessage, user = xxxxxxx.
  name archive_folder type identifiable\
  -value "FDLR = ArchiveFolder, workshop = xxxxxxx PersonalWorkspace, enpr =... »

  First create the folder, it is not created on demand.

  Paul

• Missing personal workspaces after upgrading

  I installed the updated bridge on 19 July and when I started the bridge it's like again. None of my saved workspaces are here.  I've had several different according to the work I was doing so it's a bit frustrating.  Is any way to find them.  I'm on Windows and the output of the bridge is 6.3.0.177.

  Workspaces are normally located in

  c:\Users\YourName\AppData\Roaming\Adobe\Bridge version\Workspaces\

• Personalized workspace, an image file to fit the area?

  iMac 27' OS Lion CS4 - I built a new custom workspace where I have about 10 pallets on the desktop, and unlike my old Mac G5 Tiger running constantly, when I open an image file, it occupies the entire screen (based on the original size) and occupies space as under the pallets. I would like for the image to open or if not open then when I hit cmd + 0 for "screen adjustment" while it occupies only the area of the screen which is free. help please.

  I just tried it on my iBook. The script works in Mac Photoshop. Just open your Photoshop folder in the Application folder, drop the script into Presets > Scripts > Scripts events only and then open Photoshop, open the Script event handler. The Windows and Mac versions work the same. Follow the settings in the example of Windows. Close and restart Photoshop, and it will work.

• hp 2311 to connection of DVI - i monitor double

  Hp 2311 monitor\has a dvi - i port. This monitor does support dual link or single link or both according to the type of used dvi - i cable?

  Thanks, Jeff

  There are at least three different models of monitors HP 2311... 2311 x, 2311xi, 2311gt. Please refine it for us by providing a complete model number or product number.

  Assuming you have the HP 2311 x, your monitor supports only DVI - D, HDMI, and VGA video input connectors supported. DVI - I is a form of DVI that carries analog and digital signals. I think you mean your monitor has DVI - D and supports single-link or dual-link.

  Dual-link is to a high bandwidth scenarios... very high resolution (usually 2 048 × 1 536 and above) or refresh rate high (usually 80 Hz and higher). Your monitor does not support high resolution or high refresh rates, so it's more likely supports single-link only.

• HP Laser 1606, Swap double shelf locations?

  Primary (top) allows up to 20 sheets, while the secondary can contain 250. I am trying to print documents that are either letter and legal. How can I Exchange locations? I need less of mentions of the letter.

  Hi MissVP,

  No, I'm sorry this printer trays are ran by the same printing mechanism. You will need to load a sheet of legal when you want to print legal. Some of our officejet models may come with a second paper like the Officejet 8600 tray. See the link below for more information.

  http://shopping.HP.com/en_US/Home-Office/-/search-SimpleOfferSearch?PageSize=15&search=&searchterm=8600

• How to set up my new LCD TV as a monitor double (extended)?

  I got the splitter VGA of Radioshack and hooked up to my new LCD TV but it works as a mirrored display.  I want to use it as extended display.  How can I do this?  Customizing the control panel shows as a single screen.  I can only see responses on laptop but I had a desktop PC.    Thanks for sharing your knowledge.

  Given that you tell us exactly which product you have purchased, my best guess is that the splitter you bought is not really a video display device but a splitter that transforms a signal of monitor in two.  In this case the two screens will be duplicates and there is no way to force them to become different views.  You need a real display adapter that provides its own signal to do so.

  "PhoenixKim" wrote in the new message: * e-mail address is removed from the privacy... *

  I got the splitter VGA of Radioshack and hooked up to my new LCD TV but it works as a mirrored display.  I want to use it as extended display.  How can I do this?  Customizing the control panel shows as a single screen.  I can only see responses on laptop but I had a desktop PC.    Thanks for sharing your knowledge.

• calibration of the monitor double u2713h... need help with the same look on the two

  bought the 2 monitors at the same time and just installed the software from dell.com and calibrated to both of them using the i1 display pro.  used in step by step instructions on photographylife.com and it seemed to do what it was supposed to.  picked native and 120 in the first step for the two, crossed the two monitors and save profiles on each cal1 named 'left' and 'right '.

  However the monitors alike.  the image of my right is slightly warmer and brighter.  How can I get it so that both monitors are similar?  should I do the advanced calibration?

  TIA

  DEVELOPMENT expenses calculated that lut3d is not so precise about white point. White point DCCS target drift is an old question, it goes the same for grey neutrality. It is a software problem that Dell (& Xrite) are not willing to fix. Run a check with ArgyllCMS/DisplayCAL for each screen test, then you will see how different are the white dots.

  Order IR to match 'white' for your Dells, your best choice is to use calibration LUT of graphics card. Ned to do this properly, you can:

  -a Quadro or ATI/AMD graphics card. If you do not have one, you don't get the strips, no mater what monitor you have. So if you have an iGPU intel or a nvidia Geforce... Sorry for you.

  -a calibration & profiling software that makes use of a good spectral correction for GB - LED. Spectral correction of XRite for GB-LEDs is called 'RG_phosphor '. For example: i1Profiler or ArgyllCMS/DisplayCAL (v2.6 or v3.1, the latest is less functional, too mandatory 'clicks' to do the same thing)

  The easiest way is to do the calibration in "custom color" OSD mode which gives you access to RGB win & offset controls for each monitor.

