VMWare Workstation fail to restart after suspend

Similar Questions

• VMware Workstation failed to mount the physical disk 10TB

  VMware workstation or any other product vmware does support more than 2 TB of physical disks?

  I am trying to connect a 5 of 10 TB raid enclosure and mount it on my ubuntu vmware workstation machine. The common error that I receive is when mounting the reader on ubuntu and I think it might have something to do with the size of the file.
  I am running vmware workstation 12 in windows 10.
  The disk is taken offline in windows and I'm under WS as an administrator.

  Error	VMDK CONTENT	DiskPart Info
  Operation failed on the file "\\.\PhysicalDrive1". If the file is located on a remote file system, make sure that the network connection and the server on which resides this disk to work correctly. If the file is saved on a removable medium, link media. Select Retry to retry the operation. Click Cancel to end this session. Select continue to pass the error to the guest operating system. I/o error, dev sdb, sector 11721553632 I/o error, dev sdb, sector 11721552128 I/o error detected. File system stop Please unmount the file system and to rectify the problem (s) metadata I/O error: block 0x2baa8b100 ("xlog_bwrite") error 5 numblks 8200 can not read the superblock	# Disk DescriptorFile version = 1 Encoding = "windows-1252". CID = 6f4a8bb1 parentCID = ffffffff isNativeSnapshot = 'no '. createType = "fullDevice." # Description of the measure RW 23441768448 DISH '\\.\PhysicalDrive1' 0 partitionUUID \\?\scsi#disk & ven_h #w & prod_raid5 #5 & 19bb575e & 0 & 010000 #{53f56307-b6bf-11d0-94f2-00a0c91efb8b} # The database disk #DDB ddb.adapterType = "free". ddb.geometry.biosCylinders = "1024". ddb.geometry.biosHeads = "255".

  ddb.geometry.biosSectors = "63".

  DDB. Geometry.Cylinders = "16383.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.longContentID = "55c8f3052c372c02465d66656f4a8bb1".

  DDB. UUID = "60 00 C2 97 8 a 7 c c2 cb - 9 a 27 51 78 58 a7 e6 3f"

  ddb.virtualHWVersion = "12".

  H/W RAID5

  Disc ID: 00000000

  Type: SATA

  Status: Offline (policy)

  Path: 1

  Target: 0

  LUN ID: 0

  Path: PCIROOT (0) #PCI (1C07) #PCI (0000) #ATA (C01T00L00)

  Current read-only State: No.

  Read-only: No.

  Boot disk: No.

  Disk swap file: No.

  Disk hibernation file: No.

  Crash dump disk: No.

  Cluster disk: No.

  The official version said that WS allows only virtual up to 8 TB of disk.

  According to my own tests, it only limits the size of the VMDK for 'New - VM' Assistant.
  Once you have a greater vmdk - just tried a vmdk 10TB - WS won't complain about the size.
  I don't expect that WS will prevent the physical disks to use inside a virtual machine that is already configured.
  So in your case I think you started WS with a normal user account.
  Try to start as administrator WS - maybe even using the administrator account.
  I think that then it will work.
  Unfortunately, the error messages produced by vmware.exe are not really accurate-, so there is no way to know if you really have a bad super block.
  To test if this is really the problem and not just an error message - poor try to mount the drive directly.
  Please post the vmdk - want to know if there is something unusual about 5.5 TB in the disk.

• Any Installation of Vmware Workstation failed in my machine, why? See the details

  

  Hey guys, I'm trying to install vmware workstation 11,10 even though 9, but unfortunately it shows this kind of error every time.

  then I try to install from appdata/local/temp, but it shows the error of capture4... I tried many things to fix this... but I failed...

  So guys help me please install... sorely lacking...

  is my laptop config: core i5 - 3230M, ram - 4 GB os-win7 64 bit sp1...

  need help please...

  Welcome to the community,

  the problem is probably caused by the apostrophe in the name of the folder of the user. Try at each logon with a different user (temporary) account, or change the temp/tmp environment variable to point to a different directory (existing), for example, "C:\TEMP".

