PES 11 Editor fails to restart after release

Similar Questions

• Windows failed to restart after installing Nokia PC Suite

  Hello world

  I hope you can help me with my problem. I have an old nokia pc suite version family installed in my laptop (about 6 years old - basic Windows Vista Edition operating system), but today I decided to upgrade to the latest (suite version 7). I was able to install it successfully. When I launched the app, it worked fine, but when I plugged my phone (Nokia X 2) via a USB cable which has been when I started having problems. When I inserted the usb cable provided with the phone to my laptop, a prompt appears that my machine was installed the drivers for my device. After about 5 minutes, the installation is complete and it prompted me to restart my computer and so I did. Before it turns off, the machine said he finished the updates first and then he did. When he returned, Windows doesn't have to load and restart my computer.  The full error message: "cannot start Windows. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose the language settings and then click on "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: ntoskrnl.exe
  Status: 0xc0000098
  Info: Windows could not load because a required file is missing or corrupt. »

  I already followed the instructions I have the disc with me, but my laptop still does not work. I did repair the boot and system restore, but it does not solve the problem. Please help me. Thank you very much!

  Hello

  I suggest to try to start the computer in safe mode and check if you can start:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Since you've already tried to repair the boot and system, restore and if you are not able to start the computer in safe mode, then try to contact the manufacturer for help.

  It will be useful.

• VMWare Workstation fail to restart after suspend

  I'm using VMWare Workstation 7.1.1 build 282343 on a laptop Windows 7 Ultimate x 64 (8 GB). I run my VMS machines from a disk external eSata. My VMs are all Windows Server 2008 x 64. When I finished work I suspend the virtual machine, stop VMWare Workstation, then disconnect the eSata drive. It is, whenever I just restarted the VM, I get a message that is not possible to restore and I give myself the opportunity to "get rid" or retry - retry fails, so I have to throw. It's embarrassing because it then takes a boot for a long time the virtual machine from scratch.

  Any ideas how to solve this problem?

  disable USB-support for this virtual machine and start again

• Satellite T130 - failed to restart after HARD drive recovery

  Hello

  I used the Toshiba HDD Recovery tool for reinstall windows 7 on a recovery partition. Everything went well until the end when the pc restarted and would not restart. So now that I'm stuck, I can't access f8 more.

  Any suggestion?

  Thank you

  Andrea love

  Hello

  And what exactly is happening now? You have a black screen?

  To me that sounds like it, something goes wrong in the installation of HARD drive recovery then I recommend reinstall Windows again since the middle of recovery that you created on USB or external CD/DVD drive. This can restore Windows again.

  Theoretically, it could also be a hardware problem but I would try the middle of recovery recovery facility that s my personal opinion. ;)

• Satellite L300 - driver Open Webcam fail. Restart the computer or the camera

  Hello

  I recently bought a new Satellite L300 under Windows Vista Home Premium SP1. The Webcam worked fine for a few days and then the next time I booted up Vista, I get the following error "Webcam driver open fail, please restart camera or computer. Since the computer is new I reformatted to see if it wasn t a program is blocking something.

  Reformat 2 times and the error still ride on the installation of the Camera Assistant Software for Toshiba. I downloaded the update from Toshiba support file but still the same error. The funny thing is that the Device Manager does not detect even the webcam. There is no registration for the webcam. How will I know that it is a hardware problem? Does anyone have experience with this problem?

  The store that I bought it offered to give me a new, but do not have any in stock, so I have to wait 3 weeks.

  Thank you

  Hello

  The webcam must be listed in the Device Manager. It s not called not webcam but you should find it in the imagery of the devices-> USB video device

  The webcam should work fine. Usually after installing the webcam software, you should find the webcam software in the MSCONFIG-> startup
  If the webcam is listed here then that would mean that the software/driver webcam still load during a laptop boot procedure.

  In some cases there could be a compatibility issue between this software and a 3rd party applications like MS messenger or Skype for example.