  Uniformity cannot be resolved. This way you can get a 'better' white screen central match point (where you place the colorimeter) but if you have a more red/green shift on the left side of the screen, it may seem as if no white screens don't match not if seen next to each other.

• Personalized workspace copy to other machines?

  Hi all

  I'm looking for advice on the copy of workspaces customized in first Pro CC - version June 2014.

  My client would like to create a series of custom workspaces (iMac) and then copy them into a series of identical machines - the same size of the screen.

  I believe that these provisions are in an XML file?

  A member of staff can correct paths (Mac and Windows would be useful) and advise if there are problems in doing this?

  Thank you very much

  Mike has.

  Check out this thread on Creative COW.

• Personalized Workspace ES2 directory

  Hello

  This is a dummy question,

  In which directory of LiveCycle ES2 can I save my custom workspace ear file?

  In LiveCycle 8.2 was the C:\Adobe\LiveCycle8.2\jboss\server\all\deploy

  Thanks for any help!

  On a turnkey installation, it's C:\Adobe\Adobe LiveCycle ES2\jboss\server\lc_turnkey\deploy.

  Hope that helps!

• Personalized workspace

  I just to Illustrator, Coreldraw and so I'm used to working in a particular way.

  In Corel working space is virtually unlimited. It's like I have a huge white table without terminals where I can build and spread the pieces around here and there. Gathering all my various items that I will gather on my page or document.

  Being new to Illustrator it seems to me that my work space is limited to the artboard.

  Honestly, I'm OK with the concept of the artboard, but the area outside the artboard is dark. Do not invite as a place to set elements side for later use.

  So I guess my question now is; set the area outside the artboard to be white?

  Yes, in Preferences > User Interface > canvas color. Select 'white '.

  Your work plan can be up to 227 "x 227".

• Personalized workspace - Logout

  Hi all

  I have created and deployed a custom look and everything works fine except if a user press logout.

  

  Inside the log file, it always seems to try to hit mycustomapplication/main.html.  I don't see in the documentation that need to add something specific to the configuration file for the disconnection or the whitelist page.  Anyone run into this and found a solution?

  

  It's on LiveCycle ES3 SP1.

  If everyone runs to this I found the solution.  When the compilation of the ear again in flex or flash builder make sure set default values in the web.xml file.  The documentation says only consider replacing the values and it doesn't tell you why or why not too.

  The values in the Web.XML that require an update are the source_url and the login_url.

• macros personal

  Hey,.

  I would like to open a PERSONAL.xlsb macro to manipulate data to a TDMS file is imported into Excel (via import add-in for TDMS files). Everything must go automatically, but the problem with import add-in for excellent TDMS files is that it always opens a new excel worksheet.

  This is why I made a macro in a personal workspace, this file is located in: C:\Users\User_name\AppData\Roaming\Microsoft\Excel\XLSTART

  These macro can be opened in each worksheet, but I have difficulties to open this personal kind of macros, I always get an error saying that the macro is not available or it is turned off. I changed the options in Excel macros security to ' all running macros ' and yet he won't open it.

  I'm using Labview 2010 and Excel 2010, the files are in the attachment, if you want to try the programe the path must be changed.

  Did someone knows a solution?

  Sorry about that!

  It is better now?

  Warning: The example Code is provided as is. It has not been tested or validated as a product for use in a deployed application or system, or for use in dangerous environments. You assume all risk for use of the Code and the use of the Code is subject to the license terms of Sample Code which can be found at:http://ni.com/samplecodelicense

• Secure the workspace / personal work space issue

  Hello

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/47561/als1342454475197.jsp

  Based on the secure and personal workspace.

  I have an application that works perfectly well in the 'personal workspace". It can access PIN, etc email account, and there is no problem.

  Worksapce Secure: the app works that for secure electronic (BES 10 account). In this workspace, it cannot send PIN messages. I tried the code hard pine account information based on the personal workspace , but in the workspace secure but he simple does not work.

  (1) is this a feature where the secure workspace is only for secure electronic and not Message of pine?

  (2) in the personal account PIN of the workspace is visible in different types of Type::Messages account but in Secure, it shows only 2 accounts of secure e-mail and text Message account. No account of the Pine Message.

  Is this feature or bug in BlackBerry?

  (3) blackberry Hub in the secure workspace and the personal workspace , it shows the same content. Based on the docs Blackberry Hub for two workspaces must be different from the other.

  Can someone BlackBerry shed more light on this. I'd put logs with more information later with App running in secure work space and personal work space.

  Hello

  I received a reply from Blackberry on this issue. It all depends on how you define the work and personal work space. The setting is based on Blackberry Enterprise Server 10. Here is the pdf file

  http://Br.BlackBerry.com/content/dam/BlackBerry/PDF/BB10-regulated-EMM-datasheet.PDF

  Balance: Personal and work

  Regulated balance: personal and work but work has access to the PIN, sms etc.

  Direction: Work only. Work has access to everything.

  Under regulated enterprise-level mobility Blackberry 10 management control and setting , you will see different options for allows PIN SMS work or space. And then I guess her you should be able to have access to the PINS as well as SMS messages.

  I can confirm this once I have test the build that I have developed.