  André

• VMware Workstation 9.0 restarts my PC trying to turn on a virtual machine

  Hello everyboddy! On Sunday, I installed VMware Workstation, Version: version 9.0.0 build-812388 and configured a new virtual machine. I installed Windows 8 Enterprise on it and everything was fine. The same day that I had no problem at all - I have turned on and off the power of the virtual machine without any reboot. But today, when I try to power the virtual machine, I created loads for a while and then suddenly my PC restarts. I tried 3 times and the result was the same. Can you tell me where is the problem and help solve it, please?

  My PC:

  ASUS M3N-H/HDMI

  AMD Phenom 9350e Quad-core 2.00 GHz

  NVIDIA GT240 GDDR3 512 MB

  2 x 2 GB DDR II 800 MHz RAM (only 3 GB usable due to the OS)

  SE host: Windows 7 Ultimate x 86 SP1

  Settings of the virtual machine:

  

  PS Minutes ago I reduced the computer virtual memory to about 1.2 GB and made a new attempt to launch the virtual machine, but that this time he gave me the following error message: fatal error (vcpu-0)

  vCPU - 0:SVM is disabled and locked on this CPU (or something like that)

  And here's the last log file:

  One of your four hearts a SVM disabled and locked.  The other three are not.  You should be able to run virtual machines using the binary translation (set the execution mode privileged binary translation under VM-> settings-> processors).  However, you will get into trouble if you try to use (SVM) hardware-assisted virtualization.

  Have you checked for an update of the BIOS?

• VMware workstation vm not listed, after migration

  The Organization has just migrated my pc. Migration of post that vmware workstation console is not listed the virtual machines. The migration involved, creating a new user in the new field that seem to have created the problem. The migration has been copied on my stuff together of old of the user for new users. So, I always files vm for the virtual machine to C:\Users\my-new-user\Documents\Virtual Machines.

  To start the virtual machine, I created a new virtual machine using the hard file. This seems to start the virtual machine where I left. So, in summary, I'm looking for:

  1 / how to list all the virtual machines on the console of vmware worstation as before for the new user

  2 / when I re - create a new virtual machine using a hard disk existing a VM, I see many files as hard

  vmname.VMDK

  vmname - s001.vmdk

  vmname - s002.vmdk

  .

  .

  .

  .

  .

  .

  vmname - s025.vmdk

  
  

  Should what file I use? I used the "vmname.vmdk" to create and it works
  

  If all the files have been migrated, you don't need to create new VMs. simply open the configuration (.vmx) from the file menu of VMware Workstation virtual machine files.

  André

• VMWare Workstation does not work after successful installation

  Hello world

  I installed VMWare Workstation 6.0.5 on Win XP SP3 with success, but the program itself does not start, I get no error messages, just nothing happens. Nothing in the logs of the system either.

  When I tried to run the program in Mode safe mode, it worked!... (obviously impossible to start a computer V, but Workstation started very well)

  any ideas?

  Thank you

  Hello

  I think I just found the reason... and a deaf mute.

  I have installed many programs of news lately for the WebCam and connect it to my DirectTV DVR.  So I did not understand that the wrong software belongs to but think it is the WebCam install stuff that belongs to Live Messenger.

  Anywho, the process that prevents any software vmWare installation or execution was "FixCamera.exe".

  Once I have debug more I will update this list.

  It's by chance luck that I found that I was killing various thought process that it could be linked to the virus filters.

  Kind regards

  David

• Windows failed to restart after installing Nokia PC Suite

  Hello world

  I hope you can help me with my problem. I have an old nokia pc suite version family installed in my laptop (about 6 years old - basic Windows Vista Edition operating system), but today I decided to upgrade to the latest (suite version 7). I was able to install it successfully. When I launched the app, it worked fine, but when I plugged my phone (Nokia X 2) via a USB cable which has been when I started having problems. When I inserted the usb cable provided with the phone to my laptop, a prompt appears that my machine was installed the drivers for my device. After about 5 minutes, the installation is complete and it prompted me to restart my computer and so I did. Before it turns off, the machine said he finished the updates first and then he did. When he returned, Windows doesn't have to load and restart my computer.  The full error message: "cannot start Windows. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose the language settings and then click on "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: ntoskrnl.exe
  Status: 0xc0000098
  Info: Windows could not load because a required file is missing or corrupt. »

  I already followed the instructions I have the disc with me, but my laptop still does not work. I did repair the boot and system restore, but it does not solve the problem. Please help me. Thank you very much!