  In your case, I recommend you to disable the webcam and other applications such as MS messenger or Skype software in MSCONFIG-> startup.
  Then clean the BONES and the registry using the CCLeaner.

  I also recommend the Vista update to the last State. All fixes and patches must be installed!

  Finally if you want to use the webcam then you could start the software manually.
  Exe file must be placed in Camera Assistant Software.

  Best regards

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000007f

  Get a BSOD on Windows Server 2008 R2 SP1 with "the computer restarted after an error checking.  "The bugcheck was: 0x0000007f (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050033, 0xfffff800018c3484).

  -a ran the system file without error checking

  -a ran diagnostics material without errors

  -all updated hardware drivers

  -windows update updates

  -a ran chkdsk on drives without errors

  I excluded the material with Dell.

  I have the minidumps available if it lights all but check these in the BSOD Viewer, it shows.

  Bug control chain: UNEXPECTED_KERNEL_MODE_TRAP

  Bug check code: 0x0000007f

  Parameter 1: 00000000'00000008

  Parameter 2: 00000000'80050033

  Parameter 3: 00000000' 000006f8

  Parameter 4: fffff800'018 c 8484

  Caused by the driver: ntoskrnl.exe

  Caused by Adresss: ntoskrnl.exe + 75bc0

  Might try to uninstall the AV as another post suggested - will show the result if all of the changes.

  Any ideas what this could be?

  Crash dump...

  The debugging session: 18:40:29.750 Thu Jul 3 2014 (UTC - 04:00)
  System Uptime: 0 days 20:07:06.256

  Loading the kernel symbols

  BUGCHECK_STR: 0x7f_8

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP

  Nom_processus: ledgers.exe

  CURRENT_IRQL: 1

  LAST_CONTROL_TRANSFER: from fffff800018d0169 to fffff800018d0bc0

  Msinfo32.txt

  07/03/2014 17:22 application Error Faulting application name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  The failed module name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  Exception code: 0xc0000005
  Offset: 0x0000ad75
  ID of the process failed: 0 x 8940
  Start time of application vulnerabilities: 0x01cf96bab4486883
  The failing application path: C:\Program Files (x 86) \Client\Ledgers.exe Prophet
  Path of the failing module: C:\Program Files (x 86) \Prophet Client\Ledgers.exe
  Report ID: a9efac34-02d6-11e4-a027-a4badb445132

  28/06/2014 18:53 application Error Faulting application name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
  Exception code: 0xc0000005
  Offset: 0x00014ab0
  ID of the process failed: 0x21c0
  Start time of application vulnerabilities: 0x01cf92d1ba345f0a
  The failing application path: C:\Program Files (x 86) \Prophet Client\Ledgers.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 866145fa-fef5-11e3-9b5a-a4badb445132

• How to check remotely that a computer has been restarted after Labview LIFE 2011 has been installed on it?

  Hello

  I'm deploying an application Labview 2011 on 150 XP machines in various plants worldwide. Currently, all the machines still have an old 8.21 Labview runtime (+ old DAQmx). I sent a procedure to my colleagues in the plants so that they fit the new runtime environment (+ new DAQmx). For my part, I built a code to check my PC if a certain registry key is present on the PC 150 who told me that the new run installer or not.

  The key I found is:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\Installer\Products\1C5E801AE54C4AE43A59FC169F95CA28]
  "ProductName"="NOR-DAQmx Configuration 9.3.5 Support MAX"
  "PackageCode"="61EEAEC207A28A842B3341ED6809453D."
  'Language' = dword:00000009
  "Version" = dword:0923 c 001
  "Transfer" = DWORD: 00000001
  "AdvertiseFlags" = dword:00000184
  "InstanceType" = DWORD: 00000000
  "AuthorizedLUAApp" = DWORD: 00000000
  "Clients" = hex (7): 3A, 00, 00, 00, 00, 00

  It works well but it does not say that the PC has restarted after the Setup has been run. If I do not have to restart the PC and try to run my Labview 2011 executable I get a long error message (NIDAQmx not registered,...).