  Hello

  I suggest to try to start the computer in safe mode and check if you can start:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Since you've already tried to repair the boot and system, restore and if you are not able to start the computer in safe mode, then try to contact the manufacturer for help.

  It will be useful.

• PES 11 Editor fails to restart after release

  Organizer and editor of launch after the computer restarts. But after the release of the program, one Organizer will re-launch-editor will not. The PROCESS of PES editor continues to run in the Task Manager, even AFTER I close the editor. - and if I COMPLETE the process in the Task Manager (or reboot) the editor will then launch. Did a clean install. Problem persists.

  SOLVED BY THE PERMISSIONS CORRECT!   Suggestion of chat Adobe M. Halid response: Program Data (x 86) / Adobe/Photoshop elements 11/PhotoshopElementsEditor.exe/ RT click/Properties/compatibility/try to change the compatibility mode: run as Windows XP3 - but this does not work - editor would not launch.

  Tried: Run as Administrator /: that alone did not work - then also added ' change the permissions for "all users": (click on: "change settings for all users" / then click on the next window: run as administrator).» Who has worked for the Publisher - but the Welcome screen would not work now and PES 11 would not launch. SO:

  Then to Program Data (x 86) /Adobe / and made the same changes to PES 11. exe and PES 11 Organizer.exe.

  At that time the editor and organizer of launch and quit and relaunch and working normally! More persistent ongoing process. Thanks for all your suggestions and help.

• Satellite T130 - failed to restart after HARD drive recovery

  Hello

  I used the Toshiba HDD Recovery tool for reinstall windows 7 on a recovery partition. Everything went well until the end when the pc restarted and would not restart. So now that I'm stuck, I can't access f8 more.

  Any suggestion?

  Thank you

  Andrea love

  Hello

  And what exactly is happening now? You have a black screen?

  To me that sounds like it, something goes wrong in the installation of HARD drive recovery then I recommend reinstall Windows again since the middle of recovery that you created on USB or external CD/DVD drive. This can restore Windows again.

  Theoretically, it could also be a hardware problem but I would try the middle of recovery recovery facility that s my personal opinion. ;)

• Failed installation of VMware Workstation 9 on new install of win 7

  I looked at the discussion of installation has failed VMware Workstation 9, verified that I am administrator, cleaned folder and looked at the registry and I'm still having problems.  The name of the account used is not Admin/Admin or anything close.

  This is a new installation today of windows 7 with all updates applied.  Avast is my anti-virus software.  The behavior does not change with it running or disabled.

  I think that the problem to be that KLM/Sofware/VMware Inc. does not appear.  I checked that I can create keys.

  "In my installs I've seen: message" failure of the MSI MSI "and once"the MSI MSI failed. "  Authorization of VMware (VMAuthService) failed to start service.

  Here are the logs from my last install.

  Can someone provide me with more information about the problem and how to get this installed?

  Thank you

  Finally got this resolved after many setup logs sent to VMware.  I came across the registry problems and VMAuthdServices fail to start due to software AV.

  In short, following http://kb.vmware.com/kb/1031302 (KB1031302) is important as well as some comments from howellrj.  Here's what I did in detail and why during my various tests of installation:

  http://KB.VMware.com/kb/1031302

  1 I used the only account on the system, which did not have a name as owner, admin, administrator, which has administrator privileges

  2 wiped % TEMP % whenever I made an attempt to install

  3 MS KB 942288 not recommended for Win7 so I jumped

  4 no earlier version of VMware Workstation has been installed on the system, so I jumped

  5 ran http://support.microsoft.com/kb/2438651/en-us (MS KB2438651) whenever I made an attempt to install.  He has never found anything wrong

  6 was not running WinXP so I jumped

  7 has made run msconfig to disable all services and should follow https://support3.avast.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=1334 (Avast KB1334) to disable Avast self protection mode.  Even with Avast protection auto mode disabled and all the disabled Avast shields were always running and prevent.  The only way to clear the checkpoint was to remove Avast completely.

  8 I ran sfc/scannow before each installation to be sure.  No problems have ever been found.

  So, here is what I did to get the software installed successfully:

  An item copied to my system

  1 AV Installer on my system

  2 use FixIt of MS KB 2438651

  Disconnected the network B

  C restart the system with network not connected

  D removed Avast

  E to restart the system with network not connected

  1 erase TEMP

  2 Ran FixIt utility of MS KB 2438651

  3 ran sfc/scannow

  F install VMware Workstation

  G restart the system

  H check VMware Workstation starts

  I install Avast

  J stop the system

  K connecting to the network

  L reboot the system with connected network

  M update Avast

  N reconfigure Avast

• VMware workstation for the passage of the VCP4

  Hello

  I have a small question. I passed my VCP4 exam in August last year and I intend to go to VCP4 course later this year.

  I heard that each secure Channel will receive free VMware Workstation.

  I always receive VMware workstation free of charge after completing all requirements for VCP4? What version I will get 7 or 8?

  Thank you

  Pawel

  for VCP4, you will get a license Workstation7

• Installation of VMware workstation in a machine with vmware server 2.0 is already installed?

  is it possible to install the latest version of vmware workstation (I guess that's 6.5) in a machine where vmware server 2.0 is already installed? where possible there at - it something I should know before installing vmware workstation (eg. problems known, network suspends etc.)? in particual I am a little concerned network mangement (eg. both vmware server and vmware workstation in fact add virtaul adapters: is a possible trouble caouse?). The host of the virtual machine is vista ultimate x 64 with 8gig of ram and a quad core cpu.

  I did a little research, and from what I understand, this was not possible with vmware server 1.0 x.. as the situation has changed with vmware server 2.0?

  (in case you are wondering why I sholud be willing to do):

  I worked with vm ware Server 2.0 for about a year, but now I miss some of the features that are only present in vmware workstation: multiple snapshot and clone VM vm ware server... However is much more flexible when you don't have physical access to your VM host... so I was wondering if it is possible to get the best of both worlds : I would like to use vm ware workstation allows you to configure virtual machines and manage snapshots and vmware server to remotely manage virtual machines, I've created with workstation. Is it not possible?

  Thanks in advance for your attention

  We discussed some time ago

  See this post for the results

  http://communities.VMware.com/message/1309546#1309546

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Guest Windows always opens at 640 x 480 after restart of VMware Workstation?

  Whenever I do this sequence of operations, my guest operating system comes in the resolution of 640 x 400 lean instead of the usual 1400 x 1050.

  1. Stop or suspend my Windows prompt (Windows XP Professional SP3)
  2. Leave VMware Workstation (version 10.0.1 for Linux)
  3. Restart my Linux (Ubuntu 13.10) host
  4. Restart my Windows XP guest

  This happens even if I simply suspended the guest (as opposed to closing) before the quit/restart.

  It did not used to happen; as in recent months.

  At the same time, I run a Windows 7 guest in another tab (if it goes through the same procedure), and it comes in full resolution.

  Any ideas? My vmx configuration file is attached.

  I solved the problem by downloading QRes and running in Windows XP prompt:

  "C:\Program Files\QRes\QRes" / x 1050 1680/y

  This has not only changed the resolution once again, it seems to have solved the problem completely each time you start.

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• 15 Ubuntu won't start in VMware workstation 12 after a recent update of Ubuntu

  I'm quite new to the environment virtual system and linux. Someone could me help on my question below?

  I have a virtual system installed using VMware workstation 12. It works fine, until the upgrade of Ubuntu this morning.

  I have no idea what the update installed.

  After the required reboot, Windows VMware has always stop a black page.

  Before everything, there were some posts that I think they should be useful to target the issue here.

  

  He said:

  SMbus host controller not activated!

  No valid rapl area found within the package 0

  Thank you very much for your help!

  -Ninggang

  I found a solution!

  There is problem of ubuntu, new kernel is bad and it's a bug.

  To start again just hold SHIFT while your machine virtual machine to the menu shows ubuntu boot.

  Select Advanced, then choose more old kernel version and that's all.

  After you restart your virtual machine it always start on black screen, you need to delete newes kernel version linux-headers - 4.2.0 - 30 to begin on the old version and problem SOLVED!

  remove the kernel:

  sudo apt-get remove linux-image-4.2.0-30-generic
sudo update-grub2

  reboot.