  As it seems difficult to get the properties of a key to know when it was installed I was leaning rather to check whether or not a certain DLL (?) was recorded. But it's just a vague idea, and I don't know how to set it up.

  I enclose the code that I have and that works well, but cannot differentiate between Labview 2011 installed runtime and PC restarted or not.

  Thanks for the help

  Christophe

  You could look for a file that would be created as part of the installation to determine date/time Setup (ini or another file created as part of the runtime support installed)

  Combine that with a request of availability of the station and you can calculate if the station was longer than the time since the installation. Not perfect, but should be possible...

  http://en.Wikipedia.org/wiki/uptime#Using_WMI

  wmic /node:"my-server" os get lastbootuptime
  

• Computer automatically shuts down and restarts after 5 minutes run time

  Two days ago, restarted my computer, which worked very well for a few hours, (& a few years) suddenly automatically.   He then ran fine for about 4 hours when it restarts again.   He has now made that ~ 20 times, some time to restart after 5 minutes.   It also does if I connect on behalf of my wife, or if I boot in safe mode and log on as an administrator.   As much as I know I have no virus problem, but I can't be sure that it didn't stay on long enuf to run my antivirus program to the end.   Malwarebytes and Superantispyware both showed no problems two days ago, but now they also will not work I tried to backdate the system (System Restore) to last week, but failed, perhaps because I removed an old Norton SystemWorks program two days ago, when I got hurt, because I thought that maybe that's the problem.

  Is it a hardware problem or software?

  Now, I am trying get useful data on the device by frustrating bursts of 5 minutes.   Windows XP, service pack 3 with automatic updates.

  Thanks for any help.

  As a follow-up, I now declare that apparently the drive was packing with something irreplaceable on it grilled, so I'm ready for a new machine.

• Phone keeps restarting after the last update

  After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
  HELP ME GUYS!

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• Every moment & then my Vista Original fails to start after an automatic update & shutdown.

  I had upgraded from XP to Vista Home Premium.  All updates are on. I also use Microsoft essential security such as anti-virus protection. Every moment & then my Vista Original fails to start after an automatic update & shutdown. I had to reinstall all my programs. Happen 3 - 4 times in less than a year. The disturbances windows also does not work

  Any Advisor. Should I upgrade to XP?

  Hello

  Make sure that you do not install hardware 3rd party via windows update drivers

  they are normally not up to date and can cause computer problems

  change the way you receive updates and check what you install ad if you don't not right-clicking on UAC prompt you to hide it:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  and if you're still stuck in a loop non-Boot read these methods on how to try to fix it:

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ;

• HELP PLEASE! The computer was restarted after a bugcheck.

  I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.

  That's the message in the event viewer:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.

  This is the message that is displayed on windows re-opening after the accident:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFFFFFFFFFFD0
  BCP2: 0000000000000001
  BCP3: FFFFF800016DE0CC
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 272_3

  Files helping to describe the problem:
  C:\Windows\Minidump\030413-8765-01.dmp
  C:\Temp\WER-83783546-0.SysData.XML

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
  answers if this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
  Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  PAGE_FAULT_IN_NONPAGED_AREA parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The referenced memory address
  2	0: Read operation 1: Write operation
  3	Address that referenced memory (if known)
  4	Reserved

  If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.

  Cause

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Resolution

  
  Fix a defective hardware problem: if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  
  Fix a defective system service: disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.

  
  A problem of antivirus software: disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.

  
  Fix a corrupted NTFS volume: run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

  Remarks

  In general, this address is in the released memory or simply not valid.

  This cannot be protected by a try - except Manager - it can only be protected by a probe.

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0).

  Original title: windows 7 starts more than 18 minutes take it please help

  It's a copy of errors

  Log name: System

  Source: Microsoft-Windows-WER-SystemErrorReporting

  Date: 03/10/2012 09:19:24

  Event ID: 1001

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: iqraa

  Description:

  The computer was restarted after a bugcheck.  The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 100312-800425-01.

  The event XML:

   

     

      1001

      0

      2

      0

      0

      0 x 80000000000000

     

      5848

     

     

      System

      IQRAA

     

   

   

      0x000000F4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0)

      C:\Windows\MEMORY. DMP

      100312-800425-01

   
  Hello
   
  Did you of recent changes to the computer before the show?
   
  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION: This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.
   

  Refer to this link: http://msdn.microsoft.com/en-us/library/ff560372%28VS.85%29.aspx

  Question: Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  In order to solve the problem in a better way, one must look the discharges with the debugging tools for Windows.

  Please, start Windows Explorer and navigate to the C:\Windows\Minidump folder. Then, copy the files to your desktop, zip dmp dmp all in one zip archive and download the zipfile to your SkyDrive folder [1] public and post a link here.

  If you do not see the dmp files, make sure that your Windows is correctly configured to generate shocks.

  See this link for more information.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  http://support.Microsoft.com/kb/254649

  I would recommend also refer to this article for more information and troubleshooting on blue screen errors.

  Resolve stop (blue screen) errors in Windows 7:   http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

• InDesign fails to start after update (on Win7). Any ideas?

  InDesign fails to start after update (on Win7). Any ideas?

  I reinstalled InDesign and also restarted creative Cloud App.

  Had to happen at a crucial time in date limit!

  Help :-) gratefully received

  The program does not start and immediately gives the error "Indesign stopped working and needs to close."

  In the end I contacted support and they had to fix the program.

• This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure

  I got a 5.1 cluster with some problems HA.

  a few virtual machines are showing this

  This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure.

  When I try to reconfigure HA on the host. It times out and fails.

  any idea?

  Instead of reconfiguring HA on the concerned host, have you tried to disable HA on the cluster and enable again? See: VMware KB: State of the virtual machine changes from protected to Unprotected

• iMac restarts after sleep

  Problems lately with my iMac 27 "5 K. After putting to sleep, it is restarts after about 2 hours.  If I wake up it before that date, it is usually very good. But after 2 hours, it restarts. Sometimes, I find it just be stopped. Most of the time when it restarts itself, it crashes with this gray bar filled about 80% progress.  I have reset the PRAM and EMS, checked all the settings in power management (not set to restart after power failure for example).

  Another problem I 'bypassed' which may or may not be related (I'm including in case it is related) is that on El Capitan, my magic trackpad would randomly wake the iMac.  I had to disable the option to allow devices BT wake up the Mac. When I upgraded to Sierra, the iMac still wake up randomly due to an event of BT. After a lot of trial and error, activate the option "allow bluetooth to computer devices" back prevented the wake-ups at random and let me wake up the computer again deliberately with the trackpad.  Very strange.

  In any case, I'm usually pretty ingenious to resolve this sort of thing myself, but the Console to Sierra news is terrible. Or maybe it's the system logs that are terrible, because I can't find anything about the causes of previous judgment that might provide a clue as to what is happening here.

  So, any advice on how to solve the problem or at least to determine the causes of the previous stop would be greatly appreciated!

  Other information that might be relevant:

  Wired devices:

  USB: 2 external HDs (a WD and a Seagate) for backups TM

  Apple keyboard

  Thunderbolt: 27 "Thunderbolt Display (Apple)

  It's a DVD-ROM of Apple and a trendy optical audio dongle, both

  All 3rd party extensions you are running?

  EtreCheck is a simple little app to display the important details of your system configuration and allows you to copy this information to the Clipboard. It is intended to be used with Apple Support communities to help people to help you with your Mac.

  http://www.etresoft.com/ etrecheck